User manual PHILIPS HQ 6906

[. . . ] €1) 1 2 3 4 5 6 7 8 Protection cap Shaving unit Shaver on/off slide Mains cord with plug Appliance plug Trimmer (HQ6946, HQ6940 only) Trimmer slide (HQ6946, HQ6940 only)  Cleaning brush Using the appliance Shaving 1 Put the appliance plug in the shaver. Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. [. . . ] Contact the Consumer Care Centre in your country about the availability of this accessory. You can also clean the shaver in the following way: Every week: shaving unit and hair chamber 1 Switch off the shaver. Remove the mains plug from the wall socket and pull the appliance plug out of the shaver. 8 English 3 Press the release button (1) and remove the shaving unit (2). 4 Clean the inside of the shaving unit and the hair chamber with the cleaning brush. After cleaning, lubricate the central point on the inside of the guards with a drop of sewing machine oil to prevent wear of the shaving heads. Trimmer (HQ6946/HQ6940 only) Clean the trimmer every time you have used it. Remove the mains plug from the wall socket and pull the appliance plug out of the shaver. 10 English 2 Clean the trimmer with the cleaning brush supplied. Tip: Lubricate the trimmer teeth with a drop of sewing machine oil every six months. [. . . ] 11 Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. €If you are unable to solve the problem with the information below, visit www. [. . . ]