User manual SAECO TYPE SIN 010

[. . . ] Keep the instructions in a safe place or attach them to the machine for easy consultation by others. If you desire any further information or have a problem not sufficiently covered by this leaflet please contact our qualified experts. The manufacturer reserves the right to change the make up of the machine in the light of any technological breakthrough. All electrical parts must be kept dry, as the machine may short circuit on contact with water. [. . . ] To warm up the filter holder and the cup, press the coffee switch (4); water will begin to drip from the filter holder (this operation is only necessary for the first cup of coffee). ⷠWhen the cup is sufficiently full, press the coffee switch (4) again. ⷠRemove the filter holder from the machine by turning it to the left and pour out any water that is left inside. ⷠWith the special "Crema" filter holder (13) supplied with the machine, it is not necessary to change the filter to obtain one or two cups of coffee. ⷠTo make one or two cups of coffee, add 1 or 2 even measures of ground coffee to the filter. ⷠClean the edges of the filter holder from any excess of coffee grounds. ⷠFit the "Crema" filter holder (13) into the coffee outlet socket (7), as explained before, pushing it upwards and turning it to the right until it locks into place. position two warmed cups under the · Filter holder, making sure that they are directly under the coffee spouts. ⷠPress the coffee switch again to stop the coffee flow. ⷠWhen the coffee flow has ceased, remove the filter holder and empty out the excess coffee grounds. Cleaning note: always keep the "Crema" filter holder clean by removing it and washing it with drinking water. Do not remove the filter holder by turning it manually in a clockwise direction while the machine is producing coffee. While the machine is working the "machine on" light (9) will go on and off. ⷠBefore using the machine, make sure that the "hot water/steam" knob (6) is closed and that there is sufficient water in the tank. If the coffee maker is not working the light on the inside of the main switch (3) will light up. ⷠWait for the "machine on" light (9) to be on. Note: we recommend emptying the water tray when the level float (12) rises. Fit the "Crema" filter holder into the coffee outlet socket (7), pushing it upwards and turning it to the right until it locks into place. Place the filter (16 or 17, single or twin cup, depending on the number of Fit the filter holder into the coffee outlet socket (7), pushing it upwards and turning it to the right until it locks into place. To warm up the filter holder and the cup, press the coffee switch (4); water will begin to drip from the filter holder (this operation is only necessary for the first cup of coffee). ⷠWhen the cup is sufficiently full, press the coffee switch (4) again. To make one or two cups of coffee, add 1 or 2 even measures of ground coffee to the filter, depending on whether you are using the single or twin cup filter. [. . . ] ⷠWe would also like to bring to the customer 's attention that these instructions are not part of any previous or existing convention, agreement or legal contract and hence have no legal bearing. Which includes the complete and exclusive regulation regarding guarantee requirements. The terms of the guarantee are in no way affected by these instructions. The instructions may not be photocopied or translated into a foreign language without the manufacturer 's written permission. [. . . ]