User manual SIEMENS GIGASET A200

[. . . ] Gigaset A200 / IM eng / A31008-A200-J101-2-7619 / cover_I. fm / 12. 06. 2003 s Be inspired Gigaset A 200 A 200 Duo Gigaset A200 / IM eng / A31008-A200-J101-2-7619 / cover_II. fm / 12. 06. 2003 Brief overview Brief overview Internal number of handset Time Caller list Access to Answering machine/mail box Caller list Redial Internal list key Talk key Accept call Start dialling = flat 1 ÞÜ INTMENU 22-35 V Battery charging status U full flashing: battery almost empty Display Menu keys Activate current functions in display Star key Ringer on/off (press for approx. 2 secs) End call and on/off key End call End function Back one menu level (press briefly) Back to standby (press for approx. 2 secs) key Enquiry (Flash) Enter dial pause (hold down) Microphone Select Services key Open network access list II Gigaset A200 / IM eng / A31008-A200-J101-2-7619 / A_200IVZ. fm / 12. 06. 2003 Contents Contents Brief overview . Step 3: Registering the handset with the base station and charging the batteries . [. . . ] then 18 Gigaset A200 / IM eng / A31008-A200-J101-2-7619 / Directories. fm / 12. 06. 2003 Using the directory and other lists Delete complete caller list Open caller list (see above). Then: [_______________] MENU [__________] [______________________________________________] [__________] DELETE LIST OK Press display key to open menu. Long press (return to idle mode). Establish date and time of a call You can check in the caller list to see when a phone call was received. Then: [_______________] MENU [__________] [______________________________________________] [__________] TIME OK Press display key to open menu. Long press (return to idle mode). Example: 23/12 15-56: The call came on 23. 12. If the clock is set on a 12-hour display, an "A" behind the time indicates the first half of the day and a "P" the second half (for example: "03-56P"). 19 Gigaset A200 / IM eng / A31008-A200-J101-2-7619 / registration. fm / 12. 06. 2003 Registering and de-registering handsets Registering and de-registering handsets You can register up to six handsets with your base station. Registration of a Gigaset A 2 handset that has not yet been registered with a base station takes place automatically. You must register manually all handsets from the 1000, 2000, 3000 and 4000 Gigaset ranges, as well as C1, C2 and S1 Gigaset handsets and those from other manufacturers. Automatic registration: Gigaset A 2 handset Automatic registration with a base station is only possible for those handsets supplied with it that have never been registered before. For first-time registration, place your handset with its display to the front in the base station. The registration process lasts about a minute, with all symbols flashing in the display. The handset automatically receives the first unallocated internal number (1-6). After successful registration this number is shown in the top left of the display, e. g. If the internal numbers 1 to 6 have already been allocated (if six handsets have already been registered with a handset), number 6 is de-registered and replaced. Manual registration: Gigaset A 2 handset You must activate manual registration of the handset at both the handset and the base station. 1. At the handset [_______________] MENU [__________] [______________________________________________] [__________] REGISTER HS OK [______] OK Press display key to open menu. Enter the system PIN for the base station (default setting: 0000) and confirm. During the following registration process, all symbols will flash in the display. 2. of entering the system PIN press the registration/paging key on the front of the base station for approx. After successful registration the handset is automatically allocated the next free number, as described in the section "Automatic registration" (see above). 20 Gigaset A200 / IM eng / A31008-A200-J101-2-7619 / registration. fm / 12. 06. 2003 Registering and de-registering handsets Specific registration: other handsets Handsets from the 1000, 2000, 3000 and 4000 Gigaset ranges, C1, C2 and S1 Gigaset handsets, as well as other GAP-capable handsets can be registered as follows: 1. At the handset Start the registration of your handset as described in the relevant operating manual. 2. At the base station Press the registration/paging key (page 20) on the front of the base station for approx. During registration the handset is automatically allocated the next free internal number (1­6). If all numbers are allocated, number 6 is overwritten. De-registering handsets. You can de-register any handset from another registered Gigaset A2 handset. [_______] INT [__________] [______________ ] MENU [__________] [______________________________________________] [__________] DE-REG H/SET OK [______] OK [______________________________________________] [__________] DE-REGISTER?Enter system PIN for the base station (default setting: 0000) and confirm. [. . . ] Long press (return to idle status). 29 Gigaset A200 / IM eng / A31008-A200-J101-2-7619 / appendix. fm / 12. 06. 2003 Appendix Changing pause after line seizure You can set the length of the pause that is inserted between pressing the talk key c and sending the phone number (default setting: 3 secs. ). [_______________] MENU Press display key to open menu. Enter number and confirm. [______] OK Changing pause after recall key (dialling pause) You can change the length of the dialling pause if your PABX requires this (refer to your PABX operating instructions). [_______________] MENU Press display key to open menu. To insert a dialling pause between a prefix and a phone number: After entering the prefix, hold down the S key for 2 seconds. Then enter the phone number. [______] OK i Other Settings Factory settings of handset Default settings Loudspeaker volume Ringer volume Ringtones Directory Redial list Caller list Network ccess list Automatic call acceptance Battery warning tone Display language 1 5 1 empty empty empty empty activated activated country specific Status after reset 1 5 1 unaffected empty unaffected unaffected activated activated country specific Description page 25 page 26 page 26 page 14 page 17 page 18 page 14 page 25 page 26 page 25, page 31 30 Gigaset A200 / IM eng / A31008-A200-J101-2-7619 / appendix. fm / 12. 06. 2003 Appendix Factory settings of base station Default settings System PIN Barge in Pause after R key Pause after line seizure Flash time Dialling procedure 0000 deactivated 800 ms 3s 250 ms MFV Status after reset unaffected deactivated 800 ms 3s 250 ms MFV Description page 27 page 24 page 30 page 30 page 29 page 29 Display language Setting the display language page 25. [. . . ]