User manual PROGRESS 4IN1

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PROGRESS 4IN1. We hope that this PROGRESS 4IN1 user guide will be useful to you.


PROGRESS 4IN1 : Download the complete user guide (416 Ko)

You may also download the following manuals related to this product:

   PROGRESS 4IN1 (367 ko)
   PROGRESS 4IN1 (430 ko)

Manual abstract: user guide PROGRESS 4IN1

Detailed instructions for use are in the User's Guide.

[. . . ] Dust bags Extension tubes (x2) (some models) Telecopic tube (some models) Swivel hose and handle with manual suction control All purpose floor nozzle Narrow crevice nozzle Upholstery nozzle The cleaner is for domestic use only and has been designed to ensure maximum safety and performance. The cleaner is double-insulated so it must not be earthed The cleaner is only to be used by adults Always store in a dry place Do not use to pick up liquids Avoid sharp objects Do not pick up hot cinders or lighted cigarette ends Do not use near flammable gases Avoid tugging on the mains cable and check cable regularly for damage Note: Do not use cleaner with a damaged cable. [. . . ] If damaged the cable should be replaced at a Progress Service Centre The plug must be removed from the socket-outlet before cleaning or maintaining the appliance All service and repairs must be carried out by authorised Progress service staff Accessory compartment (for narrow crevice nozzle and upholstery nozzle) Storage slot for floor nozzle and extention tubes when not in use Storage slot for floor nozzle and extention tubes when in use To avoid blockages and maintain suction efficiency, the floor nozzle should be cleaned regularly using the hose handle. Dust bag safety device To avoid damaging the cleaner, do not use it without a dust bag. A safety device is fitted which prevents the cover closing without a dust bag. Changing/Cleaning the filters There are two filters inside your cleaner. To clean Motor Protection filter: The Motor Protection filter should be cleaned when dirty. Before removing the dust bag, bend the tab into the hole to prevent dust escaping. * if there is a bad smell from the cleaner, then you should also change the filter. Power: If the electric power does not come on, disconnect from mains and check plugs, cable and fuses where appropriate. Blockages/dirty filters: The cleaner may switch itself off in the event of a severe blockage or excessively dirty filter(s). In such cases, disconnect from mains and allow to cool for 20-30 minutes. [. . . ] In such cases, disconnect from mains and allow to cool for 20-30 minutes. Water: If water is sucked into the cleaner the motor must be changed at a Progress Service Centre. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PROGRESS 4IN1




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PROGRESS 4IN1 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.