User manual NAD C375BEE

[. . . ] ® Owner's Manual Stereo Integrated Amplifier C 375BEE SVENSKA NEDERLANDS DEUTSCH ITALIANO ESPAÑOL FRANÇAIS ENGLISH IMPORTANT SAFETY INSTRUCTIONS ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA Save theSe inStructionS for later uSe. 1 read instructions - All the safety and operating instructions should be read before the product is operated. 2 retain instructions - The safety and operating instructions should be retained for future reference. 3 heed warnings - All warnings on the product and in the operating instructions should be adhered to. [. . . ] 12 balance: The BALANCE control adjusts the relative levels of the left and right speakers. The 12 o'clock position provides equal level to the left and right channels. The BALANCE control does not affect recordings made using the Tape outputs but will affect the signal going to the Pre-amp output (PRE OUT 1 and PRE OUT 2). 13 volume: The VOLUME control adjusts the overall loudness of the signals being fed to the loudspeakers or headphones. Turn clockwise to increase the volume setting; counter clockwise to lower it. The VOLUME control does not affect recordings made using the Tape outputs but will affect the signal going to the Pre-amp output (PRE OUT 1 and PRE OUT 2). SVENSKA NEDERLANDS DEUTSCH ITALIANO ESPAÑOL FRANÇAIS ENGLISH IDENTIFICATION OF CONTROLS rear panel ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 24 25 ATTENTION! PleasemakesurethattheC375BEEispoweredofforunpluggedbeforemakinganyconnections. Itisalsoadvisabletopower-downorunplugall associatedcomponentswhilemakingorbreakinganysignalorACpowerconnections. 1 mp input: Input for a Media Player or other line-level signal source. Use a twin RCA-to-RCA lead to connect the Media Player's left and right "Audio Outputs" to this input. NOTE IfanexternalMediaPlayerisconnectedtothefrontMPsocket(usinga 3. 5mmstereoplug)whilelisteningtoaMPline-levelsource, theexternal MediaPlayerwillbedirectlyselectedwiththeMPline-levelsource immediatelydisconnected. Use a twin RCA-to-RCA lead to connect the CD player's left and right "Audio Outputs" to this input. Use a twin RCA-to-RCA lead to connect the tuner left and right "Audio Outputs" to this input. 4 diSc input: Input for additional line level input signals such as CD, Mini Disc player or the output signal from a step-up amplifier for a turntable. Use a twin RCA-to-RCA lead to connect the auxiliary unit's left and right "Audio Outputs" to this input. NOTE WiththeoptionalPP375PHONOMODULEinstalled, theDISCinput socketisdisabledandthePHONOsourceselectedastheactiveinput. 5 aux input: Input for additional line level input signals such as another CD player. Use a twin RCA-to-RCA lead to connect the auxiliary unit's left and right "Audio Outputs" to this input. 6 tape 2 in/out: Connections for analog recording and playback to an audio tape recorder of any type. Using twin RCA-to-RCA leads, connect to the left and right "Audio Output" of the tape machine to the TAPE 2 IN sockets for playback. Connect the left and right "Audio Input" of the tape machine to the TAPE 2 OUT sockets for recording. 7 tape monitor in/out: Connections for analog recording and playback to a secondary audio tape recorder of any type. Using twin RCA-to-RCA leads, connect to the left and right "Audio Output" of the tape machine to the TAPE MONITOR IN sockets for playback and tape monitoring. [. . . ] folder/file [ ]: Select through folder list/Select through WMA/MP3 files. Src: Toggle to select desired SRC mode. tuner control (for use with nad am/fm/dab tuner): Set the DEVICE SELECTOR to "TUN" in order to gain access to these buttons. Refer to the corresponding labels printed in the remote control faceplate and their respective assigned buttons to make use of these functions. Some of the control buttons below are applicable only to specific NAD Receiver or Tuner models; check the owner's manual of your NAD Receiver or Tuner for control button compatibility. [. . . ]