User manual PALSONIC MODEL 7128

[. . . ] 7 Menu operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Picture menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Preset menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Function menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The item sequence is: PICTURE PRESET FUNCTION Press the VOL button to enter into the sub-menu. Note: the menu displayed on the screen will disappear automatically in 10 seconds if not in operation. 7 1. PICTURE menu Making use of the PICTURE menu can adjust the picture effect according to your personal preference and it will be stored as picture memory mode automatically. Press the CH button to select the item (the selected item is highlighted in red). Below are the characteristics of the picture adjustment item. OSD 0 Pressing Green bar moving VOL VOL Brighter Stronger Stronger Greenish Stronger 63 Item (BRIGHTNESS) (COLOUR) (CONTRAST) (TINT) (SHARPNESS) Darker Lighter Weaker Purplish Weaker Note: * TINT is effective only in NTSC system. * When the receiving TV signals are weaker, please adjust the sharpness to lower level to reduce the noise. * When the receiving TV signals are stronger, please adjust the sharpness to higher level to obtain clearer picture. 8 2. PRESET menu PROG SKIP AFT BAND 28 OFF ON U SYS 1 AUTO SEARCH MANUAL lllllllllll. . . . . . . . . . Making use of the PRESET menu can fulfil the function of auto-search, search. 1) PROG (program) Select the current program number while "PROG" is highlighted. Press VOL increase or decrease the program number progressively. PROG 0 1 2 99 button to 2) SKIP-ON/OFF Press CH button to highlight SKIP ON/OFF. When "SKIP ON" is set, the current channel program will be skipped. Making use of this function can skip some unwanted channel, say 5, 11, next when you press CH button to select channel, 5, 11 channel will be skipped. 0 1 4 6 10 12 * Press the channel direct select button can select the skipped channel. 3) AFT ON/OFF Making use of the AFT function can automatically fine tune the channel. Select and highlight AFT, pressing VOL button it toggles between ON and OFF. When in the process of manual search, AFT is set "OFF" automatically. 4) Band Selection Press the CH button to highlight BAND. The 9 5) SYS ( sound system ) This item is used to select sound system. Since this TV model's RF sound system is B/G only, this item gets into ineffectiveness in sound system selection. 6) Auto - search (AUTO) Press CH button to highlight AUTO. Press VOL button the set will automatically search and store the active TV signals in your local area from lower band to higher band in the sequence of VL VH U with the green bar moving rightward. When a station is located, the set will store the signals with a channel number from 0. When all the signals are searched and stored, the TV returns to 0 channel automatically, auto-search is finished. * After auto-search, all programs colour system is set to AUTO and in AFT-ON mode. * During the process of auto-search, if , MENU or CH button is pressed, the searching is interrupted. Press VOL button the searching begins again. 7) SEARCH Making use of SEARCH function will store a TV program at a referred channel position. [. . . ] Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Symptoms No power, red indicator is not lit up Poor Colour, poor tint Spots appear on the screen Stripes appear on the screen Check the following items . . Double images or "ghosts" Be sure the power cord is plugged in. Contrast, colour, tint are not correctly adjusted Possible interferences of automobiles, motorcycle, trolley bus, neon lamps, etc. [. . . ]