Detailed instructions for use are in the User's Guide.
[. . . ] POS TERMINAL
MODEL
UP-700
INSTRUCTION MANUAL
CAUTION: The drawer unit should be securely fitted to the supporting platform to avoid instability when the drawers are open. CAUTION: The socket-outlet shall be installed near the equipment and shall be easily accessible. VORSICHT: Die Netzsteckdose mu nahe dem Gert angebracht und leicht zugnglich sein. ATTENTION: La prise de courant murale devra tre installe proximit de l'quipement et devra tre facilement accessible. [. . . ] Paste (from the buffer) : Move the cursor to the target text line to paste, and press . key.
109
s Entering character codes
Numerals, letters and symbols are programmable by entering the key and character codes. Use the following procedure with the cursor placed at the position where you want to enter characters:
Character code:
XXX
XXX : character code (3 digits)
032
033
034
035
036
037
038
039
040
041
042
043
044
045
046
047
032 - 047
048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063
048 - 063
064 065 066 067 068 069 070 071 072 073 074 075 076 077 078 079
064 - 079
080 081 082 083 084 085 086 087 088 089 090 091 092 093 094 095
080 - 095
096 097 098 099 100 101 102 103 104 105 106 107 108 109 110 111
096 - 111
112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127
112 - 127
128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143
128 - 143
144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159
144 - 159
160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175
160 - 175
176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191
176 - 191
192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207
192 - 207
208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223
208 - 223
224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239
224 - 239
240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255
240 - 255 *(DC) : Double-size character code _(095) : Line feed code : Shaded characters can not be printed by the built-in printer (display only).
(DC)
110
11 Programming
Basic Instructions
PGM1 MODE PGM2 MODE
This chapter explains how to program various items. Before you start programming, turn the mode switch to PGM1 or PGM2 depending on the item you are going to program.
This section illustrates the basic programming by using an example of programming for departments.
s Programming screen
Opening screen: When you turn the mode key to PGM1 or PGM2, your display will show a programming opening screen corresponding to the mode you selected.
Mode you are in Programming menu: Use the cursor keys or numeric key to select an option, and press the E key.
Numeric entry and status information area (In case of PGM2)
Code selecting screen (Dept. PLU/EAN, Customer): Code title Code number and its description (In case of PLU/EAN and customer, two lines are used for one code, upper line - code, lower line - description. ) Use the cursor keys or numeric keys to select an option, and press the E key. (When you select the last item, the screen goes to the selected option screen without pressing the E key. ) Numeric entry and status information area Programming screen: Selected menu message Setting items: Use the cursor keys to select an item. Numeric entry: Use numeric keys Character entry: Use character keys Selective entry: Press . key to toggle options and press the E key to select it, or press the s key to show the option list. Use the cursor keys to move the cursor and press the E key to select it.
111
s Programming example
The following example shows how to program 2. 00 for the unit price, "ABCDE" for the description, and "taxable 2 yes" for department 1.
Procedure
1.
In the PGM2 MODE screen, select "2 SETTING" by using the or key and press the E key. The SETTING screen will appear.
NOTE
E
C
You can also select "2 SETTING" by using numeric key "2, " then press the E key. If you return to the previous screen, press the C key.
2.
Select "1 ARTICLE. " The ARTICLE screen will appear.
NOTE
The arrow mark in the upper-right corner of the window shows that the window contains more options than are now on the screen. To scroll the window, press the key.
E
C
To return to the previous page, press the key.
3.
Select "1 DEPT. " The DEPT screen will appear, listing programmable departments.
E
C 4.
Select "01" to program for department 1. The "01" window will appear.
E
C
112
5.
On the first page of the "01" window, program the unit price and description as follows:
NOTE
There are three entry patterns for the programming: the numeric entry, character entry, and selective entry.
E
C
Move the cursor to "PRICE, " enter "200" by using numeric keys, then press the E key. Numeric entry Move the cursor to "DESCRIPTION, " enter "ABCDE" by using character keys, then press the E key. Character entry If you want to clear setting, press the L key before you press the E key.
6.
Press the key to go to the next page of the "01" window, then program the machine to set "taxable 2" as follows: Move the cursor to "TAXABLE 2, " press the . Pressing the s key displays all pertinent options.
7.
Select one of the following actions: To cancel the programming, press the C key. To return to the "01" window, press the key.
The following sections describe how to program each item which is contained in a programming group.
113
Article Programming
Use the following procedure to select any option included in the article programming group: Procedure
1
From the SETTING menu, select "1 ARTICLE. " The ARTICLE window will appear.
E
C 2.
Select any option from the following options list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 DEPT: PLU/EAN: DYNAMIC EAN: PLU RANGE: PLU STOCK: PLU MENU KEY: COMBO MEAL: LINK PLU TABLE: CONDIMENT TBL. : PROMOTION TBL. : SCALE TABLE: EAN NON-PLU: PRESS CODE: EAN DELETE: Departments PLUs/EANs Dynamic EANs A range of PLUs PLU/EAN stock quantity PLU menu key Combo meal Link PLU table Condiment table Promotion table Scale table EAN Non-PLU type code format EAN press code format EAN record delete period
The screen continues.
The following illustration shows those options included in the article programming group.
1 ARTICLE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 DEPT PLU/EAN DYNAMIC EAN PLU RANGE PLU STOCK PLU MENU KEY COMBO MEAL LINK PLU TABLE CONDIMENT TBL. SCALE TABLE EAN NON-PLU PRESS CODE EAN DELETE
See "Department" on page 115. See "EAN delete" on page 127.
114
s Department
Your POS terminal is equipped with 10 standard departments, and can be equipped with a maximum of 99 departments. Program each item as follows:
NOTE
For more information about the entry patterns, see the "Basic Instructions" section. (Use the numeric entry) 01-09: Plus department 10: Minus department 11: Plus hash department 12: Minus hash department 13: Plus bottle return department 14: Minus bottle return department 15-17: Non-turnover 1-3 If the "Hash", "Bottle return" and "Non-turnover" functions are disabled, you are not allowed to select any hash, bottle return or nonturnover department.
w
The screen continues.
DPT. ITEM VP (Use the selective entry) COMPUL. : Makes item validation printing compulsory. [. . . ] However, when power failure is encountered or the machine becomes out of order, slide the lever located on the machine bottom toward the rear. (See the figure below. ) The drawer will not open, if it is locked with a drawer lock key.
Lever
195
Before Calling for Service
The malfunctions shown in the left-hand column below, labeled "Fault, " do not necessarily indicate functional faults of the machine. It is therefore advisable to refer to the "Checking" shown in the right-hand column before calling for service. Fault The display won't be illuminated even when the mode switch is turned to any other position than " ". [. . . ]