User manual SIEMENS GIGASET C610 IP

[. . . ] Do not hold the rear of the handset to your ear when it is ringing or when speaker mode is activated. Your Gigaset is compatible with the majority of digital hearing aids on the market. The handset may cause interference in analogue hearing aids (humming or whistling) or cause them to overload. Do not use the phone in environments with a potential explosion hazard, e. [. . . ] The following handset menu can be used to make the entry: v (Press right on the control key) ¢ Ï ¢ System ¢ Local Network ¢ (enter system PIN if required) Version 5, 23. Fm / 4/20/11 Configuring the VoIP connection Instead of using the following procedure, you can also enter the VoIP access data and the assignment of the VoIP connection as send and receive connection using your PC (steps 7 to 12 ): > Launch the web browser on your PC. Com in the address field of the web browser and press the return key. To log in to the Web configurator you will need the system PIN for the telephone (default setting: 0000). A description of the Web configurator can be found in the long user guide (see enclosed CD) and in the Web configurator online help document. Prerequisite for the following steps: Before you can use VoIP to phone any other subscribers on the Internet, the fixed line network or the mobile phone network, you need a VoIP account. > Have your VoIP account data you received from your VoIP provider to hand. You will need: > Your registration name (login ID), your password and, if applicable (provider-dependent), a user name (often this is your VoIP phone number). Fm / 4/20/11 Configuring the VoIP connection 7 Starting the configuration process When your handset is sufficiently charged (approx. 20 minutes after you have placed it in the charger), the message key f on the handset flashes. If "New firmware available" is shown in the display, updated firmware is already available for your phone. 8 Starting the IP wizard IP Wizard IP Wizard This wizard helps you to configure an IP account and installation wizard?Start IP Ð No Yes OK > Press the key below §Yes§ on the display (= right display key). If the connection assistant does not start correctly, or if you cancel the connection assistant, you can start it via the following menu on the handset: p (press right) ¢ Ï ¢ Telephony ¢ VoIP Wizard Version 5, 23. Fm / 4/20/11 Configuring the VoIP connection Select IP Account IP 1 IP 2 IP 3 IP 4 IP 5 V ´ ´ ´ ´ ´ OK A list of all possible IP connections is shown in the display (IP 1 to IP 6). Back > If necessary, press down on the control key s to select a connection. Provided that your phone is set for auto-configuration (default setting), you will see the following display. If you have received a registration name/password and, if applicable, a user name: IP Wizard If you have received an auto-configuration code: ?No If your phone cannot establish a connection to the Internet, the message Internet connection not available is displayed. > Press the left display key §Info§ to display information about the possible causes of errors. > Press the right display key §OK§ to end the VoIP wizard and start the connection assistant (step Version 5, 23. Fm / 4/20/11 Configuring the VoIP connection 9 Entering an auto-configuration code > Enter your auto-configuration code using the keypad IP Wizard Activation code for autoconfiguration: (max. [. . . ] In order to contact our customer service via email, please use the email contact form from our Gigaset online portal after selecting your home country. Our representatives are also available on the telephone hotlines for consultation. 1900 545 416 For questions about VoIP access, please contact the respective service provider. Replacement or repair services are not offered in countries where our product is not sold by authorised dealers. [. . . ]