User manual LG GBB539PVCPB

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LG GBB539PVCPB. We hope that this LG GBB539PVCPB user guide will be useful to you.


LG GBB539PVCPB : Download the complete user guide (3168 Ko)

You may also download the following manuals related to this product:

   LG GBB539PVCPB (2747 ko)
   LG GBB539PVCPB (974 ko)

Manual abstract: user guide LG GBB539PVCPB

Detailed instructions for use are in the User's Guide.

[. . . ] It can cause electric shock. A1 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. [. . . ] (Do not use chemicals such as benzene, paint thinners or alcohol) Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too much moisture may cause staining. On Repacking Do not throw away the carton and packing materials. When shipping the unit to another location, repack it in its original material. On Disposal The fluorescent lamp used in this product contains a small amount of mercury. Disposal of this product must be carried out in accordance to the regulations of your local authority. A3 Proper posture The proper posture for using the product when seated Adjust the screen so that you can comfortably look at it at a slight downward angle from your natural eye level. Take a break for approximately 10 minutes every hour to reduce any fatigue caused by long-time usage. The stand of the touch monitor allows the product to be used in the optimum position. Adjust the stand angle between 15 to 30 degrees to create the optimum user environment. Your gaze should fall slightly lower than your natural eye level. Stand tilt Range 15° to 30° Adjust the location of the Monitor set to avoid it reflecting light. Maintain your arms horizontal and naturally put your hands on a keyboard A4 Proper posture The proper posture for using the product when standing Adjust the screen so that you can comfortably look at it at a slight downward angle from your natural eye level. Take a break for approximately 10 minutes every hour to reduce any fatigue caused by long-time usage. The stand of the touch monitor allows the product to be used in the optimum position. Adjust the stand angle between 45 to 66(68) degrees to create the optimum user environment. Gaze downward toward the center of the monitor. Stand tilt Range 45° to 66°(68°) Adjust the location of the Monitor set to avoid it reflecting light. Always maintain good posture, with your back upright and legs together. A5 Accessories !!!Thank you for selecting LGE products !!! Please make sure the following items are included with your monitor. When the icon you want becomes highlighted, press the AUTO/SET Button. Push the MENU Button once to return to the main menu to select another function. Push the MENU Button twice to exit from the OSD. A12 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. (D-sub ) NOTE The order of icons may differ depending on the model (A13 to A18 ). A13 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. Main Menu MENU SET : Exit : Adjust (Decrease/Increase) : Enter : Select another sub-menu : Restart to select sub-menu Button Tip Menu Name Icons Sub-menus NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. A14 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PICTURE BRIGHTNESS CONTRAST GAMMA To adjust the brightness of the screen. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display blackish images. MENU : Exit : Decrease : Increase SET : Select another sub-menu COLOR PRESET • sRGB: Set the screen color to fit the sRGB standard color specification. Set your own blue color levels. RED MENU : Exit : Decrease : Increase SET : Select another sub-menu GREEN BLUE A15 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description TRACKING HORIZONTAL VERTICAL To move image left and right. You can save or restore the adjusted value even when using a different environment. To adjust the USER sub-menu function, press the AUTO/SET Button. • ACE (Adaptive Clarity Enhancer): Selects the clarity mode. Not applied Weak clarity and luminosity contrast. Strong clarity and luminosity contrast. • RCM (Real Color Management): Selects the color mode. MENU : Exit : Decrease : Increase AUTO/SET : Select another sub-menu Not applied Green enhance Flesh tone Color Enhance NORMAL This is under normal operating conditions. It’s setting is same with Movie mode and screen is divided by half. A18 Troubleshooting Check the following before calling for service. No image appears G Is the power cord of the • Check and see if the power cord is connected properly to the power outlet. [. . . ] In this case, please ask to the computer or the video card manufacturer. A20 Troubleshooting Display image is incorrect G The screen color is mono or abnormal. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Set the color setting higher than 24 bits (Color Quality) at Control Panel --> Settings. G The screen blinks. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. A21 Specifications Display 43. 27 cm (17. 0 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 43. 27 cm 0. 264 mm x 0. 264 mm (Pixel Pitch) Horizontal Freq. Input Form Signal Input Input Form Max Recommend DDC 2B On Mode Sleep Mode Off Mode : ≤ ≤ 16 W (Typ. ) 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate TTL SOG (Sync On Green) 15 pin D-sub Connector RGB Analog (0. 7 Vp-p/ 75 ohm) VESA 1280 x 1024 @75 Hz VESA 1280 x 1024 @60 Hz Sync Input Video Input Resolution Plug & Play Power Consumption Dimensions &Weight With Stand Without Stand Width 36. 96 cm (14. 55 inch) 36. 96 cm (14. 55 inch) Height 31. 5 cm (12. 40 inch) 31. 5 cm (12. 40 inch) Depth 9. 46 cm (3. 72 inch) 6. 24 cm (2. 46 inch) Net 3. 90 kg ( 8. 60 lb) 15˚ to 66˚ AC 100-240 V~ 50/60 Hz 0. 8 A Operating Conditions Temperature 10 ˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 ˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Attached ( O ), Detached ( Wall-outlet type ) Tilt Range Power Input Environmental Conditions Stand Base Power cord NOTE Information in this document is subject to change without notice. A22 Specifications Display 48. 19 cm (19. 0 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 48. 19 cm 0. 294 mm x 0. 294 mm (Pixel Pitch) Horizontal Freq. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE LG GBB539PVCPB




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LG GBB539PVCPB will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.