User manual PROGRESS PC22CUP

[. . . ] 19. 15:44 Page 4 English PROGRESS PC 2100, 2101, 2102, 2108, 2109, 2110 DESCRIPTION 1. Suction inlet Dustbag full indicator Variable power control (PC 2102, 2109, 2110) On/off switch Cable rewind button Wheel Dustbag compartment Carrying handle Compartment open button Hose Plastic tubes(PC 2101, 2108) 12. [. . . ] Metal tubes (PC 2100, 2102, 2109) Telescopic tube (PC 2110) Floor nozzle (PC 2100, 2101) Dual purpose floor nozzle (PC 2102, 2108, 2109, 2110) Upholstery nozzle (PC 2102, 2108, 2109, 2110) Crevice nozzle Dustbag Clothbag (PC 2100, 2101, 2102) Horizontal parking IMPORTANT SAFEGUARDS !Before using the appliance, check that the mains power voltage corresponds to the voltage shown on the rat- ing plate. !Do not switch the appliance on if it appears to be faulty in any way or it has a damaged cord or plug. For repairs or accessories, contact Electrolux Customer Services on 08706 055 055. Always remove the plug from the power socket when the appliance is not in use and before carrying out any cleaning or maintenance operations. Do not use appliance on wet surfaces or to vacuum liquids, mud, ash and burning cigarette butts. Do not vac- uum up any highly flammable or explosive substances or gases. ! operating at maximum power and the nozzle is raised from the floor. Filters should be replaced at least twice a year or when they become visibly soiled. Always operate the cleaner with filters installed to avoid reduced suction. Pull dustbag upward and remove the motor protection filter with grill (fig. 29) Place the filter back into the grill and put it back into the cleaner. Deposit the plastic bag made of polyethylene (PE) at the PE collection point for recycling. Recycling the Appliance at the end of its life: !The plastic components all carry a material identification marking so that, like the other materials, they can recycled at the end of the life of the appliance. [. . . ] Deposit the plastic bag made of polyethylene (PE) at the PE collection point for recycling. Recycling the Appliance at the end of its life: !The plastic components all carry a material identification marking so that, like the other materials, they can recycled at the end of the life of the appliance. [. . . ]