User manual PROGRESS PC2114

[. . . ] Depends on the model modell-abhänging suivan le modéle depende del modelo depende do modelo a seconda del modello hangt van het model af mallista riippuen beror på modellen modelltl függen w zalenoci od wersji zavisno od modela v závislosti od verzie zálezí na provedení Before using the appliance, check that the mains power voltage corresponds to the voltage shown on the rating plate. Do not switch the appliance on if it appears to be faulty in any way or it has a damaged cord or plug. [. . . ] Before placing into operation make certain that the filters are in the proper position. Before using the appliance, unwind a sufficient length of cable and insert the plug into the power socket. It is advisable to set the power control to MIN before switching on the appliance (PC2102, 2109, 2110, 2114, 2115). To rewind the power cable, press the rewind button with foot, and guide the cable with hand to ensure that it does not whip causing damage. By moving the variable power control, the suction power can be adjusted (PC2102, 2109, 2110, 2114, 2115). If you forget to attach the dustbag or attach it in the wrong manner, the dust cover may not close completely. Replace the plastic clip ensuring that both sides of the bag are parallel (fig. The dustbag must be replaced if the window of the dustbag full indicator is completely red when the cleaner is operating at maximum power and the nozzle is raised from the floor. Filters should be replaced at least twice a year or when they become visibly soiled. Always operate the cleaner with filters installed to avoid reduced suction. [. . . ] Blocked air flow and dirty filters: The cleaner stops automatically if a blockage occurs in the nozzle/tube/hose or if the filters are blocked with dirt. Disconnect from mains and allow the cleaner to cool for 20-30 minutes. [. . . ]