User manual SAECO SM5470/10 PICO BARISTO

[. . . ] 27 Lid of milk dispensing unit Congratulations on your purchase of a Saeco full-automatic coffee machine!To fully benefit from the support that Saeco offers, please register your product at www. Read the separate safety booklet carefully before you use the machine for the first time and save it for future reference. To help you get the best out of your coffee machine, Saeco offers full support in 3 different ways: 1 The separate quick start guide for first installation and first use. [. . . ] 1 Pour the contents of the milk circuit cleaner sachet in the milk carafe. 2 Insert the milk carafe into the machine and place a container under the milk dispensing spout. 5 When the carafe is empty, remove the container and the milk carafe from the machine. 6 Rinse the milk carafe thoroughly and fill it with fresh water up to the MAX level indication. 9 Press the MENU button and select MILK FROTH in the DRINKS menu to start the carafe rinsing cycle. 12 When the machine stops dispensing water, the cleaning cycle is finished. 13 Disassemble all the components and rinse them under a lukewarm tap. Under no circumstances should you use a descaler based on sulfuric acid, hydrochloric acid, sulfamic or acetic acid (vinegar) as this may damage the water circuit in your machine and not dissolve the limescale properly. Without being prompted by the machine, press the MENU button, scroll to select START CALC CLEAN and press the OK button to confirm. Insert the milk carafe into the machine and open the milk dispensing spout. - The display reminds you that you have to open the milk dispensing spout. - The display reminds you that you have to remove the AquaClean filter. 2 Remove the drip tray and the coffee grounds container, empty them and put them back into place. 5 Pour the whole bottle of Philips descaler in the water tank and then fill it with water up to the CALC CLEAN level (Fig. Then place it back into the machine and press the OK button to confirm. 7 Let the machine dispense the descaling solution until the display reminds you that the water tank is empty. 8 Empty the water tank, rinse it and then refill it with fresh water up to the CALC CLEAN level indication. Fill it with fresh water up to the MIN level indication and reinsert it into the machine. 10 Empty the container and place it back under the coffee dispensing spout. 11 The second phase of the descaling cycle, the rinsing phase, starts and lasts 3 minutes. The descaling procedure is finished when the tick appears on the display. The machine starts heating up and performs the automatic rinsing cycle. [. . . ] The machine is not placed on a Place the machine on a horizontal I cannot activate the AquaClean filter and the machine asks for descaling. The filter has not been replaced Descale your machine first and then In time after the AquaClean You did not install the AquaClean filter during first installation, but after having brewed approx. The machine has to be completely limescale-free before you install the AquaClean filter. The new water filter does You are trying to install another Only the AquaClean filter fits into the The machine is making a It is normal that your machine Makes noise during use. [. . . ]