User manual ORION TELESCOPES & BINOCULARS SKYWIZARD INSTALL

[. . . ] Sky Wizard Installation Kit for Great Polaris Mounts #2395 The Sky Wizard Installation Kit for Great Polaris Mounts is necessary for usage of the Sky Wizard Model 1, 2, or 3 or the Sky Wizard CTI on GP or GP-DX mounts. [. . . ] When not in use, the cable can be disconnected from the encoders and the Sky Wizard computer for storage. Encoder Ratios To initialize the Sky Wizard for the GP mount encoders, you must enter the INSTALL mode and input some settings. Use the UP and DOWN keys to scroll until INSTALL appears, and press the ENTER button. Scroll with the UP and DOWN keys until SCOPE GQ appears on the Sky Wizard's LED display, then press ENTER. When the word SCROLL appears, you can input any number from 0 to 9; this determines how fast information will scroll across the Sky Wizard's LED screen. Use the UP and DOWN keys to select a number, then press ENTER. Now, if you have Sky Wizard Model 1, input +03000 for the R encoder and then +03000 for the D encoder when prompted to do so. If you have Sky Wizard Model 2, input +0. 6827 for the 1 encoder and +0. 6827 for the 2 encoder when prompted to do so. You can choose either SA or UA; if you choose SA, the Sky Wizard will give the Sky Atlas 2000. 0 chart number for the object selected in the CATALOG mode, and if you choose UA, the Uranometria chart number will be displayed. [. . . ] Refer to the manual that comes with the Sky Wizard computer for detailed instructions on its use. Customer Support (800) 676-1343 E-mail: support@telescope. com Corporate Offices (831) 763-7000 Providing Exceptional Consumer Optical Products Since 1975 P. O. [. . . ]