User manual NIKON COOLPIX 4800

[. . . ] En The Nikon Guide to Digital Photography with the DIGITAL CAMERA Trademark Information Apple, the Apple logo, Macintosh, Mac OS, and QuickTime are registered trademarks of Apple Computer, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trade names mentioned in this manual or the other documentation provided with your Nikon product are trademarks or registered trademarks of their respective holders. For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them. [. . . ] 50 More on Playback Voice Memos: Recording and Playback A voice memo can be recorded and appended to any 08 01 2004 picture marked with a (voice memo recording 10 00 guide) icon in full-frame playback ( 21, 48). If a voice memo already exists for the current picture, it must be deleted before a new memo can be recorded. Voice memos can not be recorded for movies or during thumbnail playback ( 48) or playback zoom ( 22, 49). To Press Description 100NIKON 100 0001 Record voice memo If icon is displayed on current picture, memo will be recorded while shutter-release button is held down. ReShutter During recording, button cording ends after about 20 s or when shutter-release button is released. Pictures for which voice memo exists are marked by (voice memo playback guide) and icons. button Playback ends when voice memo ends or shutter-release button is pressed again. to Play voice memo Change volume Delete picture or voice memo Confirmation dialog will be displayed. Press multi selector up or down to highlight option, press center to select. voice memo · Select to delete voice memo only No · Select No to exit without deleting picture or voice memo Yes More on Playback Voice Memos Voice memo file names have the same identifier and four-digit file number as the associated picture, followed by the extension ". WAV" (e. g. , "DSCN0015. WAV"). 51 Viewing Pictures on TV The EG-CP14 audio / video (A / V) cable included with the camera can be used to connect the camera to a television or video-cassette recorder (VCR). Choosing a Video Mode The Video mode item in the setup menu offers a choice of NTSC and PAL ( 99). Be sure that the mode selected matches the standard used in the video device. 1 2 Turn the camera off Turn the camera off before connecting or disconnecting the A / V cable. Connect the A / V cable Open the interface connector cover as shown at right and insert the black plug into the camera's interface connector. Insert the yellow plug into the video-in jack on the television or VCR. Connect the white plug to the audio-in jack. 3 4 Tune the television to the video channel If in doubt, consult the documentation for your television or VCR. Turn the camera on Press the button for about a second to turn the camera on. The camera monitor will remain off and the television will show the image normally shown in the monitor. More on Playback PAL If PAL is selected for Video mode and the camera connected to a video device, video output will be suspended and the camera monitor or electronic viewfinder will turn on when the camera is in movie mode. 52 Viewing Pictures on a Computer Using the UC-E6 USB cable and PictureProject software provided with your camera, you can view your photographs and movies on a computer. Before you can transfer (copy) pictures to your computer, you will need to install PictureProject. For more information on installing PictureProject and transferring pictures to your computer, see the PictureProject Reference Manual (on CD) and the Quick Start Guide. Before Connecting the Camera Pictures can be copied from the camera to the computer by: · Pressing the center of the multi selector ( button) · Clicking the Transfer button in PictureProject Which method you will use depends on your computer's operating system and the USB option selected in the camera setup menu. After consulting the following table, select the appropriate option using the USB Center of multi selector ( button) item in the camera setup menu. The default option is Mass Storage. Pictures transferred using: Operating system Windows XP Home Edition Windows XP Professional Windows 2000 Professional Windows Millennium Edition (Me) Windows 98 Second Edition (SE) Mac OS X 10. 1. 5 or later Camera multi selector ( button) PictureProject Transfer button Choose Mass Storage or PTP. Choose Mass Storage. [. . . ] 15 · AC adapter (available separately) is not properly con9 Monitor is blank nected. 104 button until indicators No indicators appear · Indicators are hidden. in monitor 6 · Ambient lighting is too bright: use electronic viewfinder. 103 Problem Technical Notes 108 Solution · Camera is in playback mode. [. . . ]