User manual PALSONIC DVD2000

[. . . ] Operating Instructions DIGITAL VIDEO DISC PLAYER MODEL: DVD - 2000 Type Tested Electrical Safety AS/NZS 3250 Lic 4168 Standards Australia APP No: CS7554N PALSONIC CORPORATION PTY LTD 1 JOYNTON AVE WATERLOO NSW 2017 AUSTRALIA TEL:(02)93137111 FAX:(02)93137555 PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 DVD/VIDEO CD/AUDIO CD PLAYER DIGITAL AUDIO Dear Customers May we take this opportunity to thank you for purchasing this DVD/VIDEO CD/CD player. We strongly recommend that you carefully study the Operating instructions before attempting to operate the unit and that you note the listed precautions. Precautions Please read these precautions before operating this unit. l Power cord protection Safety information l Note: This unit can be used only where the power supply is AC 110240V, 50/60 Hz. It cannot be used elsewhere l CAUTION: To avoid any malfunctions of the units, and to protect against electric shock, fire or personal injury, please observe the following. Do not connect or disconnect the AC power cord when your hands are wet. [. . . ] (1) Changing method To start A-B repeat play (See page 17. ) SELECT Remarks To select the repeat play mode (See page 17. ) l C (chapter repeat), T (title repeat) or OFF (normal play) [DVD] l T (track repeat), A (disc repeat) or OFF (normal play) [Video CD/CD] To show the current play mode [Video CD/CD only] (See page 16. ) l "---" (normal p!ay), PRG (program play) or RND (random play) SELECT To store a marker To recall a marker To clear a marker CLEAR (5) (See page 18) To select the picture mode [DVD/Video CD only] l N (normal), S (soft), or F (fine) (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [B] (3) (4) means tilting the joystick to the direction *1 This function does not work with an interactive DVD or during menu play of Video CD. Screen for slow motion play and rapid advanced ( reverse) [C] Still/pause Tilt the joystick to the A direction to select " Slow-motion play Tilt the joystick to the direction. ' : Backward (DVD only) : Forward (DVD/Video CD only) " . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [C] Play Tilt the joystick to the direction to select " " Rapid reverse/advance Tilt the joystick to the (Backward)/ (Forward) direction? *1Each time the joystick is tilted, the speed increases in up to 5 steps. 15 Program play [Video CD/CD] The player plays the tracks in the disc in an order you specify. Note: l The program play function cannot be used when connected to a PAL TV. The program playback screen appears on the TV monitor. Choose a track, then press SELECT 17 13 19 28 14 20 39 15 21 4 10 16 5 11 17 6 12 18 Clear last Clear all Press PLAY to start Program play [Video CD/CD] Clearing the program When the program playback screen is displayed Choose a track, then press SELECT 17 13 19 28 14 20 39 15 21 4 10 16 5 11 17 6 12 18 Clear last Clear all Press PLAY to start 2 8 3 5 6 Track numbers included in the disc 2 8 3 5 6 2 Tilt the joystick to the direction and press SELECT, or press the numeric button(s), to select the preferred track number. The selected track is stored in the memory. Choose a track, then press SELECT 17 13 19 28 14 20 39 15 21 4 10 16 5 11 17 6 12 18 Clear last Clear all Press PLAY to start 2 8 3 5 6 l To clear the last program one by one Move to "Clear last", and press SELECT. Press CLEAR of the remote control unit also clears the last program] l To clear all the programs Move to "Clear all", and press SELECT. (The programs are also cleared when the power is turned off or the disc is removed. ) Random play [Video CD/CD] The player plays the tracks in the disc in random order. The random playback screen appears on the TV monitor. Random Playback Press PLAY to start l Repeat step 2 to select another track. l Up to 18 tracks can be programmed. Choose a track, then press SELECT 17 13 28 14 39 15 4 10 16 5 11 17 6 12 18 Clear last Clear all 19 20 21 2 Press PLAY. Play now begins in the random order. 2 8 3 5 6 After playback Play is stopped and the random playback screen is displayed. After playback Play is stopped and the program playback screen is displayed. (The content of the program is still retained in the memory. ) 16 Repeat play Repeat viewing (listening) Press REPEAT MODE during play. Each time this button is pressed, the TV monitor changes as shown below and the disc will repeat a chapter or title (DVD) or a track (Video CD/CD). l DVD Repeat of chapter being played Repeat play To enjoy program repeat play If REPEAT MODE is pressed during program play (see page 16), the display changes as follows Repeat of programmed track being played Repeat of all programs Repeat of title being played Cancel repeat mode (Normal program play) Cancel repeat mode (Normal play) Repeating sections between two specific points (A-B repeat) l Video CD/CD Repeat of track being played 1 Press A-B REPEAT during play at the point where repeat play is to commence (A). Repeat of entire disc contents 2 Press A-B REPEAT at the point where repeat play is to be concluded (B). Cancel repeat mode Repeat play of the selection between points A and B starts. To return to normal play Press A-B REPEAT several times until " To return to normal play Press REPEAT MODE several times until " is displayed. l" l OFF " Notes: l Repeat play works only with discs for which the Notes: l A-B repeat play works only within a title (DVD) or a track (Video CD/CD). l A-B repeat play works only the discs for which the elapsed playing time appears on the unit's display during playback. elapsed playing time appears on the unit's display during playback. *Repeat play may not work correctly with some DVDs l Some subtitles recorded around point A or B may fail to appear. (DVD) 17 Storing markers in memory to be viewed (listened) again Storing a marker in the memory 1 Press MARKER during play. " l " indicates no marker has been stored yet. Changing subtitle language [DVD only] The subtitle language of your player has been factory pre-set to English (This operation works only with discs on which multiple subtitle languages are redorded. ) 1 Press SUBTITLE during play. l When no subtitles are recorded "--" will be dis- played instead of the language number. 2 Press SELECT during play at the starting point to be viewed (listened) again. (If SELECT is pressed where any number is already displayed, the previous starting point will be replaced by the new one. ) Up to 5 markers can be stored in the memory. l Press MARKER to clear the display. 2 Tilt the joystick to the direction until the preferred language is selected. Pressing the numeric button(s) also changes the subtitle language. Recalling/clearing a marker 1 Press MARKER during play l Press SUBTITLE or SELECT to clear the display. 2 Tilt the joystick to the direction to select the marker to be recalled/cleared. To clear/display the subtitles Tilt the joystick to the direction to select ON or OFF at the step 2. Note: l In some cases, the subtitle language is not changed immediately to the select one. 3 Tilt the joystick to the A direction to recall a marker. (The display will be cleared automatically. ) or The selected maker is cleared. (Press MARKER to clear the display. ) For your reference: l When the preferred language is not selected even after tilting the joystick several times, it means that the language is not available on the disc. [. . . ] (Fingerprints, dirt and scratches can cause skipping and distortion. ) Do not write on the label side with a ball-point pen or other writing utensils. Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent. Do not try to close the disc tray when the disc is not installed properly. Be sure to store the disc in its exclusive case when not in use. If the surface is soiled Wipe gently with a soft, damp (water only) cloth. [. . . ]