User manual LA CROSSE TECHNOLOGY WS-8055U

[. . . ] 3) If there is no WWVB reception, manually set the time and date (instructions in the Program Mode). 5) Place the WS-8055U in a suitable location, where WWVB signals can be received. 3 DETAILED SET-UP GUIDE I) BATTERY INSTALLATION Note: To avoid start-up problems make sure that the batteries do not spring free. A) MOON PHASE CLOCK 1) Remove the battery cover, located on the backside of the unit. Note: After the batteries have been installed a tone will sound, and all the LCD's (Liquid Crystal Display) will briefly light up. [. . . ] 2) Press the "+" button to toggle through and to select the desired language. There are 3 languages to select from: US F E English French Spanish 3) Press the "SET" button to confirm the language setting, and to advance to manually set the time. V) TIME SETTING Note: When the WWVB signal is found, that time will over-ride the manually set time. 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 3 more times, until the hour "12" flashes in the time LCD. Note: when setting the hour, "PM" will appear to the left of the hour display, if it is AM nothing will be displayed. 3) Press the "SET" button to confirm the hour setting, and to shift to select the minutes. 5) Press the "SET" button to confirm the time setting, and to advance to manually set the calendar. 6 VI) CALENDAR SETTING Note: When the WWVB signal is found, that date will over-ride the manually set date. 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 5 more times, until the default year "00" flashes in the date LCD. 3) Press the "SET" button to confirm the year, and to set the month. 5) Press the "SET" button to confirm the month, and to set the date. 7) Press the "SET" button to confirm the date, and to set the weekday. 8) The default weekday "MON" (depends on selected language) will flash. 9) Press the "SET" button to confirm the calendar settings, and to advance to select either 12 or 24-hour time display. VII) 12/24-HOUR SETTING 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 9 more times, until the "12" hour time display flashes in the time LCD. 2) Press the "+" button to toggle between 12 and 24 hour time. 3) Press the "SET" button to confirm the 12/24-hour time display, and to advance to select either °F or °C. VIII) SELECTING °F OR °C 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 10 more times, until the default "°F" flashes in the time LCD. 2) Press the "+" button to toggle between °F and °C. 3) Press the "SET" button to confirm the °F or °C selection, and exit the Program Mode. 7 FEATURES & OPERATIONS I) CHANGING DISPLAY MODE (DAY, SECONDS, AND TEMPERATURE) There are three possible display modes to view the day, seconds, and temperature. The month&date/weekday/moon phase/indoor temperature is the default. To change the display: WWVB Tower Alarm sound Indoor Moon Phase Icon Month/Date 1) Press the "+" button. The Weekday display should now show the month&date/weekday/moon phase/seconds. [. . . ] Contact La Crosse Technology for Repairs. TROUBLESHOOTING The LCD is faint. Problem: 1) Move unit to an area with warmer or cooler surrounding Solution: temperature. Problem: 1) It may help reception to face the front of the Moon Phase Solution: Alarm in the general direction of Ft. 3) Be sure the Moon Phase Alarm is at least 6 feet from any electrical devices, i. e. [. . . ]