User manual PANASONIC CZRD513C
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC CZRD513C. We hope that this PANASONIC CZRD513C user guide will be useful to you.
You may also download the following manuals related to this product:
PANASONIC CZRD513C (97 ko)
PANASONIC CZRD513C (97 ko)
PANASONIC CZRD513C (101 ko)
PANASONIC CZRD513C (205 ko)
PANASONIC CZRD513C (98 ko)
PANASONIC CZRD513C (96 ko)
PANASONIC CZRD513C (97 ko)
PANASONIC CZRD513C (202 ko)
PANASONIC CZRD513C (192 ko)
PANASONIC CZRD513C (196 ko)
Manual abstract: user guide PANASONIC CZRD513C
Detailed instructions for use are in the User's Guide.
[. . . ] When AUTO is set, the louver swing mode can be selected from standard, upward and downward. Note: During DRY operation, it is normal that the louver movement may not follow remote control display OFF/ON Indicator LED This indicator lights up when the air conditioner is running. Message Display ODOUR WASH - Lights up during odour wash (odour removing) operation and flashes while odour wash (odour clear) is being set. NOT AVAILABLE - Lights up when the function is not available for operation. [. . . ] Example: Current Day is Wednesday and Current Time is 8:00
OFF/ON button This button is used to run or stop the air conditioner. Fan Speed button This button is used to change fan speed to Auto, Low, Medium and High.
REMOTE LOCAL HEAT FAN COOL PRIORITY
1 2 3 4 5 6 FAN SPEED MON TUE WED THU FRI SAT SUN AUTO
TIMER
AIR SWING ECO OFF ADDRESS A/C No. ODOUR WASH CHECK SET AUTO 123 TEST RUN NOT AVAILABLE VENT.
PRE HEAT DEFROST DEMAND
ON
LO MED HI
AUTO HEAT FAN COOL DRY FILTER RESET
Operation Mode button This button is used to change operation mode to "FAN", "COOL", "DRY", "AUTO" and "HEAT". Temperature Setting button This button is used to set the room temperature.
1 2
Turn on the power supply Press "SELECT button"
TIMER/CLOCK MODE UP SET
OFF / ON
TEMP/ A/C No. UP
TIMER/CLOCK MODE
UP
SET
FAN SPEED
MODE
SELECT
DOWN CANCEL
AUTO
MANUAL
DOWN
Manual Airflow Direction Selection button Fix the airflow direction manually. Filter Reset button After the filter has been cleaned, press this button to clear the "FILTER RESET" display. Auto Airflow Direction Selection button This button is used to select "Multi Comfort Air Control" (Automatic louver swing direction). Ventilation button When a ventilating device (optional) is attached, this button is used to run and stop the ventilating device. Economy button This button is used to run and stop the economy operation.
SELECT
DOWN CANCEL
ECONOMY CHECK ODOUR WASH
AIR SWING
VENTILATION TEST RUN FILTER RESET
Below displays will appear
MON
"MON" and "12:00" will be blinking
3 4
Select Current Day
To set the current day, press "UP or DOWN button" to select current day. (Refer to above example; select WED) To confirm the selected day, press "SET button".
Select Current Time
To set the current time, press "UP or DOWN button" to select current time. (Refer to above example; select 8:00) To confirm the selected time, press "SET button".
Odour Wash button This button is used to run and stop the odour wash (odour removing) operation. Long pressing of this button starts odour wash (odour clear) operation. Timer Setting button Group This button group is used for timer setting. Basic functions of each button are as follows: MODE - Changes clock and timer display or goes back to the previous display SELECT - Starts timer setting mode UP - Increases the time DOWN - Decreases the time SET - Confirms general settings and timer setting. Cancels all the timer settings collectively.
Note : - Press "UP button" to increase or "DOWN button" to decrease (interval 1 minute) or hold the button to change the time faster. - If the "UP or DOWN button" is not pressed for 30 seconds during the day or time setting or if the "SELECT button" is pressed, the setting at that moment is confirmed and setting will end. Final CLOCK Display
WED
":" will be blinking
3
4
How to Select the Timer
2 types of Timer mode can be selected on the remote control. - Daily Timer - Weekly Timer These timers cannot be operated simultaneously. Select one of these Timers for your convenience.
Daily Timer Setting
Display
Will light up if Timer operation is selected
TIMER
ON-Timer To automatically switch "ON" the unit
How to Change the Display
MODE
ON OFF
OFF-Timer. To automatically switch "OFF" the unit
Time to be selected (interval 10 minutes)
- Press once to change the display from CLOCK to Timer or vice-versa. [. . . ] Only Saturday: 1st program ON 10:00 with 20°C & 2nd program OFF 14:00. No need to set any Timer.
Day to be selected ON-Timer To automatically switch "ON" the unit
123456 MON TUE WED THU FRI SAT SUN
TIMER
Indicate the selected day Time to be selected (interval 10 minutes)
ON OFF
OFF-Timer. To automatically switch "OFF" the unit
How to Set Weekly Timer
- You can set the Timer for 1 week (Monday to Sunday) with 6 programs per day. - You also may select Collective - many days with same time setting or Individual single/one day setting.
MON TUE WED THU FRI SAT SUN To set A (Monday to Friday Collective day setting) Press "SELECT button", To select Monday to Friday, deselect Saturday and Sunday by pressing "UP or DOWN button" to Saturday, press "SET button" (triangle mark on top of Saturday will disappear) Follow the same step to deselect Sunday. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC CZRD513C
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC CZRD513C will begin.