User manual MOTOROLA CP040
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MOTOROLA CP040. We hope that this MOTOROLA CP040 user guide will be useful to you.
Manual abstract: user guide MOTOROLA CP040
Detailed instructions for use are in the User's Guide.
[. . . ] Push-to-talk (PTT) Press and hold down this button to talk; release it to listen. 3
English
RADIO OVERVIEW
On-Off / Volume Knob Used to turn the radio on or off, and to adjust the radioâs volume. LED Indicator RADIO OVERVIEW
The LED shows radio status as follows:
Programmable Buttons
Your radio has two programmable buttons. Your dealer can program these buttons as shortcuts to various radio features. [. . . ] ) Press the battery firmly to the radio and slide the battery upward until the latch snaps into place. Slide the battery latch, located on radio bottom, into the lock position. Disengage by pushing downward and holding the latch towards the front of the radio. With the battery latch disengaged, slide the battery down from the top of the radio approximately 1 cm. Once the battery is free from the battery rails, lift it directly away from the radio. 2
3
3
English
Attaching the Antenna
Removing the Antenna GETTING STARTED
Turn the antenna clockwise to attach it. 9
English
Attaching the Belt Clip GETTING STARTED
1 Align the grooves of the belt clip with those of the battery. Removing the Belt Clip Belt Clip Tab
1
Use a key to press the belt clip tab away from the battery to unlock the belt clip. 2
2
English
10
1
Hold down the Volume Set button; you will hear a continuous tone. If power-up is successful, you will hear the Self-Test Pass Tone ( ) and see the LED flash green. If the radio fails to power up, you will hear the Self Test Fail Tone ( ). OFF
Turn the On/Off/ Volume Control knob counter-clockwise until you hear a click. Note: Due to government regulations, some channels may not be programmed. To select a channel, turn the Channel Selector knob clockwise or counterclockwise until you reach the desired channel. 11
English
GETTING STARTED
TURNING THE RADIO ON OR OFF
ADJUSTING THE VOLUME
SENDING A CALL
1 2 Turn your radio on. Hold the radio in a vertical position, press the PTT, and talk at a distance of about 2. MONITORING
It is important to monitor traffic before transmitting to ensure that you do not âtalk overâ someone who is already transmitting. 1 Press and hold the preprogrammed Monitor button to access channel traffic. Once channel traffic has cleared, proceed with your call by pressing the PTT button. A long press of the preprogrammed Monitor button places the radio in Sticky Permanent Monitor mode. A short press of the Monitor button cancels Sticky Permanent Monitor mode and returns the radio to normal operation. To respond, hold the radio in a vertical position, press the PTT, and talk at a distance of about 2. [. . . ] English
14
SCAN
You can monitor multiple channels and receive any calls that are transmitted on them. Your radio automatically switches to a scan list channel when it detects activity on it. TALKBACK
If the Talkback option is preprogrammed, you can respond to any calls received during the scan operation. To respond, press the PTT button before the programmed hangtime elapses. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MOTOROLA CP040
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MOTOROLA CP040 will begin.