Detailed instructions for use are in the User's Guide.
[. . . ] (1) Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production. (2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
3. Origin Notification
LGEAK : LGEAZ : Printed in Kazakhstan Printed in Brazil Printed in Egypt Printed in India Printed in Indonesia Printed in Algeria LGEKR : LGEMA : LGEMX : LGEND : LGERA : Printed in Korea Printed in Poland Printed in Mexico Printed in China Printed in Russia LGERS : LGESY : LGETH : LGEVN : LGEWR : Printed in Mexico Printed in China Printed in Thailand Printed in Vietnam Printed in Poland
LGEEG : LGEIL LGEIN : :
LGEAS :
4. Changes
10
9
8
7 6
5
4
3
2 Mar/19/2014 Danbi. Park EKLE301618 Manual Drawing Update
1
Rev. [. . . ] Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc. , which can damage the product and its panel. Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage). As yy long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH. When unplugging the cable, grab the plug and unplug it, by pulling at the yy plug. Don’t pull at the cord to unplug the power cord from the power board, as this could be hazardous. Then, yy unplug the power cables, antenna cables and all connecting cables. The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.
8
SAFETY INSTRUCTIONS
When moving or unpacking the product, work in pairs because the product yy is heavy. Contact the service centre once a year to clean the internal parts of the yy product. Servicing is required when yy the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. If yy the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product.
ENGLISH
The panel is a high technology display product with resolution of two million yy to six million pixels. yy When transporting the TV by hand, hold the TV as shown in the following illustration.
ENGLISH
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen. yy It is recommended to move the TV in the box or packing material that the TV originally came in. yy Before moving or lifting the TV, disconnect the power cord and all cables. yy When holding the TV, the screen should face away from you to avoid damage.
yy When transporting the TV, do not expose the TV to jolts or excessive vibration. yy When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. yy Do not apply excessive pressure to cause flexing /bending of frame chassis as it may damage screen.
CAUTION
yy When handling the TV, be careful not to damage the protruding joystick button.
yy Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.
16
ASSEMBLING AND PREPARING
Setting up the TV
Image shown may differ from your TV.
28LB49**-ZH
ENGLISH
1
Attaching the stand
22LB49**-ZH
1
2
B stand base
A stand base
B stand base
A stand base
2
2EA M4 x L10
ASSEMBLING AND PREPARING
17
LB49**-ZB/ZG
LB57**, LB58**-ZA/ZB/ZG/ZJ, LB61** ENGLISH
1
1
A stand base B stand base
1
2
Stand Base
2
2
M4 x L14 M4 x L20 (Only 32LB57**, 32LB58**-ZA/ZB/ ZG/ZJ)
4EA
18
ASSEMBLING AND PREPARING
32/39LB58**-ZM ENGLISH
1
3
1
4EA M4 x L20 2EA M4 x L20
42/47/50/55/60LB58**-ZM Stand Body
1
Stand Base
2
1
4EA M4 x L20
Stand Body
Stand Base
ASSEMBLING AND PREPARING
19
2
CAUTION
yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
ENGLISH
NOTE
yy The Rubber will protect the opening from accumulating dust and dirt. (Only LB58**-ZM)
3
Rubber
4EA M4 x L14
20
ASSEMBLING AND PREPARING
Mounting on a table
1 Lift and tilt the TV into its upright position on a table. -- eave a 10 cm (minimum) space from L the wall for proper ventilation.
Securing the TV to a wall (This feature is not available for all models. )
ENGLISH
10 cm
10 cm
m 10 c 10 cm
10 cm
1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. -- If there are bolts inserted at the eyebolts position, remove the bolts first. Match the location of the wall bracket and the eye-bolts on the rear of the TV. [. . . ] PAGE INFO
P A G E
0
FAV GUIDE MUTE
Q. VIEW
Moves to the previous or next screen.
Views the information of the current programme and screen.
SMART Accesses the Smart Home menus. Navigation buttons (up/down/left/right) Scrolls through menus or options.
INFO
SMART
MY APPS
OK
Selects menus or options and confirms your input. BACK Returns to the previous level.
OK
SETTINGS Accesses the main menus. : Red, : Green, : Yellow, : Blue) 2 TELETEXT BUTTONS These buttons are used for teletext.
BACK
SETTINGS
EXIT
(
1 2
TEXT
LIVE TV
T. OPT
Q. MENU
LIVE TV Returns to LIVE TV. [. . . ]