User manual LG L9322
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LG L9322. We hope that this LG L9322 user guide will be useful to you.
Manual abstract: user guide LG L9322
Detailed instructions for use are in the User's Guide.
[. . . ] MODEL L9322 Series
1 Safety Information
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. [. . . ] This configuration is to upgrade its firmware by the manufacturer only. It must be always set to ON.
1
2
3
4
5
6
7
8
16
Mounting the camera
Surface mount
Remove the ceiling tile from the ceiling and cut a hole whose diameter is 30~40mm on the ceiling tile to pass the wires and cables through to the upside of the ceiling. (Tapping M4×16)
Connect the wires and cables to the ports and install the main body. (Machine M3×8)
Align the dome cover stud with the dome cover assembly stud and slightly push the dome cover to the ceiling. Turn the dome cover clockwise and remove the protection vinyl from the dome cover.
17
In-ceiling mount
Remove the ceiling tile from the ceiling and cut a hole whose diameter is 113 mm. Cut three holes for M4 screws, and install the main body with the In-Ceiling Plate, the three screws (M4x50) and the three nuts (M4). Then install the ceiling tile to the ceiling and connect the main cable to the main port. Attach the supplied lanyard to the in-ceiling ring eye and then to the building structure.
Align the dome cover stud with the dome cover assembly stud and slightly push the dome cover to the ceiling tile. Then remove the protection vinyl from the dome cover.
18
4 Operation
Menu navigation
We use the LKD1000 controller in this manual to explain the features of the LG Dome camera because of the LKD1000's ability to control all of the LG Dome camera's advanced features. (For detailed controller instructions, refer to the LKD1000 Controller Manual) LKD1000 button Cam OSD button ZOOM IN button ZOOM OUT button FOCUS NEAR button FOCUS FAR button Open/Close(Enter) button Camera OSD operation Displays or removes the setup menu. Executes selections and displays a submenu for an item with the mark.
19
Setup Menu Overview
The following table shows the list of menu items and options. You can adapt the camera to your requirements by setting up the respective items in these menus.
1st level CAMERA SET EXPOSURE 2nd level FOCUS 3rd level FOCUS MODE FOCUS DIST RETURN IRIS AGC WDR/BLC BRIGHTNESS SHUTTER SENS-UP RETURN WHITE BALANCE AUTO MANUAL COLOR TEMP RED BLUE RETURN ONE PUSH ATW DAY/NIGHT AUTO D/N LEVEL DWELL TIME RETURN DAY NIGHT 3D-DNR COLOR OFF/LOW/MIDDLE/HIGH ON OFF SHARPNESS D-EFFECT STABILIZER RETURN 0~68 OFF/V-FLIP/MIRROR/ROTATE OFF/ON LEVEL RETURN -20~20 LOW/MIDDLE/HIGH 5/10/15/30/60 SEC INDOOR/OUTDOOR -100~100 -100~100 AUTO/MANUAL 0~10 OFF/WDR/BLC/HSBLC 0~100 AUTO, OFF, A. FLK, 1/160. . . 1/120000, X512. . . X2 OFF/AUTO X2/AUTO X3. . . /AUTO X128 50cm/1m/3m/5m Contents AUTO/MANUAL/ONE PUSH/ZOOM TRIG
20
1st level PAN/TILT SET
2nd level PRESET
3rd level SET PRESET NAME SPEED DWELL TIME IRIS WDR/BLC/ HSBLC SHUTTER SET POSITION SAVE RETURN GOTO PRESET PRESET TOUR CLEAR PRESET CLEAR ALL FREEZE RETURN OFF/ON 1~9 1~9 1~9 1~4 1~4 1~8 0~127 0~127 ON/OFF
Contents 1/SEC, 10/SEC. . . 360/SEC. . . 500/SEC 1 SEC~255 SEC AUTO/20/40/60/80/100% OFF/LOW WDR/ MID. BLC/ HIGH BLC/HSBLC0. . . /HSBLC5 AUTO, OFF, A. FLK, 1/160. . . 1/120000, X512. . . X2
GROUP TOUR
SET GROUP RUN CLEAR RETURN
