User manual MIELE W1 - WMG 120

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MIELE W1 - WMG 120. We hope that this MIELE W1 - WMG 120 user guide will be useful to you.


MIELE W1 - WMG 120 : Download the complete user guide (2026 Ko)

Manual abstract: user guide MIELE W1 - WMG 120

Detailed instructions for use are in the User's Guide.

[. . . ] Operating instructions for washing machines To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. 60 The following fault messages appear in the display and the programme stops. 68 Opening the door in the event of a blocked drain outlet and/or power failure . 96 5 Caring for the environment Disposal of the packing material The packaging is designed to protect the washing machine from damage during transportation. [. . . ] Do not steam iron garments carrying this symbol as this could cause irreversible damage. ΁ Do not iron Professional cleaning     Dry clean only. ΁€ Use the ,  and OK sensors to change the temperature. Spin speed It is possible to change the spin speed up until the final spin begins. ΁€ Use the ,  and OK sensors to change the spin speed. Options It is possible to select or deselect the Short and Water plus options up to 5 minutes after the programme has started. Tip: It is not possible to make any changes to the programme or to cancel it if the safety lock has been activated. If you want to select a different programme  Close the door. Interrupting a programme  Switch the washing machine off with the  button. ΁€ Switch the washing machine back on with the  button to continue with the same programme. π¦  Scroll up the list with the  or  sensor to: Add laundry  – the water is above a certain level. If you want to open the door when the above conditions are present you will need to cancel the programme. The safety lock will remain activated if the temperature in the drum is above 55 °C. The lock will not deactivate until the temperature has dropped to below 55 °C. If this message does not appear in the display then it is no longer possible to add or remove items of laundry. 48 Changing the programme sequence Safety lock The safety lock prevents the temperature, spin speed or options being altered during a wash programme. The following will appear in the display: Cancel programme To deactivate the safety lock  Proceed as for activating the safety lock. The following will appear in the display: Deactivate lock   Touch the OK sensor. π¦  Scroll up the list with the  or  sensor to: Activate lock   Touch the OK sensor. 49 Detergent The correct detergent All detergents produced for automatic washing machines are suitable. Follow the manufacturer's instructions and dosage recommendations on the packaging. For users in Asia: please use a low foaming detergent suitable for use in front-loading machines Dispensing aids Use dispensing aids, (e. [. . . ] Factory default setting: the reduce temperature setting is switched off. Soak duration You can set a duration for the soak process of between 30 minutes and 5 hours. When the Soak option is selected the laundry will be soaked for the duration selected. 92 Settings Water plus You can increase the set amount of water in the wash programmes. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MIELE W1 - WMG 120




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MIELE W1 - WMG 120 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.