Detailed instructions for use are in the User's Guide.
[. . . ] 1 Connecting a PC Before operation, please verify the player is powered off with one end of the USB cable came with the system inserted into PC and another end into the MP3 player. 2 Downloading MP3 music Connect MP3 player to the USB port of a PC Download MP3 music to MP3 player. Button to power the player on and enter the MP3 Notice: If not all the downloaded files can be played, please verify there are not more than 500 files on the MP3 player. [. . . ] The "Stop Hardware Device" window appears on the screen as shown in the picture below. After the "Safe to Remove Hardware" window appears, the player can be safely disconnected from the PC. Notice: Never unplug the USB cable when transmitting data with PC to avoid damaging the Player. After data transmitting, please do not disconnect the player from your PC until "Device can now safely be removed" appears. In case of application lost or I/O error and power on issues caused by improper operations, please refer to the FAQ. 2 Power on/off From power off mode, press the Press the enter power off mode. Button 3 seconds in any mode and the player will save the data and Notice: If the player is powered off while in standby mode or while playing, all the settings will be lost!3 Main menu setup From standby or playing mode, you can press the MENU button to enter the main menu. Push the or button to select: Play music, Voice, Setting, Intro, About, Folder and Exit; you can press the MENU button to enter the desired submenu. 2 Setting Play mode Push the or button to select the playing mode, including: Normal, repeat one, repeat all and shuffle repeat. 7 Language Setup Push the or button to select from the following languages:German, English, French, Spanish, Poland, Danish, Portuguese, Italian, Dutch, Finnish, and Swedish. 4 Intro From MP3 mode or voice standby mode, you can press the MENU button to enter the main menu, and push the or button to select the intro function, and then button to exit. During intro, it will play the initial 10 seconds of each music file and then skip to the next file. 5 About From MP3 mode or voice standby mode, you can press the MENU button to enter the main menu, and push the available. Button to select the about function, and then Press the MENU button to view the total memory capacity and the memory currently 6 Folder function From or voice standby mode, you can press the MENU button to enter the main menu, and push the or button to select the folder function, and then press the or to MENU button to confirm. You can push and hold the MENU button to browse the file, and push the select the desired one. Note: You can not view the record folder and recorded files while in play music mode, this is only possible in play voice mode. A-B Play Mode From MP3 or voice mode: 1) Press the A-B/REC button to select starting point A; 2) Press the A-B/REC button to select end point B, then it will repeat between A-B. [. . . ] 3) Press the A-B/REC button again to cancel setting and resume playing MP3 or voice. Lock function From MP3 and voice standby/ play/ pause/ record mode, you can push the HOLD switch in the direction of the arrow to lock all the other buttons. If you want to unlock the buttons, please push the HOLD switch in the opposite direction of the arrow. [. . . ]