User manual SIEMENS GIGASET C610A

[. . . ] Gigaset C610-C610A, QUG, Grossbritannien, A31008-M2325-L101-1-7643 Pack contents 1 2 Connecting the base station First connect the mains adapter 1. [. . . ] The polarity is indicated in/on the battery compartment. Setting the date and time Set the date and time so that the correct date and time can be assigned to incoming calls, and so that the alarm can be used. Back Calls Time Setting the date and time Save Frequently asked questions Q: There is no dial tone. Q: Message indicator flashing on handset and I cannot retrieve my message. Press the key below Time on the screen display to open the input field. Press the key below Save on the display screen to confirm your entry. a b First insert the battery cover at the top a. Then press the cover b until it clicks into place. Date: Date/Time 31. 01. 2011 If you need to open the battery cover, for instance to replace the batteries, place your fingertip in the cavity on the casing and pull the battery cover upwards. Time: 00:00 The Date/Time submenu is shown on the display. Press the right or left control key to change the input position and correct an entry. Date/Time A: Message indicator will flash to indicate missed call as well as new message or text message. Please refer to Chapter ?Operating the answer machine of the Gigaset C610A base station?You will hear a confirmation tone and the handset will automatically return to idle status. Initial charging and discharging of the batteries The correct charge level can only be displayed if the batteries are first fully charged and discharged. Display in idle status u Reception signal between the base and handset: i V Q: The display is not clear. [. . . ] of user manual. 07:15 INT 1 14 Oct Calls SMS For more QUESTIONS AND ANSWERS please refer to chapter ?Service (Customer Care)? [. . . ]