User manual NIKON LITE TOUCH ZOOM 110S BROCHURE

[. . . ] If desired, a removable Secure Digital (SD) memory card can be used for additional storage. Internal memory is used for recording, deletion, and transfer only if no memory card is inserted. To insert a memory card: 1 Turn the camera off and confirm that the power-on lamp and the monitor are off. 2 Open the memory card slot cover and slide the memory card in until it clicks into place. [. . . ] Move the highlight down. In the descriptions that follow, how to use the multi selector to perform a task are shown in gray. 4. 1 4. 2 Date Set time and date? No Yes Choose the desired language and press k. Choose [Yes] and press k. If daylight saving time is in effect, press the multi selector down to highlight [Daylight saving] and press k to select. Press the multi selector up to return to Step 4. 3. 4. 3 Time zone London, Casablanca Daylight saving Press k. The home time zone menu is displayed. 6 First Steps 4. 4 Home time zone 4. 5 Date D M Y 01 London, Casablanca Back 09 00 00 2007 Select your home time zone and press k. Press left to move the cursor forward. 4. 6 Date D M Y 4. 7 11 2007 10 Press this button in shooting mode for shooting-mode selection menu. 15 15 Choose the order in which the day, month, and year are displayed and press k. The camera enters shooting mode. When daylight saving time ends, turn [Daylight saving] off from the date menu in the setup menu. Page 80 of the User's Manual. First Steps 7 Taking Pictures Step 1 Check Indicators in the Monitor Check the battery level and number of exposures remaining. Shooting mode U is displayed in easy auto mode. To select other shooting modes, press shooting mode button (A 14). Internal memory indicator Pictures will be recorded to internal memory (approximately 23 MB). When a memory card is inserted, C is not displayed and pictures will be recorded to memory card. 13 Number of exposures remaining Battery level indicator NO INDICATOR B N Warning!Batteries low; prepare to replace batteries. Image mode Display image size and quality set in the image mode menu. Page 66 of the User's Manual 8 Taking Pictures Step 2 Ready the Camera Hold the camera steadily in both hands, keeping your fingers and other objects away from the lens, flash, and built-in microphone. Page 40 of the User's Manual A Auto mode White balance, continuous shooting and color options in the shooting menu can be set for shooting. Page 31 of the User's Manual Using Camera Menus A variety of shooting and playback settings can be adjusted from the camera menus. Press d to display the menu for the current mode and use the multi selector (A 6) to select an option. If M is displayed at the lower right in the monitor, help for the current menu item can be viewed by pressing g (j). Page 10 of the User's Manual Easy auto mode Image mode Set up Exit 14 Other Functions Shooting in the Scene Mode Select the scene mode in the shooting-mode selection menu. Press d in the scene mode to display the scene menu and select a mode optimized for the selected subject type. The following are brief descriptions of each scene mode. Scene b Portrait c Landscape d Sports e Night portrait f Party/indoor g Beach/snow h Sunset i Dusk/dawn j Night landscape k Close up l Museum m Fireworks show n Copy o Backlight p Panorama assist For clear portrait shots. For panoramas. Scene Description Page 32 of the User's Manual Other Functions 15 Installing Nikon Transfer Nikon Transfer can be used to copy (transfer) pictures to a computer for storage. For further information, refer to the help information contained in the Software Suite CD or in Nikon Transfer. Before You Begin: Nikon Transfer System Requirements Confirm that your system meets the following requirements: Windows Intel Celeron, Pentium 4, or Core series processor with a clock speed of 1 GHz or faster recommended Macintosh PowerPC G4 or G5 model or Intel Core or Xeon (Universal Binary) model with built-in USB port required CPU OS1 Preinstall version of Windows Vista (32-bit Home Basic/Home Premium/Business/ Enterprise/Ultimate editions), Windows XP Service Pack 2 (Home Edition/Professional), Windows 2000 Professional2 Service Pack 4 Mac OS X (version 10. 3. 9, 10. 4. 9) Hard disk space 60 MB required for installation; 1 GB required when Nikon Transfer is running Windows Vista: 512 MB or more with a minimum of 128 MB free Windows XP, Windows 2000 Professional: 256 MB or more with a minimum of 128 MB free 800 × 600 pixels or more (1, 024 × 768 pixels or more recommended) with 16-bit color or more Only computers with built-in USB ports supported RAM Video resolution Miscellaneous 1 2 Refer to the Nikon website for the latest information on operating system compatibility. If your computer is running Windows 2000 Professional, the LITE TOUCH ZOOM 110S cannot be connected to the computer. After taking the time to read and understand the contents of this agreement, click [Accept] and follow the on-screen instructions to complete the installation. [. . . ] Connect the camera to the computer using the supplied USB cable. Check to be sure that the connector is in the correct orientation and insert the plug straight. Do not insert or disconnect it forcibly. 3 Turn on the camera. Windows Vista/XP When the AutoPlay dialog is displayed, select [Copy pictures to a folder on my computer using Nikon Transfer] (Windows Vista) or [Nikon Transfer Copy pictures to a folder on my computer] (Windows XP), and click [OK] (Windows XP only). To bypass this dialog in the future, check [Always do this for this device:] (Windows Vista), or [Always use this program for this action. ] (Windows XP). Mac OS X Nikon Transfer will start automatically if [Yes] was selected in the Auto-Launch setting dialog when Nikon Transfer was first installed. Transferring Pictures to a Computer 21 4 Confirm that the source device is displayed in the transfer options [Source] panel and click [Start Transfer]. At the Nikon Transfer default setting, all pictures are transferred to the computer. [. . . ]