User manual LENOVO THINKPAD TABLET 2 (N3S25FR)

[. . . ] User Guide ThinkPad Tablet 2 Notes: Before using this information and the product it supports, be sure to read the following: • Safety, Warranty, and Setup Guide • Regulatory Notice • “Important safety and handling information” on page iii • Appendix C “Notices” on page 65 The Safety, Warranty, and Setup Guide and the Regulatory Notice have been uploaded to the Web site. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. Using the touch keyboard and handwriting panel Using the Tablet Digitizer Pen . Determining which mobile network you are using Connecting to a mobile data network . [. . . ] Align the dock connector on the tablet with the connector on the dock. Sitting your tablet on the dock After the tablet is connected to the dock, you can: • Use your tablet in an upright position without having to hold the tablet. € Use the dock to hold your tablet upright when using an external USB keyboard. € Connect the dock to your personal computer with the supplied USB cable to transfer files. € Connect the dock to a stereo system or speakers using a stereo audio cable to play music. € Connect the dock to an electrical outlet using the 65 W ac power adapter shipped with the dock to charge the tablet battery. Security This chapter provides information about how to protect the information stored on your tablet. Using passwords By using passwords, you can help prevent your tablet from being used by others. Once you set a password, a prompt is displayed on the screen each time you turn on the tablet. Passwords and sleep mode If you have set a Windows password and you put your tablet into sleep mode, you will be prompted to enter the password when resuming operation. If you use your email address as a user account to sign in to Windows, enter your email password when resuming operation. Supervisor password If you have set a supervisor password in the ThinkPad Setup program, you are prompt to enter a supervisor password when you start the ThinkPad Setup program. The supervisor password protects the system information stored in the ThinkPad Setup program. Note: The system administrator can set the same supervisor password on many ThinkPad notebook tablets to make administration easier. When the logo screen is displayed, press the power button and the volume up button together. Depending on your needs, do one of the following: • To set a password, do the following: a. Choose your supervisor password and type it in the Enter New Password field. In the Enter Current Password field, type the current supervisor password. In the Enter New Password field, type the new supervisor password; then retype the password you just entered to verify it in the Confirm New Password field. In the Enter Current Password field, type the current supervisor password. Attention: You might want to note down your password and keep it in a safe place. If you forget your supervisor password, Lenovo cannot reset your password. [. . . ] Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right might be used instead. However, it is the user's responsibility to evaluate and verify the operation of any other product, program, or service. Lenovo might have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. [. . . ]