User manual LG 84LM960V

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LG 84LM960V. We hope that this LG 84LM960V user guide will be useful to you.


LG 84LM960V : Download the complete user guide (45911 Ko)

You may also download the following manuals related to this product:

   LG 84LM960V (60737 ko)
   LG 84LM960V (60737 ko)
   LG 84LM960V (60737 ko)
   LG 84LM960V (60737 ko)
   LG 84LM960V (60737 ko)

Manual abstract: user guide LG 84LM960V

Detailed instructions for use are in the User's Guide.

[. . . ] You can obtain it from most electronics stores. NOTE Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view. Front Rear 8 ASSEMBLING AND PREPARING Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. Model 84LM960V VESA (A x B) 100 x 100 Standard screw M4 Number of screws 4 ENGLISH ENG CAUTION 10 cm 10 cm 10 cm 10 cm Disconnect the power cord first, and then yy move or install the Monitor set. If y y you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury. Use only an authorized LG wall mount yy and contact the local dealer or qualified personnel. [. . . ] yy This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. (Only supported in Analog Mode) ‘AUTO’ Function. yy When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. (Only supported in Analog Mode) CUSTOMIZING SETTINGS 11 CUSTOMIZING SETTINGS ENG ENGLISH 1 Press the desired button on the bottom of the Monitor set. 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 3 Select EXIT to leave the OSD menu. Monitor set Buttons Button Accesses the main menus. (See p. 12) OSD Locked/OSD Unlocked Description This function allows you to lock the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. Use this button to enter MY KEY menu. For more information. (See p. 17) Use this button to enter Picture Mode, SUPER ENERGY SAVING, DUAL DISPLAY, DUAL WEB, MY KEY Setting menus. (See p. 18) When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode) The best display mode 1920 x 1080 You can choose the input signal. •  When two input signals are connected, you can select the input signal (D-SUB/DVI/ HDMI) you want. •  When only one signal is connected, it is automatically detected. Power Indicator The power indicator stays red if the display is running properly (On Mode). If the display is in Sleep Mode, the power indicator blinks red. 12 CUSTOMIZING SETTINGS Customizing Settings ENGLISH ENG Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Set the options by pressing the ◄ or ► or ▼ buttons. 3 Select the "Next Menu" button to enter the more option settings. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. Menu Brightness Contrast Wide/Original ● ● ● Analog Digital ● ● ● ● HDMI ● ● Description To adjust the brightness, contrast of the screen Wide Switch to full screen mode according to input image signal. 5 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. SUPER ENERGY SAVING On Off Reset Description Enables SUPER ENERGY SAVING you can save energy with this energy- efficient function Disables SUPER ENERGY SAVING. Resets the values of total energy consumption reduction and CO2 emission reduction estimates. NOTE TOTAL POWER REDUCTION: How much power is saved while using the monitor. yy SAVING DATA(W/h) yy 600mm (23. 6 inch) SUPER SAVING 6 W/h Saving Data depends on the Panel. So, those values should be different from each panel and panel yy vendor. LG y y calculated these values by using “broadcast video signal” (including broadcast video: IEC 62087) SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING yy function. 20 CUSTOMIZING SETTINGS * Before using below functions, please install DUAL SMART SOLUTION programme. DUAL DISPLAY 1 Press FUNC. OSD. ENGLISH ENG 2 Select DUAL DISPLAY by pressing the ► button. 5 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. DUAL DISPLAY Clone Extended Off Description By selecting Clone, user can use secondary monitor as done mode of primary monitor. By selecting Extended, user can use secondary monitor as extended mode of primary monitor. 5 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( DUAL WEB On Off Description Help user to browse web efficiently by dividing in half. If select Off, DUAL WEB is off. NOTE When monitor goes to power saving mode with pc saving option-> Pressing any button -> OSD yy appear and user should press dual button -> User can bring back to normal mode. CUSTOMIZING SETTINGS 21 MY KEY Setting 1 Press FUNC. OSD. ENG ENGLISH 2 Select MY KEY Setting by pressing the ► button. [. . . ] y y Set the color setting higher than 24 bits (true color) at Control Panel ► Settings. y y Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. The screen blinks. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?Have you installed the display driver? y y Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www. lg. com. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE LG 84LM960V




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LG 84LM960V will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.