User manual PROGRESS PC7195

[. . . ] This means that with your specific model, some accessories may not be inclued. Please refer to the packaging to see the accessories that are supplied with your model. [. . . ] Ø Unwind a sufficient length of cable and insert the plug into the power socket. On initial start up full power is reached after approximately 1-2 seconds. Ø To rewind the power cable, press the rewind button with foot, and guide the cable with hand to ensure that it does not whip causing damage. Insert the dust compartment back into the cleaner by pressing it down until it clicks (fig. Ø The dust container must be emptied if the window of the electronic filter indicator is illuminated when the cleaner is operating at maximum Power and the nozzle is raised from the floor. Ø Filters should be replaced at least twice a year or when they become visibly soiled. Always operate the cleaner with filters installed to avoid reduced suction. Ø Disconnect from electrical outlet before changing the filters. Ø Remove the cartridge filter by turning it counter-clockwise (A) and pull it out (B) (fig. Ø Air dry for approximately 24 hours, to ensure it is completely dry before re-using. [. . . ] Ø The plastic components all carry a material identification marking so that, like the other materials, they can recycled at the end of the life of Ø The cleaner stops automatically if a blockage occurs in the nozzle/tube/hose or if the filters are blocked with dirt. Ø Disconnect from mains and allow the cleaner to cool for 20-30 minutes. [. . . ]