Detailed instructions for use are in the User's Guide.
[. . . ] Important Information Setup & Connections Operation Useful Features
Maintenance & Troubleshooting
Appendix
OPERATION MANUAL
PG-C30XU
MODEL
LCD PROJECTOR
Before using the LCD projector, please read this operation manual carefully.
Important Information
OPERATION MANUAL
IMPORTANT
For your assistance in reporting the loss or theft of your Color LCD Projector, please record the Serial Number located on the bottom of the projector and retain this information. Before recycling the packaging, please be sure that you have checked the contents of the carton thoroughly against the list of "Supplied Accessories" on page 10.
ENGLISH Model No. : PG-C30XU Serial No. :
There are two important reasons for prompt warranty registration of your new SHARP LCD Projector, using the REGISTRATION CARD packed with the projector. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service and labor warranty applicable to your purchase. CONSUMER PRODUCT SAFETY ACT To ensure that you will promptly receive any safety notification of inspection, modification, or recall that SHARP may be required to give under the 1972 Consumer Product Safety Act, PLEASE READ CAREFULLY THE IMPORTANT "LIMITED WARRANTY" CLAUSE. [. . . ] Depending on the input signal, you can choose NORMAL, FIT TO SCREEN, DOT BY DOT, WIDE or NORMAL (WIDE) image. Each time RESIZE is pressed, the picture mode changes as shown below.
1 2
COMPUTER
EXAMPLE
SVGA (800 XGA (1024 UXGA (1600 SXGA (1280
2 To return to the standard image, press UNDO while "RESIZE" is displayed on the screen.
4:3 aspect ratio Other aspect ratios
600) 768) 1200) 1024)
NORMAL 1024 768 1024 768 1024 768 960 768
FIT TO SCREEN 1024 768
DOT BY DOT 800 600 1024 768 1600 1200 1280 1024
Input Signal
NORMAL
Output screen image FIT TO SCREEN
DOT BY DOT
4:3 aspect ratio
Other aspect ratios
VIDEO/DTV
EXAMPLE
Useful Features
4:3 aspect ratio 480I/P, NTSC, PAL, SECAM 16:9 aspect ratio, 720P, 1080i
4:3 Letterbox Squeeze 480I/P, 720P, 1080i
NORMAL 1024 768 1024 768
WIDE 1024 576* 1024 576* 1024 576* 1024 576*
NORMAL (WIDE) 768 576* 768 576* 768 576*
*The digital image shift function can be used with these picture display modes. Input Signal Output screen image WIDE
NORMAL
NORMAL (WIDE)
4:3 aspect ratio
480I/P, NTSC, PAL, SECAM
Letterbox
Squeeze
720P, 1080i
16:9 aspect ratio
E-36
Black Screen Function
Projector
BLACK SCREEN
Remote control
This function can be used to superimpose a black screen over the projected image.
Blacking out the Projected Image
Press BLACK SCREEN. The screen turns black and "BLACK SCREEN" is displayed on the screen. To return to the original projected image, press BLACK SCREEN again.
MOUSE ADJ.
button 1, 5 2, 3, 4
· To use the remote control to operate this function, slide the MOUSE/ADJUSTMENT switch to the MOUSE position before pressing BLACK SCREEN.
Projected Image
Turning off the On-screen Display
The On-screen Display ("BLACK SCREEN") that appears during black screen can be turned off. When "BLK SCRN Disp" is set to " " in the GUI menu, "BLACK SCREEN" will not be displayed during function. position. )
MOUSE ADJ.
sg
(GUI) On-screen Display
1 Press MENU. 4 Press ß/© to select " " to turn on or " " to turn off the On-screen Display. 5 To exit from the GUI, press MENU.
Useful Features
On-screen Display Override Function
Projector Remote control This function allows you to turn off the on-screen messages that appear during input select. Once "OSD Display" is set to " " in the GUI menu, the on-screen messages will not appear when INPUT is pressed. (GUI) On-screen Display 4 Press ß/© to select " " to turn on or " " to turn off the On-screen Display. 5 To exit from the GUI, press MENU.
MOUSE ADJ.
1, 5 2, 3, 4
E-37
Selecting a Background Image
Projector Remote control This function allows you to select the image displayed when no signal is being sent to the projector.
Description of Background Images
Selected item Background image SHARP default image User customized image (i. e. company logo) Blue screen Black screen
MOUSE ADJ.
1, 6 2, 3, 4 5
Sharp Custom Blue None
(Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ. 4 Press / to select the background image you want to display on the screen. 6 To exit from the GUI, press MENU.
· By selecting "Custom", the projector can display a custom image (i. e. The custom image must be a 256-color BMP file with a picture size no larger than 1, 024 768 pixels. Please see the Sharp Advanced Presentation Software operation manual for how to save (or change) a custom image.
Selecting a Startup Image
Projector Remote control · This function allows you to specify the image to be displayed upon the projector's startup. your company logo) can be uploaded to the projector via an RS-232C cable. See page 14 in this operation manual, and also the supplied Sharp Advanced Presentation Software operation manual for detailed instructions.
Useful Features
1, 6 2, 3, 4 5
Description of Startup Images
Selected item Sharp Custom None Startup image SHARP default image User customized image (i. e. company logo) Black screen
MOUSE ADJ.
(Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ. 4 Press / to select the startup image you want to display on the screen. 6 To exit from the GUI, press MENU.
· By selecting "Custom", the projector can display a custom image (i. e. [. . . ] 10
F
Fit to screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Foot release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 FREEZE button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
T
TEMPERATURE WARNING indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]