PATTERN
RECORD RUN RETURN
AUTO PAN
SET AUTO PAN RUN CLEAR RETURN
SWING
SET SWING(1~8)
POSITION 1 POSITION 2 SPEED DWELL TIME SAVE RETURN
PRESET 0~127 PRESET 0~127 1/SEC, 10/SEC. . . 180/SEC 1~60SEC
RUN CLEAR RETURN
1~8 1~8
21
1st level PAN/TILT SET
2nd level PRIVACY MASK
3rd level MASK NUMBER SET MASK MASK STATE MASK COLOR WIDTH HEIGHT RETURN OFF/ON GRAY/WHITE/BLACK 2~320 3~240 OFF/ON SET/ON/OFF ON 1~8
Contents
SPECIAL
PROPORTIONAL PT COMPASS HOME POSITION
SET POSITION GO DWELL TIME RETURN 0~100 MIN
OFF AUTO RETURN ON OFF TILT LIMIT AUTO FLIP MOTION DET OFF/ON OFF/ON ON SENSITIVITY WIDTH HEIGHT MOVE X MOVE Y RETURN OFF COMMUNICATION PROTOCOL BAUD RATE SAVE & EXIT RETURN RETURN RETURN OSD SET USER TITLE ZOOM MAG FUNCTION ID RETURN LANGUAGE ENG// / OFF/ON OFF/ON OFF/ON OFF/ON LG-Multix/Pelco-D/Pelco-P/Pelco-C 2400/4800/9600/19200/38400 bps 0~100 2~8 2~6 1~7 1~5 RETURN TIME RETURN 1~100 MIN
22
1st level ALARM SET
2nd level ALARM IN (1~3) ON
3rd level NORMAL ALARM IN (1~3) DWELL TIME RETURN OFF
Contents OPEN/CLOSE PRESET 0~127 3~255 SEC
ALARM OUT
ON
ALARM OUT DWELL TIME RETURN
ALARM IN 1~3/MOTION DET 3~255 SEC
OFF RESET INFORMATION PTZ S/W VER CAM S/W VER ID PROTOCOL BAUD RATE INITIALIZATION FACTORY RESET RETURN RETURN
23
Menu settings
Camera menu settings
Focus setting
The camera adjusts the focus automatically by sensing the center of the picture.
Focus mode Select [FOCUS MODE] option on the [FOCUS] menu and then select the following mode. MANUAL: Focus is activated automatically after the zoom movement is finished. If you want to control the focus manually, press the FOCUS (NEAR or FAR) buttons on the controller. If the camera is received auto-focus command, the camera is activated auto-focus mode and the focus is set automatically and then the focus mode is automatically changed to manual mode. If you change the zoom, the focus is activated automatically and then the focus mode is automatically changed to manual mode Focus Distance setting Selects the minimum shooting distance for the focus. Select [FOCUS DIST] option on the [FOCUS] menu and then select a focus distance value
24
Exposure settings
IRIS setting Select the desired lens iris value for camera exposure. AGC (Automatic Gain Control) Setting If the images are too dark, change the maximum [AGC] value to make the images bright. Use [Near] or [Far] button to select a mode.
WDR/BLC setting Use WDR/BLC option to set the options for BLC or WDR camera. Use [Near] or [Far] button to select a mode then press [Open] or [Close]. WDR LEVEL: WDR (Wide dynamic range) feature can be very helpful to cope with very challenging lighting conditions. [. . . ] Use [In], [Out], [Near] or [Far] button to select a character, number, symbol mark or option item.
1
</>: Moves cursor to left or right.
1 (Blank): Insert a space at the cursor position.
CLR: If you enter the wrong code, select [CLR] then press [Open] or [Close]. POS: Move the USER TITLE position on the screen using the [Near] or [Far] buttons. END: Select this option to exit the settings
43
ZOOM MAG Setting
Displays or removes the zoom OSD on the screen.
1. Select [RETURN] option and press [Open] or [Close] button to exit the setting menu
FUNCTION Setting
Displays or removes the Function OSD on the screen.
1. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LG L9322
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LG L9322 will begin.