User manual SIEMENS GIGASET A420

[. . . ] Gigaset A420-A420A / Grobritannien / A31008-M2402-L101-1-7619 / Bali. fm / 19. 04. 2012 1 Gigaset A420/A420A The handset at a glance 1 Charge status of the ?batteries 2 Answering machine icon (A420A only) 1 3 Signal strength 2 4 Display keys 3 5 End call key and On/Off key 6 Talk key/Handsfree key 7 Control key (p)?with an open connection: 7 switch from pulse dialling to 8 tone dialling (press briefly) 10 Key 0/recall key?9 Keypad lock on/off (press and hold); toggles between upper/ 10 lower case and digits; inserts a 11 dialling pause (press and hold) 12 12 Microphone Please note New messages in the calls list/ answering machine list/network mailbox list are indicated in the display by the message New messages, the left display key flashes (if set page 9). U INT 1 23. 04. [. . . ] Skipping forward from the last message jumps to the first message. Additional functions during message playback Press the display key Menu. Select the relevant function using q: Dial Number Continue Volume Copy to Dir. Delete all old messages. Deleting an individual message During playback: Press key Q or the display key . ?Deleting all old messages During playback or when paused: Menu q Delete all old OK (Confirm the security prompt) Accepting a call from the answering machine You can accept a call while the answering machine is recording it: Menu Accept OK You can also accept the call by: ?Removing the handset from the base station/charger (if Auto Answer is activated page 24) Please note When Call Screening is activated on the handset and the call can already be heard on the handset, you can only accept the call via Menu Accept OK. Pressing the talk key/handsfree key c only activates or deactivates the handsfree mode. Recording stops and you can speak to the caller. Template Bali, Version 1, 16. 02. 2012 Operating when on the move (remote operation) You can check your answering machine from any other telephone (hotel, pay phone etc. ). The phone you are using for remote operation has tone dialling (DTMF) i. e. , you hear different tones when you press the keys. Calling the answering machine and playing messages ~ (Dial your own number. ) When you hear your announcement, press 9 and enter the system PIN. A B 3 0 The following keys are used for operation: During the number/date/time announcement: Skip to the start of the previous message. ?During the message playback: Skip to the start of the current message. Delete current message. Gigaset A420-A420A / Grobritannien / A31008-M2402-L101-1-7619 / Bali. fm / 19. 04. 2012 13 Activating the answering machine ~ (Enter your own number and allow the phone to ring until you hear the message, "Please enter your PIN code. ")?The answering machine cannot be deactivated remotely. Network mailbox The network mailbox is the answering machine in your provider's telephone network. You cannot use the network mailbox unless you have requested it from your provider. In order to use the network mailbox quickly and easily via the network mailbox list ( page 9), the menu ( page 23) and to use fast access ( page 1), you will need to enter the number in your phone: Menu q Answer Machine OK q Net Mailbox ~ (enter number) OK Locating a handset (paging) You can locate your handset using the base station. Briefly press the registration/paging key on the base station ( page 1). All handsets will ring at the same time (paging), even if the ringers are switched off. Ending paging: Briefly press the registration/paging key on the base station ( page 1) or press the talk key c or the end call key a on the handset. Registering handsets manually You can register up to four handsets on your base station. Each additional handset must be registered on the base station in order for it to work properly!1) On the handset Menu q Settings OK q Handset OK q Register HS Enter the base station system PIN (default setting: 0000) OK Registering is displayed. 2) On the base station Within 60 seconds, press and hold the registration/paging key on the base station ( page 1) for approx. (A420A only: There is a tone played if the registration mode is activated. ) Registration takes approx. Once the registration process has been completed successfully, the display briefly shows HS registered and returns to idle status. [. . . ] following our environmental conscience in everything we do is of utmost importance to us. Learn more about our earth-friendly products and processes online at www. gigaset. com. Environmental management system Gigaset Communications GmbH is certified pursuant to the international standards ISO 14001 and ISO 9001. ISO 14001 (Environment): Certified since September 2007 by TV SD Management Service GmbH. ISO 9001 (Quality): Certified since 17/02/1994 by TV SD Management Service GmbH. Disposal Batteries should not be disposed of in general household waste. [. . . ]