User manual SIEMENS C81

[. . . ] OHG under trademark license of Siemens AG www. BenQ-Siemens. com/c81 C81 Table of Contents Safety precautions . . . . . . . . . . . . . . . . . . . . . The complete version can be found on the Internet at this address: www. BenQ-Siemens. com/c81 2 Safety precautions Safety precautions Information for parents Please read the operating instructions and safety precautions carefully before use. Explain the content and the hazards associated with using the phone to your children. Remember to comply with legal requirements and local restrictions when using the phone. [. . . ] If no name is given, the phone uses the non-changeable device address. Visib. to others Make settings to specify how your phone should "act" when in contact with other BT devices. This means (if "visible"), for example, that the device address or the BT name of your phone is shown to other BT devices if they request this in order to receive or send data. · Not visible Your phone is not "visible" to other BT devices. Known devices such as the Bluetooth Headset/Car Kit continue operating. EGPRS info Display information on connection status. Bluetooth® (BT) Activate/deactivate Bluetooth, give your phone a Bluetooth name, and manage the list of known Bluetooth devices. My BT name: Give the phone a name the first time it is switched on. ì Search Specify which BT devices are to be searched for. 40 Settings · Auto mode Your phone is "visible" to other BT devices for five minutes. · Always visible Your phone is always "visible" to other BT devices. These devices can create a connection to your phone and be added to the known device list if necessary. BT audiostream When a Bluetooth headset is used, all audio signals are transmitted to this exclusively. © Device visible to others. Fax/data Send voice/fax b Set this function on the phone before transmission so that you can switch from voice mode to fax mode. fax/data b The call is signalled by a special ringtone and the type of call (fax or data) is displayed. Now start the communication program in your PC to receive the fax/data. Online settings Default setting and activation of the connection profiles for data transmission. The phone default setting varies from service provider to service provider. Consult your service provider or go to this address on the Internet for more information www. BenQ-Siemens. com/mobilesettings Settings 41 Shortcuts Soft keys Navigation keys The navigation key can be assigned a function for three directions (only effective in standby mode). The downwards movement is assigned to opening contacts and cannot be modified. í ¢T¢Shortcuts You can assign one function to the right softkey. I ñ I ì §Internet§ Select key. Confirm. Number keys Number keys 2 to 9 can be used as speed dialling numbers or as fast access to functions. Assigning numbers or functions Apply The "Internet" is just used as an example here. The application is started. I ñ I ì Select the key. Confirm selection. Additional information The service provider may have already assigned functions to all the keys (e. g. access to "SIM services" or direct call-up of the Internet portal). It may not be possible to modify this key assignment. Show functions Show the functions set for the number keys. 42 Settings All calls All calls are diverted. Call settings Hide ID b í ¢T¢Call settings If activated, your phone number will not appear on the other party's display (depending on the service providers). b Ç Symbol in the top line of display in standby mode. Other possibilities for divert: Not reachable, No reply, Busy, Receiving fax, Receiving data Call waiting If you are registered for this service, you can check whether it is set and you can activate/deactivate it. b Call screening Only calls from phone numbers that are in contacts or in a group are signalled audibly. Other calls are only displayed. Divert You can specify when calls should be diverted to your mailbox or other phone numbers. [. . . ] YOU ACKNOWLEDGE THE LICENSED SOFTWARE IS PROVIDED "AS IS" AND NEITHER BENQ NOR ANY OF ITS LICENSORS MAKE ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR Licence Agreement LIABILITY, OR ARISING OUT OF THE USE OF OR INABILITY TO USE THE LICENSED SOFTWARE, EVEN IF BENQ IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE LIMITATION OF LIABILITY SHALL NOT APPLY IF AND TO THE EXTENT BENQ´s LIABILITY IS MANDATORY UNDER THE APPLICABLE LAW E. G. ACCORDING TO PRODUCT LIABILITY LAW OR IN THE EVENT OF INTENTIONAL MISCONDUCT, PERSONAL INJURY OR DEATH. BenQ and its Licensors have no obligation to furnish You with technical support unless separately agreed in writing between You and BenQ or the applicable Licensor. [. . . ]