Detailed instructions for use are in the User's Guide.
[. . . ] Warning: Do not place the projector in excessively warm or humid areas, and avoid direct sunshine. Warning: To avoid electric shock, do not dismantle the projector by yourself if the projector malfunctions for any reason. Warning: Be careful when you move or carry the projector to prevent it from dropping.
2
02-12-17, 16:39
2. The projector
2. 1 Features
Receives signals with resolution up to 1280x1024, 75 Hz. [. . . ] If the LED indicator flashes quickly, the projector is most likely in an abnormal condition. If the fan is in an abnormal condition, the message "Fan lock error occurred, Projector shutting down!" appears on the screen. If the temperature becomes abnormal, the message "Thermal error occurred, Projector shutting down!" appears on the screen. The LED indicator flashes quickly when you start the shutdown process. Standby Please refer to page 8, "Turning on/off the projector". If you do not choose any item after opening the menu, the menu will automatically close after 20 seconds. You can also press this key to select Analog RGB, Analog Y Pb Pr, Digital RGB, Composite Video, S-Video and Component Video signals in sequence. Keys On the menu, press the Enter key and then the right arrow key to increase the setup value; or the left arrow key to reduce the setup value.
14
02-12-17, 16:39
- Remote Control
Key Freeze/Esc/L
Enter/R
Stand By Mode
Functions Press this key to freeze the image. In the remote-control mouse mode, this key works as the left key of the mouse. Please check page 13, "Enter/Sync" of "Control panel", for the use of this key on the menu. In the remote-control mouse mode, this key works as the right key of the mouse. · Be sure to connect the USB mouse cable to the computer and projector before using the remote control as a mouse.
15
02-12-17, 16:39
Menu Source
Blank Auto Pg. Up
Please refer to page 13, "Menu" of "Control panel". Select Analog RGB, Analog Y Pb Pr, Digital RGB, Composite Video, S-Video and Component Video signals in sequence. When the mouse is in use, press this key to turn to the previous page. Press Press (*) In the remote control mode, the function of these keys is the same as the up/down/left/right keys on the panel (*). In the remote-control mouse mode, the function of these keys is the same as the up/down/left/right key of the mouse. to reduce the length of the upper screen.
Pg. Dn
* Press the Auto key to return to previous setup.
16
02-12-17, 16:39
5. You can press the up or down key to select the items on the menu; or press Esc to quit the menu. To enter the submenu, please press the Enter key or the right arrow key. On the submenu, press the Menu or Esc key on the remote control to return to the main menu; or press twice to quit the menu.
5. 1 Image (VGA mode)
Submenu
Brightness
Purpose
To adjust the brightness of image
Using
Press key to decrease brightness. key to reduce Press the length of the upper screen. (*) Press key to lower color temperature; the image looks warmer. Press key to enlarge the image (*)
Contrast
Keystone
To control the balance between the brightest and darkest parts of the image. [. . . ] Make sure that distance between the screen and projector is adequate (4'7" ~ 32'9" or 1. 4 ~ 10 meters). Q. : The colors projected by your projector look different from the colors of your computer or VCR. You can adjust the brightness, color or contrast on the menu to change colors. Q. : When the projector is connected to a DVD player, playing a film with the ratio 16:9, the image is reshaped. [. . . ]