User manual NIKON COOLPIX S80

[. . . ] DIGITAL CAMERA User's Manual En Trademark Information · Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. · Macintosh, Mac OS, and QuickTime are trademarks of Apple Inc. · Adobe and Acrobat are registered trademarks of Adobe Systems Inc. · HDMI, logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. [. . . ] When the shutter is released, the camera detects one or more human faces (up to three), and processes the image to soften facial skin tones before saving the picture. The degree of skin softening applied can be selected from High, Normal (default setting), and Low. · The effects of skin softening are not visible when framing pictures for shooting. Check the degree of skin softening performed in playback mode. 74 Shooting Smiling Faces (Smart Portrait Mode) 4 y Blink proof When On is selected, the camera automatically releases the shutter twice each time a picture is taken. Of the two shots, one in which the subject's eyes are open is saved. · If the camera saved a picture in which the subject's eyes may have been closed, the dialog shown at right is displayed for a few seconds. 5 a Smile timer More on Shooting A blink was detected in the picture just taken. · On (default setting): The camera uses face detection to detect a human face, and then automatically releases the shutter whenever a smile is detected. · Off: The camera does not release the shutter automatically with smile detection. 6 o Exposure compensation Adjust Exposure compensation (A 47) with shooting in smart portrait mode. C Settings in Smart Portrait Mode There are functions with which this setting cannot be enabled. See "Camera Settings That cannot be Applied Simultaneously" (A 76) for more information. 75 Camera Settings That cannot be Applied Simultaneously Some shooting settings cannot be used with other functions. Restricted function Setting Continuous (A 58) Blink proof (A 75) Self-timer (A 36) Subject tracking (A 55) Continuous (A 58) More on Shooting Description When Continuous, BSS, or Multi-shot 16 is selected, flash is disabled. When Touch shooting is set to Subject tracking, Self-timer is disabled. When Multi-shot 16 is selected, the Image mode setting is fixed at L (image size: 2560×1920 pixels). When 3200 or 6400 is selected for ISO sensitivity, the Image mode setting of only M 2048×1536, N 1024×768, or O 640×480 can be selected. If any image mode setting other than above is selected, the image mode setting is automatically changed to M 2048×1536 when ISO sensitivity is set to 3200 or 6400. When Touch shooting is set to Subject tracking, Macro mode is disabled. When Multi-shot 16 is selected, the ISO sensitivity setting is automatically specified according to the brightness. When taking a picture using the self-timer, the continuous setting is fixed to Single. When using the touch shutter function, one picture is taken each time the monitor is tapped. When taking a picture using Continuous, BSS, or Multi-shot 16, Blink warning is disabled. When Continuous or BSS is selected for the Continuous setting, date imprint is disabled. When On is selected, Date imprint is disabled. Flash mode (A 33) Image mode (A 38) ISO sensitivity (A 57) Macro mode (A 54) ISO sensitivity (A 57) Subject tracking (A 55) Continuous (A 58) Self-timer (A 36) Continuous (A 58) Touch shutter (A 41) Continuous (A 58) Continuous (A 58) Blink proof (A 75) Blink warning (A 159) Date imprint (A 152) 76 Camera Settings That cannot be Applied Simultaneously Restricted function Digital zoom (A 27) Setting Continuous (A 58) Subject tracking (A 55) Description When Multi-shot 16 is selected, digital zoom is not available. When the touch shooting is set to Subject tracking, digital zoom is disabled. More on Shooting C Restricted Functions in Shooting Mode The restricted functions vary with the shooting mode (A 48). [. . . ] · Remove the memory card to print pictures from the internal memory. Paper size cannot be selected from the camera in the following situations, even when printing from a PictBridge-compatible printer: · The printer does not support the paper sizes specified by the camera. · The printer automatically selects the paper size. 159 22 Cannot select paper size with camera. 141, 142 Edge of printed picture is cropped. 138 · When printing pictures taken at an Image mode setting of p 3968×2232 (default setting), the edges of pictures may be cropped, preventing printing of complete pictures. Refer to the documentation supplied with the printer or consult the digital photo lab for further details to make sure that the printer supports printing at an aspect ratio of 16:9. [. . . ]