Detailed instructions for use are in the User's Guide.
[. . . ] OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN
ESPAÑOL
LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO
FRANÇAIS
LC-65D93U
ENGLISH
LC-65D93U
LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL
· The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. · Menu items that are not selectable are grayed out.
IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV.
Model No. : Serial No. :
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] See page 27.
26
Basic adjustment settings Advanced picture adjustments
This TV provides various advanced functions for optimizing the picture quality.
3D-Y/C
Provides high quality images with minimal dot crawl and cross color noise.
Selected item Standard Fast Slow Description Normal adjustment For moving images For still images
1 2 3
Press MENU to display the MENU screen, and then press c/d to select "Picture". Press a/b to select a specific adjustment item, and then press ENTER.
· You can select "Color Temp. ", "Black", "Fine Motion Advanced", "3D-Y/C", "Monochrome", "Film Mode" or "Range of OPC".
NOTE · 3D-Y/C is available for input signal from Composite Video and analog broadcasts (air and cable).
4 5
Press a/b (or c/d) to select the desired parameter.
· See the table for the selectable parameters.
Monochrome
For viewing a video in monochrome.
Selected item On Off Description For viewing in monochrome Normal color
Press MENU to exit.
Color Temperature
For a better white balance, use color temperature correction.
Selected item High Mid-High Middle Mid-Low Low Description White with Bluish tone
Film Mode (3:2 pull-down)
Automatically detects a film-based source (originally encoded at 24 frames/second), analyzes it then recreates each still film frame for high-definition picture quality.
Selected item Description Detects, analyzes, converts film source Normal viewing mode
White with Reddish tone
On Off
Black
Changes the viewing depth by automatically adjusting the dark portion of an image for easier viewing.
Selected item On Off Description For high detail in black portions No adjustment
Range of OPC
The brightness level range of the OPC sensor's automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of e16 and a minimum of f16.
Selected item Description f15 through e16 f16 through e15
Fine Motion Advanced
Use Fine Motion Advanced to view fast-action video more clearly.
Selected item On Off Description For obtaining a clearer image Normal image
Max. If this occurs turn the function "Off".
NOTE · The range of OPC settings are active only when the OPC is set to On. · The maximum setting cannot be set to a smaller number than the minimum setting. · The minimum setting cannot be set to a bigger number than the maximum setting. · Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small.
27
Basic adjustment settings
Sound adjustment
You can adjust the sound quality to your preference with the following settings.
Surround
Surround function allows you to enjoy realistic "live" sound.
1 2
Press MENU to display the MENU screen, and then press c/d to select "Audio". Press a/b to select "Surround", and then press ENTER.
Audio Power Control
Treble
[ 0] [ 0] [ 0]
a15 a15 L
b15 b15 R [Off]
1
Press MENU to display the MENU screen, and then press c/d to select "Audio".
Audio Power Control
Bass Balance Surround Reset
Treble Bass Balance Surround Reset
[ 0] [ 0] [ 0]
a15 a15 L
b15 b15 R [Off]
3 4
Press c/d to select "On", and then press ENTER. Press MENU to exit.
2 3
Press a/b to select a specific adjustment item. Press c/d to adjust the item to the desired level.
cbutton For weaker treble For weaker bass dbutton For stronger treble For stronger bass
NOTE · You can choose Surround by pressing SURROUND on the remote control unit. (See page 19. ) · Audio menu is grayed out when Output Select is set to "Variable". In this case, please refer to the operation manual of your DVD player.
Selected item Treble Bass Balance
Decrease audio from Decrease audio from the left speaker the right speaker
4
Press MENU to exit.
NOTE · Audio menu is grayed out when Output Select is set to "Variable". · For resetting all Audio adjustment items to the factory preset values, press a/b to select "Reset", press ENTER, press c/d to select "Yes", and then press ENTER.
28
Basic adjustment settings
Power Control
Power control setting allows you to save energy. No signal off When set to "Enable", the power will automatically shut down if there is no signal for 15 minutes.
Digital Setup
This setting allows you to optimize the settings of Digital broadcasting.
Audio Setup
You can output digital audio to an AV amplifier or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUTPUT terminal on the TV. Please select an audio output format compatible with the audio format of the program you are watching and the equipment connected.
1 2 3
Press MENU to display the MENU screen, and then press c/d to select "Power Control". Press c/d to select "Enable", and then press ENTER.
1 2
Press MENU to display the MENU screen, and then press c/d to select "Digital Setup". Press a/b to select "PCM" or "Dolby Digital", and then press ENTER.
Enable
Disable
3
· Five minutes before the power shuts down, the remaining time displays every minute.
PCM
Dolby Digital
4
Press MENU to exit.
NOTE · "Disable" is the factory preset value. · When a TV program finishes, this function may not operate.
Selected item PCM
Description The optical output terminal outputs audio signal in PCM form. If your digital audio system does not support Dolby Digital, select "PCM". The optical output terminal outputs audio signal in Dolby Digital form. It reproduces sound from surround program of digital.
No operation off When set to "Enable", the power will automatically shut down if there is no operation for 3 hours.
Dolby Digital
1 2 3
Press MENU to display the MENU screen, and then press c/d to select "Power Control". Press a/b to select "No Operation Off", and then press ENTER. [. . . ] · As long as that from which the parameter (g) in the table is a numerical value, it may write anything.
55
Appendix
Specifications
Item LCD panel Number of dots TV-standard (CCIR) TV Function Receiving Channel Model: LC-65D93U 65o Advanced Super View & BLACK TFT LCD 6, 220, 800 dots (1920 g 1080 g 3 dots) American TV Standard ATSC/NTSC System VHF 2-13ch, UHF 14-69ch VHF/UHF 1-135ch (non-scrambled channel only) CATV Digital Terrestrial 2-69ch Broadcast (8VSB) Digital cable*1 1-135ch (non-scrambled channel only) (64/256 QAM) Audio multiplex Backlight Audio out Terminals Rear INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT 5 INPUT 6 INPUT 7 ANTENNA DIGITAL AUDIO OUTPUT OUTPUT OSD language Power Requirement Power Consumption Weight Dimension* (W g H g D)
2
BTSC System 60, 000 hours (at Backlight Standard position) 15W g 2 AV in, COMPONENT in S-VIDEO in, AV in Audio in, COMPONENT in HDMI in with HDCP HDMI in with HDCP Audio in, HDMI in with HDCP Audio in, DVI-I in with HDCP 75 q Unbalance, F Type g 1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE) Optical Digital audio output g 1 (PCM/Dolby Digital) Audio out English/French/Spanish AC 120 V, 60 Hz 475 W (0. 2 W Standby with AC 120V) 143. 3 lbs. /65. 0 kg 130. 1 lbs. /59. 0 kg 6211/64 g 4113/16 g 157/8 inch 6211/64 g 3843/64 g 457/64 inch e32°F to e104°F (0°C to e40°C)
TV e stand TV only TV e stand TV only
Operating temperature
1
* Emergency alert messages via Cable are unreceivable. · As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
Optional accessory
The listed optional accessory is available for the Liquid Crystal Television. [. . . ]