User manual SAMSUNG SYNCMASTER S19B420BW

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SAMSUNG SYNCMASTER S19B420BW. We hope that this SAMSUNG SYNCMASTER S19B420BW user guide will be useful to you.


SAMSUNG SYNCMASTER S19B420BW : Download the complete user guide (7970 Ko)

You may also download the following manuals related to this product:

   SAMSUNG SYNCMASTER S19B420BW (9855 ko)

Manual abstract: user guide SAMSUNG SYNCMASTER S19B420BW

Detailed instructions for use are in the User's Guide.

[. . . ] (When the SOURCE button is pressed to change the input mode, a message appears in the upper left of the screen displaying the current mode -- analog or digital input signal. ) If you select the digital mode, you must connect your monitor to the graphic card's DVI IN port using the DVI cable. >> Click here to see an animation clip Use this button for turning the monitor on and off. This light glows blue during normal operation, and blinking blue once as the monitor saves your adjustments. AUTO button Power button [ ] Power indicator See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. Rear The configuration at the back of the monitor may vary from product to product. [. . . ] - Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. - Connect the DVI Cable to the DVI IN port on the back of your Monitor. - Connect the monitor to the Macintosh computer using the D-sub connection cable. Turn on your computer and monitor. If your monitor displays an image, installation is completed. Using the Stand Folding the base You can tilt the monitor upwards at an angle of 0° to18°. Model Check List Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer. Symptom No images on the screen. I cannot turn on the monitor. Check List Is the power cord connected properly?Can you see "Check Signal Cable" on the screen? Solutions Check the power cord connection and supply. (Connected using the D-sub cable) Check the signal cable connection. (Connected using the DVI cable) If you still see an error message on the screen when the monitor is connected properly, check to see if the monitor status is set to analog. Press SOURCE/ button to have the monitor doublecheck the input signal source. If the initial screen (the login screen) appears, boot the computer in the applicable mode (the safe mode for Windows ME/XP/2000) and then change the frequency of the video card. (Refer to the Preset Timing Modes) If the initial screen (the login screen) does not appear, contact the Service Center or your dealer. If the power is on, reboot the computer to see the initial screen(the login screen), which can be seen. Can you see "Not Optimum Mode", "Recommended Mode 1680 X 1050 60 Hz" on the screen? You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly. When you have a problem with the graphic card, visit our website to check the compatible graphic card list provided. http://www. samsung. com/monitor/magictune MagicTuneTM doesn't work properly. Have you changed your PC or video graphic card?The program can be downloaded http://www. samsung. com/monitor/magictune Reboot the computer after installing the program for the first time. If a copy of the program is already installed, remove it, reboot the computer, and then install the program again. You need to reboot the computer for it to operate normally after installing or removing the program. Visit the MagicTuneTM website and download the installation software for MagicTuneTM MAC. Check if the power cord and the video cables are properly connected to the computer. (If it does, ask the service center to check the main board of the computer. ) If you installed a new video card or if you assembled the PC, check if the installed the adapter(video) driver and the monitor driver. Check if the scanning ratio of the video screen is set to between 56 Hz ~ 75 Hz. (Do not exceed 75 Hz when using the maximum resolution. ) If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel System Device Administrator" and then reboot the computer to reinstall the adapter (video) driver. If problems repeatedly occur, contact an authorized service center. Q&A Question How can I change the frequency?Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details. ) How can I adjust the resolution? [. . . ] Windows ME/2000 : Set the resolution in the Control Panel Display Screen Saver. Refer to the Windows / Computer Manual How can I clean the outer case/LCD Panel?Disconnect the power cord and then clean the monitor with a soft cloth, using either a cleaning solution or plain water. Do not let any water enter the monitor. Self-Test Self-Test Feature Check | Warning Messages | Environment | Useful Tips Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. Self-Test Feature Check Turn off both your computer and the monitor. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SAMSUNG SYNCMASTER S19B420BW




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SAMSUNG SYNCMASTER S19B420BW will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.