User manual OMRON Z510

[. . . ] Welding Bead Sensor Z510 In-line Inspection of Welding Beads · Inspect for welding flaws by measuring the bead shape. · The high-speed 10-ms measurement period allows 100% in-line inspection. [. . . ] Resolution (See note. ): 0. 25 mV (± 5 V) 0. 4 µA (4 to 20 mA) Approx. 700 g (Controller only) Note: This resolution is for measurements with an OMRON K3AS Linear Sensor Controller connected and values averaged over 64 measurements. B-54 Displacement sensors / Width-measuring Sensors Sensors: Z510-SW2T, Z510-SW6, and Z510-SW17 Sensor model Z510-SW2T Mirror reflection Diffuse reflection Diffuse reflection Z510-SW6 Z510-SW17 Mirror reflection Diffuse Mirror reflection reflection Measurement mode Measurement distance at center beam cover mounted) 20 mm (16 mm with 5. 2 mm 50 mm 44 mm 100 mm 94 mm ±16 mm Light source Beam dimensions (See note 1. ) Linearity Resolution Sampling period LED indicator (Laser indicator) Temperature characteristic (See note 9. ) Degree of protection Ambient operating illumination EnvironmenAmbient temperatal resistance ture 30 µm × 24 mm typical at the ref- 60 µm × 45 mm typical at the reference distance erence distance (6-mm measurement region) (17-mm measurement region) ±0. 1% F. S. (See note 4. ) 0. 3 µm (See notes 7 and 8. ) 1 µm (See notes 7 and 8. ) IP64 IP66 Illumination at light-receiver surface: 3, 000 lx max. (incandescent light) Operating: 0 to 50° C (with no icing or condensation) Storage: -15 to 60° C (with no icing or condensation) Ambient humidity Operating and storage: 35% to 85% (with no condensation) Vibration (de10 to 150 Hz (double amplitude of 0. 35 mm) for 8 minutes each in the X, Y, and Z directions struction) Controller: Die-cast aluminum Materials Cable sheathing: Heat-resistant PVC Connector: Zinc alloy and brass Cable length 0. 5 m Minimum bending radius 68 mm Weight Approx. The minimum light intensity at the edges of the beam is defined as 1/e2 (13. 5%) of the intensity at the center of the beam. Some light will scatter beyond this beam region and the measurement may be affected if the immediate vicinity around the workpiece is highly reflective. This is the error with respect to the theoretical line of the displacement output when measuring the standard OMRON quartz glass. This is the error with respect to the theoretical line of the displacement output when measuring a standard OMRON stainless-steel block. This is the error with respect to the theoretical line of the displacement output when mea- Z510-SW17 suring the standard OMRON white alumina ceramic. This is the displacement output's peak-to-peak displacement conversion value. These figures are for measurement of the standard OMRON quartz glass (mirror reflection) or stan- 80 mm ±0. 1% max. dard OMRON stainless-steel block (diffuse reflection) at the center of the measurement 80 mm region. The resolution performance characteristics may not be met when operating in a 120 mm Distance magnetic field. These figures are for Sensors connected to a Z510-WC10E or Z510-WC15E and averaged over 16 measurements. [. . . ] 0. 01% F. S. /° C ±5 mm ±4 mm ±20 mm Visible semiconductor laser (Wavelength: 658 nm, 15 mW max. , class 3B) ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. Q03E-EN-02 In the interest of product improvement, specifications are subject to change without notice. B-56 Displacement sensors / Width-measuring Sensors [. . . ]