User manual LA CROSSE TECHNOLOGY WS-9410TWC

[. . . ] 3. TEMPERATURE STATION: Hanging hole LCD display Battery compartment TO RESET THE TEMPERATURE STATION: 1. Remove the batteries from the Temperature Station Wait at least 30 seconds and repeat the procedures in Setting up above BATTERY CHANGE: It is recommended to replace the batteries in all units on an annual basis to ensure optimum accuracy of this unit. Return used batteries to an authorized depot. MIN/MAX key Foldable stand FEATURES: · · · · · · · Indoor temperature display in degree Fahrenheit (°F) Indoor humidity display in RH% Indoor temperature and humidity display with MIN/MAX recordings Relative humidity level bar Indoor comfort indicator icon Low battery indicator Wall mounting or table standing FUNCTION KEYS: The weather station has 1 key function that is easy to use: MIN/MAX key: · · · Toggle between MIN/MAX indoor temperature Toggle between MIN/MAX indoor humidity data Reset MIN/MAX records by pressing and holding the key for 2 seconds LCD SCREEN The Temperature Station's LCD is divided into 3 sections, displaying humidity level in a bar graph format, indoor humidity and indoor temperature. Humidity level bar graph SETTING UP: Please follow these steps to ensure that your new temperature station works correctly: 1. [. . . ] The indoor temperature is automatically displayed once the batteries are inserted. POSITIONING THE TEMPERATURE STATION: The Temperature Station comes complete with a foldable stand that gives the option of table standing or wall mounting. Fix a screw into the desired wall, leaving the head extended out by about 5mm. Using the Temperature Station's hanging hole, carefully hang it onto the screw. Note: Always ensures that the unit locks onto the screw head before releasing. MINIMUM AND MAXIMUM INDOOR TEMPERATURE AND HUMIDITY RECORDINGS: By pressing the "MIN/MAX" key the current indoor temperature will alternate between the maximum and minimum records. Once a new indoor temperature and humidity high or low is reached, it will automatically set into the Temperature Station's memory. MAX icon Indoor temperature display in ºC Relative humidity level bar Indoor humidity display in RH% MIN icon To table stand: Unfold the Temperature Station's stand located at the back of the unit MAX icon MIN icon CARE AND MAINTENANCE: · · · · · · Avoid placing the unit in areas prone to vibration and shock as these may cause damage. Avoid areas where the unit can be exposed to sudden changes in temperature, i. e. direct sunlight, extreme cold and wet/moist conditions as these will lead to rapid changes in temperature which reduces the accuracy of readings. Immediately remove all low powered batteries to avoid leakage and damage. Please return it to the original point of purchase for repair by a qualified engineer. Opening and tampering with the unit may invalidate its guarantee. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. If necessary repairs are not covered by this warranty, or if a product is examined which is not in need or repair, you will be charged for the repairs or examination. The owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service center. La Crosse Technology, Ltd will pay ground return shipping charges to the owner of the product to a USA address only. Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the following specified exceptions: (1) damage caused by accident, unreasonable use or neglect (including the lack of reasonable and necessary maintenance); (2) damage occurring during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of, any accessory or decorative surface; (4) damage resulting from failure to follow instructions contained in your owner's manual; (5) damage resulting from the performance of repairs or alterations by someone other than an authorized La Crosse Technology, Ltd authorized service center; (6) units used for other than home use (7) applications and uses that this product was not intended or (8) the products inability to receive a signal due to any source of interference. . This warranty covers only actual defects within the product itself, and does not cover the cost of installation or removal from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the seller or performance variations resulting from installationrelated circumstances. LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. [. . . ] The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd's authorized service center. La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or duplicated or processed using electronic, mechanical or chemical procedures without written permission of the publisher. [. . . ]