User manual SAMSUNG DV393ETPAWR

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SAMSUNG DV393ETPAWR. We hope that this SAMSUNG DV393ETPAWR user guide will be useful to you.


SAMSUNG DV393ETPAWR : Download the complete user guide (12535 Ko)

Manual abstract: user guide SAMSUNG DV393ETPAWR

Detailed instructions for use are in the User's Guide.

[. . . ] Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service or accessory parts, please register your product at or contact www. Extra Large Capacity Ultra drying capabilities are at your fingertips!Capacity dryer circulates more air through your clothes, drying them faster for a wrinkle-free result. [. . . ] You have used rigid or stiff-walled flexible metal duct material, not plastic flexible duct. Indd Sec5:22 2013-08-20 3:14:01 CONNECTING THE INLET HOSE Method1 - Using the Y Connector and Long Hose The dryer must be connected to the cold water faucet using the new inlet hoses. If you have a washer water hose attached to the cold water faucet, Y-Connector unscrew and remove the hose. If space permits, attach the brass female end of the “Y”connector to the cold water faucet. Attach the straight end of the long hose to the “Y’ connector. Using pliers, tighten the hose coupling with an additional two thirds Duct Exhaust turn. Attach the angled end of the long hose to the fill valve at the bottom of the dryer’s rear frame. Using pliers, tighten the hose coupling with an additional two thirds turn. Attach the water hose to the other side of the “Y” connector. Using pliers, tighten the coupling with an additional two thirds turn. Check for leaks around “Y” connector, faucets, and hoses. Check for leaks around “Y” connector, faucets and hoses. Method2 - Using the Short Hose, Long Hose, and Y Connector The dryer must be connected to the cold water faucet using the new inlet hoses. If the “Y” connector cannot be attached directly to the cold water faucet, then you must use the short hose. If you have a washer water hose attached to the cold water faucet, (Inlet to cold unscrew and remove the hose. Screw on the “Y’ connector coupling by hand until it is tight. Using pliers, tighten the coupling with an additional two thirds turn. Attach the ‘Y” connector to the stainless male end of the small hose. Using pliers, tighten the coupling with an additional two thirds turn. Attach the angled end of the long hose to the fill valve at the bottom of the dryer rear frame. Using pliers, tighten the coupling with an additional two thirds turn. Check for leaks around “Y” connector, faucets, and hoses. [. . . ] SAMSUNG does not warrant uninterrupted or error-free operation of the product. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific rights, and you may also have other rights, which vary from state to state. Com/ca_fr (French) Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SAMSUNG DV393ETPAWR




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SAMSUNG DV393ETPAWR will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.