User manual SIEMENS 4010 MICRO

[. . . ] s Be inspired Operating instructions and safety precautions ! General Brief overview of the handset Status LED (light-emitting diode) lights up during a call; flashes at: ­ Incoming call ­ New messages ­ Alarm call, appointments, anniversaries Reception strength Control key Talk key ­ Accept call ­ Dial number ­ Switch from handsfree talking to handset Open the directory Key 1 Hold down to select Mailbox Asterisk key Hold down to activate and deactivate the ringer Keypad protection On/off hold key down!Display (display field) Charging status empty ull flashes: Battery low Current functions and display keys With the display keys, you have access to the current functions. End call and On/ Off key ­ End call ­ Cancelling function ­ One menu level back (press briefly) ­ Return to idle state (hold down) ­ Handset on/off (hold key down) Annabella 19. 07 . 01 13:13 W * $ f Caller list Access to message lists Select Services key Microphone ­ Open network access list: press briefly!MP3 player Interaction between control key and display keys Display keys With the display keys you can carry out functions that can also be partly controlled with the control key. [. . . ] The SMS centre automatically enters your telephone number as the sender address. If you are called while writing an SMS the SMS will be copied to the outgoing list. You can accept the incoming call and go on writing the SMS afterwards. During the transmission of an SMS the following message is displayed on all handsets: "SMS is being transferred". Text messages that could not be sent are copied to the incoming list and are assigned an error status (see page 57). Settings and stored SMS messages are not lost in the event of a power failure. Contact your service provider if you need answers to the following questions: G G What are the charges for sending and, where applicable, receiving an SMS?To which mobile telephone operators can I transmit SMS messages and from which mobile telephone operators can I receive SMS messages? * The "+" character cannot be entered. (At the time of going to print it was not possible tosend SMS internationally!) 51 Text messages (SMS) Press keys: Incoming list Reading and deleting received SMS messages The status LED flashes on all handsets to signal new text messages (SMS). Date and time are specified for each SMS received (as set in the telephone, see page 13). The SMS messages are sorted in chronological order. The first ring tone is suppressed in the case of an incoming text message (SMS). This allows your Gigaset to distinguish between text messages (SMS) and calls. ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Text Message 5HDG New text messages appear before old text messages. Open the menu Select the text message. ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Incoming Open the incoming list. 4 ----------Text Message--------Incoming 02/04 Outgoing Service Centr. 1 --------------Incoming------------New SMS 1/2 08912345678 12. 07. 00 11:33 Total old SMS messages Total new SMS messages Total new SMS messages Number of the new SMS 'HOHWH Read the SMS Delete the SMS. 5HDG 52 or Scroll to the next or previous SMS. 'HOHWH Text messages (SMS) Press keys: When it has been read a new SMS receives the status "old SMS" . If your incoming memory is full you will see the message:"SMS lists are full. You can store a total of 13 SMS messages (depending on the country). Options while reading After reading an SMS you can immediately reply to it or you can access other functions. 4* + Hi Peter, can't come today because I have a dental appointment. G G G G G Open the menu, then select the option you want. Write Message Reply: Yes/No Edit Text Forward Text Copy to Directory Write a new message as a reply. Copy the telephone number of the SMS to the directory. 53 Text messages (SMS) Press keys: Outgoing list All SMS messages that have been stored are displayed in the outgoing list. After transmission, these messages remain in the list until manually deleted. Messages that were already released for transmission cannot be retrieved; they are not displayed in the outgoing list. ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Text Message Reading, editing, sending or deleting stored SMS messages Open the menu. Select the text message. ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Outgoing Open the outgoing list. 4 ----------Text Message--------Incoming 02/04 Outgoing Service Centr. 1 --------------Outgoing------------Saved 1/2 08912345678 12. 07. 00 11:33 Total stored SMS messages First SMS message 'HOHWH 'HOHWH or Delete the SMS 5HDG 5HDG C Display the text of the SMS. When reading a stored SMS you can: Open the menu, then select the option you want. G G Write Message Edit Text Write and send a new SMS. Edit and send a stored SMS. 54 Text messages (SMS) Press keys: SMS centre To send and receive SMSs you need the telephone number of the service provider's SMS centre. Important: the telephone number of SMS Centre 1 is always used when sending an SMS. The telephone number of SMS Centre 2 permits the receipt of SMS messages from a third-party provider. SMS Centre Telephone number for fixed network SMS SMS Centre 1 SMS Centre 2 Deactivating the SMS function You can deactivate the SMS function by deleting the service provider's telephone numbers in the SMS Centre 1 and SMS Centre 2 fields. The following section (see page 56) explains the meaning of SMS Centre 1 and SMS Centre 2 in greater detail. 55 Text messages (SMS) Press keys: Changing the telephone number of an SMS centre You can change the telephone number of the SMS centre for receiving/transmitting SMSs. Please inform yourself about special features and services offered by the SMS service provider before you change the preset numbers. G G ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Text Message Service Centr. 1 Service Centr. 1: You can use the SMS centre number for sending and receiving SMSs. [. . . ] E. g. : === 4-4 to set the date. + + Main menu when the telephone is idle, press: 1-1 1-2 1-3 1-4 1-5 2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8 3-1 3-2 4-1 4-2 4-3 4-4 5-1 5-2 5-3 5-4 6-1 6-2 6-3 6-4 7-1 7-2 7-3 7-4 7-5 Write Message Incoming Outgoing Service Centr. 1 Service Centr. 2 Withhold No. Call Waiting Ringback Off Call Divert Call Barring Alarm call Bar connection Call protection Room Monitor. Alarm Clock Missed Dates Date/Time Handset Volume Ringer Settings Advisory Tones Silent alert Last Call All Calls Per Handset Settings Auto Answer Language Register H/Set Select Base Reset Handset [entry] 1 Text Message 2 Select Services 3 Family/Fun 4 Calendar/Clock [entry] [entry] [entry] [entry] [entry] [entry] [entry] 5 Sound Settings 6 Call Charges [entry] 7 H/Set Settings [list] [list] [list] 97 Menu table 8 Base Settings 8-2 8-3 8-4 System-PIN Base Reset Add. Features [entry] 8-4-1 Dialling Mode 8-4-1-1 8-4-1-2 Tone Pulse 8-4-2 TBR 8-4-2-1 80 ms 8-4-2-[. . . ] [etc. [. . . ]