User manual SIEMENS GIGASET A390

[. . . ] This can cause static. $ Only use the mains unit supplied. Contact with liquid ! Fit only the recommended, rechargeable batteries (¢ page 14), i. e. never use a conventional (non-rechargeable) battery or other battery types as this could result in significant health risks and personal injury. Be aware of the technical conditions in your particular environment, e. g. Do not use your phone in environments with a potential explosion hazard, e. g. [. . . ] INT 11:56 MENU Activating/deactivating the handset Press and hold the a key to activate or deactivate the handset. If you place a deactivated handset in the base station or charging cradle, it will automatically activate. Your phone is now ready for use. If you have any questions about using your phone, please read the tips on troublepage 14). shooting ("Questions and answers" ¢ 9 Making calls Making external calls and ending calls External calls are calls using the public telephone network. (Or you can first press and hold c to hear dial tone and then enter the number. ) During the call you can adjust the earpiece volume using t and set the volume with u. End the call/cancel dialling: Press the end call key a. Muting You can mute your handset when making external calls. Press the "Microphone off" key m during the call to activate/deactivate the function. ¢c. Using the directory and lists Directory To open the directory: press or h (A390 only). ters Accepting a call The handset indicates an incoming call by ringing and by a display on the screen. When Auto Answer is activated (see Menu page 15), simply remove the handtree set from the base station/charging cradle. In idle status, use t to activate the menu for setting the call volume and use u to set the volume. ¢ ¢ Saving the first number in the directory h ¢ New Entry?¢ OK ¢ ~ (enter number) ¢ OK ¢ ~ (enter name) ¢ OK Storing a number in the directory h ¢ MENU ¢ New Entry ¢ OK ¢ ~ (enter number) ¢ OK ¢ ~ (enter name) ¢ OK Selecting a directory entry Open the directory with h. You have the Use u to scroll through the entries until the required name is selected. following options: Calling Line Identification When you get a call, the caller's number will be displayed on your handset; the caller's name will be displayed if it is stored in the directory or if CNIP has been requested. Preconditions: 1 You have asked your network provider for the caller's number (CLIP) to be displayed on your handset screen. 2 The caller has asked the network provider for his number to be identified (CLI). Enter the first character of the name and scroll to the entry with u, if required. ® appears in the display if you have not requested Calling Line Identification, Withheld appears if the caller has withheld CLI, and Unavailable appears if the caller has not requested CLI. 10 Dialling with the directory h ¢ u (select entry) ¢ c Using other functions h ¢ u (select entry) ¢ MENU The following functions can be selected with u: New Entry Managing entries in the last number redial list c (press briefly) ¢ u (select entry) ¢ MENU You can select the following settings: Use Number Save new phone number. Copy to Dir. Delete Entry Delete List Show Number Display the phone Use Number Edit Entry Delete Entry Delete List Send List number. Old Call: entry already Manual registration of handsets to Gigaset A390 1. On the base station: press and hold the registration/paging key (¢ page 2) for min. of pressing the registration/ paging key MENU Settings OK Handset OK Register HS OK Enter the system PIN of the base station (default is 0000) OK. All old and new entries will be deleted. Returning a call from the calls list f ¢ CallsList 01+02 ¢ OK ¢ u (select entry) ¢ c ¢ ¢¢ ¢ ¢¢ ¢¢ Using key 1 for fast access to the network mailbox Simply press and hold key 1 on the handset and you will be connected directly to the network mailbox. 1 minute. ¢ De-registering handsets Handsets can only be de-registered by resetting the base station to its default settings. ting Locating a handset ("paging") You can locate your handset using the base station. [. . . ] To return to idle status: press the a key. Audio Settings Handset Volume Ringer Volume Ringer Melody 3 levels available 5 levels + "crescendo" available External Calls Internal Calls Alarm Clock Advis. Tones 10 melodies available 10 melodies available 10 melodies available Switch advisory tones (e. g. positive or negative confirmation, menu start, key tones, battery warning) on or off. Assign key 1 with network mailbox and enter the network mailbox number (in idle status, press and hold key 1 to dial). [. . . ]