Detailed instructions for use are in the User's Guide.
[. . . ] 12 Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Picture Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Sound Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 System Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] is 1 If the picture's colourthe abnormal, enter into SYSTEM menu, press CH+/to select COLOR, press VOL+/- to select a proper colour system. 2 If the sound isSYSTEM menu, enter into the press CH+/- to select SOUND, press VOL+/- to select a proper sound system. In some model there is only one sound system and in this case the sound system does not need to be adjusted.
14
COLOR SOUND AUTO I
GAME
SYSTEM
COLOR SOUND
AUTO I
SELECT
ADJUST
SELECT
ADJUST
Operations
Channel selection
Making use of direct select buttons Use direct selection buttons
channel 1 To select one-digit button Method 1: press 0-9
AV
X -after 2 seconds X
and wait for 2 seconds.
1 4 7
SC AN D SP
2 5 8 0
3 6 9
VOL
VOL
ME NU
CH
Method 2: press 0 button twice, and then press the channel number. Method 3: press 0 button, then input the number and wait for 2 seconds. Be sure the period of two-press should be within 2 seconds.
CH
SLEEP EDIT SOUND PIC
2 To select two-digit channel
Method 1: Input the channel number using the digit buttons and wait for 2 seconds. Be sure the period of two-press should be within 2 seconds.
X -X Xafter 2 seconds XX
GAME
SYSTEM
Method 2: press 0 button, and then input the channel number. Be sure the period of two-press should be within 2 seconds.
To three digit 3 Justselectthe channel channel input
number. Be sure the period of two-press should be within 2 seconds.
X --
X X-
XXX
Note: the maximum channel number is 255.
15
Operations
Channel selection (continued)
Making use of channel up/down buttons/Previous channel button/Channel scan/channel edit
Use Channel up/down buttons
AV
1 Press CH+ button, the channel number increases. 2 Press CH- button, the channel number decreases.
Use Previous channel button
Press button to switch between the current channel and the previous channel. For example, the channel you previously watched is 11, the current channel is 2, press the button, it will return to channel 11, press the button again it will return to channel 2.
1 4 7
SC AN D SP
2 5 8 0
3 6 9
ME NU
CH VOL VOL
3
PIC
Channel scan
Press SCAN button, the set will scan the channel from the current channel to higher channels one by one until all the programs are scanned over and then stop. During scanning, pressing any button will stop it and the screen will settle at the current scanned program.
2
CH
SLEEP EDIT SOUND
CHANNEL SCANNING
GAME
SYSTEM
Channel edit
button to display 1 Press EDITEXCHANGE CHANNEL menu. select 2 Press CH+/-1, touse VOL+/- to CHANNEL set the number which you want to swap, for example, channel 6.
CHANNEL EXCHANGE
CHANNEL 1 CHANNEL 2 EXCHANGE
SELECT ADJUST
6 10
You can press DSP button twice to display the current time of the TV set, press again to cancel.
select 3 Press CH+/-2, touse VOL+/- to CHANNEL set the number which you want to swap to, for example, channel 10. VOL+ or VOL- and the channel and Repeat the above steps to edit the programs in your favourite order.
16
Operations
Picture adjustment
Picture adjustment To select the picture mode
You can select the picture quality instantly among three modes and one user-set mode.
AV
1 4 7
SC AN D SP
2 5 8 0
3 6 9
Press the PIC button to select the desired picture quality. BRILLIANT, STANDARD, SOFTNESS and PERSONAL (user-set) can be selected cyclically.
BRILLIANT STANDARD SOFTNESS PERSONAL
VOL
VOL
CH
SLEEP EDIT SOUND PIC
ME NU
CH
Picture quality Mode BRILLIANT Display more brightness and contrast pictures Display normal pictures STANDARD Display mild pictures SOFTNESS The picture quality you set PERSONAL
Adjusting picture
PICTURE SOUND TIMER TUNING SETUP
GAME
SYSTEM
1 Press MENU button. menu, 4 In PICTURE desiredpress CH+/to select the item, press VOL+/- to adjust.
Item Contrast Brightness Colour Tint Sharpness Noise reducer VOLweaker darker paler purplish softer
SELECT
CONFIRM
PICTURE SOUND TIMER TUNING SETUP
CONTRAST BRIGHT COLOR SHARP NOISE REDU. 40 50 50 50 OFF
SELECT
ADJUST
CONTRAST
50
VOL+ stronger lighter deeper greenish sharper ON/OFF
Notes: Tint is only for NTSC system. The adjusted level is stored in the PERSONAL position.
17
Operations
Sound adjustment
Sound adjustment Adjusting volume
Use button. 1 PressVOL+ or VOL-the volume VOL+ button,
AV
1 4 7
SC AN D SP
2 5 8 0
3 6 9
increases; Press VOL- button, the volume decreases.
VOLUME
50
(MUTE) button. 2 Use want to mute the sound, If you
press button on the remote control. To restore the sound, press this button again.
VOL
VOL
ME NU
CH
CH
SLEEP EDIT SOUND PIC
Notes:
You can also restore the sound by pressing VOL+ or VOLbutton.
GAME
SYSTEM
18
Adjusting sound
PICTURE SOUND TIMER TUNING SET UP
AV
1 2 Press VOL+ or VOL- button to select SOUND icon.
Press MENU button. Press CH- to enter into SOUND menu.
BASS TREBLE BALANCE S. WOOFER S. WOOFER SURROUND
SELECT ADJUST
+20 +30 ±00 OFF 50 OFF
1 4 7
SC AN D SP
2 5 8 0
3 6 9
BASS
+16
3 In SOUND menu press item, CH+/- to select desired
press VOL+/- to adjust.
Item BASS TREBLE BALANCE VOLWeaker Weaker Decrease the right channel VOL+ Stronger Stronger Decrease the left channel
VOL
VOL
CH
SLEEP EDIT SOUND PIC
ME NU
CH
S. WOOFER S. WOOFER SURROUND
ON/OFF Stronger Weaker OFF/HARD/SOFT/STEREO
GAME
Note: if in the TV (RF) mode, Surround sound can be switched between OFF and Stereo. In VIDEO or DVD mode, Surround sound can be switched between OFF/SOFT/HARD.
SYSTEM
Sound mode selection
You can select the sound quality instantly among three preset modes and one user-set mode. [. . . ] Every time you hit a torpedo or opponent submarine, you gain 100 points. If the yellow submarine is hit by torpedo or opponent submarine, the game is over (GAMEOVER).
3 To restart the game, press CH+ button. 4 Press GAME button to exit.
24
Other
Troubleshooting Guide
Troubleshooting Guide
Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing.
Symptoms
Power is not turned on Poor colour, poor tint Spots appear on the screen Stripes appear on the screen
Check the following items
Be sure the power cord is plugged in. Contrast, colour, tint are not correctly adjusted Possible interferences of automobiles, motorcycle, trolley bus, neon lamps, etc. [. . . ]