User manual SHERWOOD CD-5505
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHERWOOD CD-5505. We hope that this SHERWOOD CD-5505 user guide will be useful to you.
Manual abstract: user guide SHERWOOD CD-5505
Detailed instructions for use are in the User's Guide.
[. . . ] This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] If not, it must be set to your voltage in accordance with the following direction. AC voltage selector switch
AC 110 V
AC 220 V
Move switch lever to match your line voltage with a small screwdriver or other pointed tool.
3
ENGLISH
FOR YOUR SAFETY
CONTENTS Introduction
Introduction
ENGLISH
UNPACKING AND INSTALLATION READ THIS BEFORE OPERATING YOUR UNIT 2 3 5 6 10
System Connections Controls Before Operation Operations
PLAYING A DISC SEARCH AND SKIP PLAY PLAYING A DISC IN RANDOM SEQUENCE (RANDOM PLAY) PLAYING THE FIRST 10 SECONDS OF EACH TRACK (INTROSCAN PLAY) (ONLY FOR CD-5505R) REPEAT PLAY PLAYING TRACKS IN ANY SEQUENCE (PROGRAMMED PLAY) EDITING FOR RECORDING SELECTING A BRIGHTNESS OF THE DISPLAY (ONLY FOR CD-5505R) SELECTING A TIME DISPLAY USING THE HEADPHONES
11 12 12 12 13 14 16 18 19 19 20 21
Troubleshooting Guide Specifications
4
System Connections
ENGLISH
Do not plug the AC input cord into the AC outlet when making connections. Be sure to connect the white plugs to the L(Left) and the red plugs to the R(Right) jacks when making connections with the supplied cords. Refer to the connecting diagram in the operating instructions of AMPLIFIER/RECEIVER.
OUTPUT
DIGI LINK
AC INPUT 230V~50Hz 12W
CAUTION: TO PREVENT ELECTRIC
SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER-SERVICING TO QUALIFIED SERVICE PERSONNEL.
MODEL NO. CD-5505R
L
COMPACT DISC PLAYER
DESIGNED IN USA ASSEMBLED IN KOREA
R
SER. NO.
DIGITAL OUTPUT
AMPLIFIER/RECEIVER
CD
STEREO INTEGRATED AMPLIFIER AX-5090R
POWER
ON/OFF
DIGI LINK
L
REMOTE SENSOR
CD
TUNER
TAPE 1/MD
PHONO
TAPE 2 MONITER
VOLUME SPEAKER A
R
B PHONES -10
BASS
TREBLE
BALANCE DIRECT
LOUDNESS
10+
-10
10+
LEFT
RIGHT
MIN
MAX
OUTPUT JACKS Connect these jacks to the CD(or AUX) input jacks of your amplifier such as AX-5090R or receiver. DIGI LINK III JACKS Connect this jack to the DIGI LINK jack of Sherwood amplifier such as AX-5090R bearing the DIGI LINK III or II mark to control this unit remotely by DIGI LINK System. AC INPUT CORD Plug this cord into a house hold AC outlet or the switched AC outlet of amplifier such as AX-5090R. DIGITAL OUTPUT
Digital output should be connected to digital input of amplifier or receiver to enjoy live digital sound. You can record digital sound by connecting digital input of Mini Disc Recorder to this jack. SIZE
POWER
ON/OFF
PHONES
1
2
3
4
5
REPEAT
R
6 7 8 9 0 RANDOM
Use the remote control unit within a range of
about 7 meters (23 feet) and angles of up to 30 degrees aiming at the remote sensor.
LOADING BATTERIES (ONLY FOR CD-5505R)
1
Remove the cover.
2
Load two size "AA" batteries matching the polarity.
Remove the batteries when they are not used for a long time. Do not use the rechargeable batteries (Ni-Cd type).
9
ENGLISH
Before Operation
Only compact discs bearing this mark can be reproduced. Notes Do not expose discs to direct sunlight, high humidity or high temperature for a long time. When loading or unloading a disc in the disc tray, always place it with the printed side up.
Printed side
ENGLISH
In handling a disc, hold it carefully with edges.
Do not stick paper or write anything on the printed surface.
The DTS logo on the front means that the CD encoded with the DTS signal can be heard in DTS mode when this digital out is connected to the digital input of the amplifier with the DTS decoder, etc. .
Fingermarks and dust on the recorded surface should be carefully wiped off with a soft cloth. "DTS" and "DTS Digital Surround" are trademarks of Digital Theater Systems, Inc.
Always keep the discs in their cases after use to protect them from dust and scratches.
10
Operations
PLAYING A DISC
ENGLISH
1
Turn the power on.
2
Load a disc and close the tray.
POWER WER
ON/OFF
" " indicator lights up when the number of tracks is more than 14. When the CD door is kept opened, if it elapsed over 60 seconds, the CD door will be closed automatically. To interrupt play temporarily.
3
4
or
or
" " indicator lights up. The unit plays from the first track to the last track.
" " indicator lights up. Press this button again to restart play.
5
To stop play.
Music calendar
or Stop mode
Total tracks Total playing time
11
SEARCH AND SKIP PLAY
Searching for a passage during play Selecting a track during play Press the button momentarily and repeatedly until the desired track is selected.
ENGLISH
Press and hold down these buttons until the desired passage is reached.
or or
When using the NUMERIC buttons on the remote control or on the front pannel. Example) When selecting "9" : 9 When selecting "22" : 2 2
within 2 sec.
PLAYING A DISC IN RANDOM SEQUENCE (RANDOM PLAY)
or
"RANDOM" indicator lights up. The unit automatically selects and plays tracks on the disc in random sequence. [. . . ] (refer to the DD-5090C's operating instruction)
17
ENGLISH
1
In the stop mode, select the manual edit mode.
2
Select the tape length like the auto edit.
Checking the edited tracks In the edit mode, check as you do the programmed tracks. (refer to "Checking the programmed tracks" on page 15)
ENGLISH
PROG/REV PROG/REV
or
Clearing all edited tracks In the edit mode, press the STOP/CLEAR button for more than 4 seconds or open the tray.
or
or
In the manual edit mode only, you can clear or rectify the edited tracks like "Rectifying any wrong programmed tracks" or "Clearing the programmed tracks" on page 15.
SELECTING A BRIGHTNESS OF THE DISPLAY (ONLY FOR CD-5505R)
Each time this button is pressed, the brightness of the display changes as follows ; ON DIM OFF
In the display OFF mode, pressing any button will restore the display ON mode.
18
SELECTING A TIME DISPLAY
Elapsed playing time of the current track.
TIME TIME
or
Remaining playing time of the current track.
Remaining playing time of the disc.
During random play, etc. , the time display may show "---:--". When a track of which numer is greater than 30 is programmed, edited or being played, the time display may show "---:--".
USING THE HEADPHONES
For private listening, insert a plug of the headphone into the PHONES jack.
19
ENGLISH
Each time this button is pressed during play, time display changes as follows ;
Troubleshooting Guide
If your unit does not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or our service organization.
ENGLISH
PROBLEM
No power
POSSIBLE CAUSE
The AC input cord is disconnected. Defective or deeply scratched disc.
REMEDY
Connect the cord securely. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SHERWOOD CD-5505
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHERWOOD CD-5505 will begin.