User manual PANASONIC WHADC0309H3E5UK

[. . . ] Indoor Unit WH-ADC0309H3E5UK Outdoor Unit WH-UD03HE5-1 WH-UD05HE5-1 WH-UD07HE5-1 WH-UD09HE5-1 Quick Menu Guide Air-to-Water Hydromodule + Tank Installation Instructions attached. Serial number and production year please refer to name plate. Manufactured by: Panasonic Appliances Air-Conditioning Malaysia Sdn. [. . . ] Press to confirm your selection. is (The powerful operation starts approximately 1 minute after pressed. ) • Powerful mode is set off. Powerful • The Powerful mode operates for 30 minutes. • The Powerful mode operates for 60 minutes. • The Powerful mode operates for 90 minutes. ■ Note: • Powerful is disabled when operation is turned OFF. 3 Select this icon to operate quietly. Press to confirm your selection. is pressed. ) (The quiet operation starts approximately 1 minute after • Quiet mode is set off. Quiet • The Quiet mode operates at level 1. • The Quiet mode operates at level 2. • The Quiet mode operates at level 3. Level 3 is the most quiet mode. • Select this to set a timer for the Quiet mode operation. • Select “Yes” using buttons. Select pattern “1” ~ “6”. Select “Edit”. • If you select “Delete”, the timer setting of the selected pattern will be deleted. Set the hour and minutes. Select the level of Quiet. ■ Note: • If the time overlaps with another pattern, "Set time is overlapped!" will appear on the screen. 4 How to use the Quick Menu Select to force the Heater on. Press to confirm your selection. is (The Force Heater mode starts approximately 1 minute after pressed. ) • Force Heater is turned off. Force Heater • Force Heater is turned on. ■ Note: • Force Heater is disabled whenever operation is already on and ‘Disabled due to operation ON!’ will be displayed. 5 Select this icon to delete (cancel) or change the pre-set Weekly Timer. Press to confirm your selection. • Timer is not ON. Weekly Timer • Timer is set. • If you select “No”, the screen will return to the Main Screen. • Timer setup: Select Timer setup to edit the Weekly Timer. [Example of a Timer setup] Select the day(s) which you wish to edit using buttons. If all 6 patterns are not preset, this screen will be displayed. 1 Select pattern “1” ~ “6”. / • Select mode using 5 Set the temperature for both Zone 1 and 2 (if your system has the 2-Zone setting). 6 Set the Tank temperature. ■ Note: • Timer is disabled when Force Heater is turned on or Heat-Cool SW is enabled. [. . . ] Press to confirm your selection. (When the mode has been accepted, below screen will be displayed. ) Select “Yes”. (The Main Screen will be locked. ) • If “No” is selected, the screen will return to the Main Screen. R/C Lock To unlock the Remote Controller Press any key. (When the mode has been accepted, below screen will be displayed. ) Enter any 4 digits of number (if the number is correct, the screen will be unlocked). To reset forgotten password (under operation OFF screen) Press , and continuously for 5 seconds. (When the mode has been accepted, below screen will be displayed. ) Select “Reset”. (The screen will be off after 3 seconds. ) 7 Country UK/England UK/Ireland Telephone Number +44 (0) 134 485 3393 +353 (0) 872 696 043 Panasonic Corporation Web site: http://www. panasonic. com © Panasonic Corporation 2016 Printed in Malaysia Authorised representative in EU Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany ACXF55-03400 SS0416-0 [. . . ]