User manual PROGRESS PC4206

[. . . ] ifu 42xx press. qxd 12/5/03 1:05 PM Page 1 PC4206 PC4207 PC4208 PC4220 PC4260 PC4280 4501 02 03 03 ifu 42xx press. qxd 12/5/03 1:05 PM Page 3 19. 20. 21. 22. 23. 24. 25. 26. 18 ifu 42xx press. qxd 12/5/03 1:05 PM Page 5 PROGRESS PC 4206, 4207, 4208, 4220, 4260, 4280 English Deutsch Francais Nederlands Italiano Hungarian Polish Croatian Slovak Czech ifu 42xx press. qxd 12/5/03 1:05 PM Page 7 English PROGRESS PC 4206, 4207, 4208, 4220, 4260, 4280 DESCRIPTION 1. Suction inlet Dustbag full indicator Variable power control Cable rewind button On/off switch Wheel Dustbag compartment Carrying handle Compartment open button 10. [. . . ] Do not operate the vacuum cleaner too close to heaters and radiators, stoves etc. Before you start using the vacuum cleaner, please remove large or sharp objects from the floor to prevent damage to the cloth dustbag. INSTRUCTIONS FOR USE Before placing into operation make certain that the filters are in the proper position. Before using the appliance, unwind a sufficient length of cable and insert the plug into the power socket. It is advisable to set the power control to MIN before switching the appliance on. To rewind the power cable, press the rewind button with foot, and guide the cable with hand to ensure that it does not whip causing damage. By moving the variable power control, the suction power can be adjusted. -1- ifu 42xx press. qxd 12/5/03 1:05 PM Page 9 PROGRESS PC 4206, 4207, 4208, 4220, 4260, 4280 MAINTENANCE REPLACING THE DUSTBAG Always operate the cleaner with the dustbag installed. If you forget to attach the dustbag or attach it in the wrong manner, the dust cover may not close completely. Dustbag reference number in Switzerland: MI 06. REPLACING THE FILTERS The dustbag must be replaced if the window of the dustbag full indicator is completely red when the cleaner is operating at maximum power and the nozzle is raised from the floor. Filters should be replaced at least twice a year or when they become visibly soiled. Always operate the cleaner with filters installed to avoid reduced suction. [. . . ] Blocked air flow and dirty filters: The cleaner stops automatically if a blockage occurs in the nozzle/tube/hose or if the filters are blocked with dirt. Disconnect from mains and allow the cleaner to cool for 20-30 minutes. [. . . ]