User manual SIEMENS GIGASET DA610

[. . . ] Gigaset DA610 / en / A30350-M212-A601-1-UZ19 / overview. fm / 23. 04. 2012 Overview Gigaset DA610 1 2 3 4 5 6 7 8 9 10 11 12 Display and keys 1 Display ( page 4) 2 Control key ( page 5) 3 Speed dial key 4 Set key 5 Redial/pause key 6 Recall key 7 Mute key 8 Star key, selecting/deselecting the ring tone (press and hold) 9 Hash key, selecting/deselecting the key lock (press and hold) £ £ 10 Hands-free key 11 Keys for setting the volume of the handset, speaker and ring tone 12 Microphone for hands-free use @ Hands-free key LED ¤ ¤ flashes on incoming call lights up when the call is transferred to the speaker en fr fa ar 1110-01 1 Gigaset DA610 / en / A30350-M212-A601-1-UZ19 / overview. fm / 23. 04. 2012 Connecting the telephone ¤ 2 Connect the telephone connector (1) to the main telephone socket. A mains adapters is not necessary. ¤ 1 Guide the cable through the cable channel (2). ¤ 3 Connect the handset to the telephone using the coiled cable (3). First use 1 2 Lift the handset for 5 seconds and place it back in the cradle. You will hear the free tone and the device is now ready to be used. Please note: The phone is connected to the power source via the phone line. if the PABX is switched off at night), the above mentioned steps need to be repeated. [. . . ] u If the number entered is longer than 32 digits, only the first 32 digits are stored. A single speed dial number cannot be deleted but only overwritten. £ Y Transferring a number from the call list to the phonebook q q ~ ~ Y Open the call list. Select DELETE ENTRY to delete the selected entry or DELETE ALL to delete all entries and confirm with [. Press the control key to confirm the action. Adjusting the telephone To adjust the settings of your telephone you use the K set key. You can make settings in idle mode and when the handset is lifted. Changing the language You can change the language for display messages. Press the key for the desired language: Q English 3 Spanish Deleting an entry / Deleting all entries q q [ K German 2 French 4 Italian 5 Dutch Save your settings and exit the setting mode. 8 1110-01 en fr fa ar Gigaset DA610 / en / A30350-M212-A601-1-UZ19 / telephony. fm / 23. 04. 2012 Setting the date and time You can adjust the current date manually and change the format of the display. You can adjust this setting if necessary ( page 12). Microphone, receiver and melody off. The telephone is completely muted. £ 2 Microphone off, receiver on, melody off. The time setting format is always 24-hour, regardless of the set time format. K 3 Activate setting mode for the date and time. The date and You are still able to hear the person on the end of the line, however they cannot hear you. Save your settings and exit the setting mode. The mute function is activated according to these settings using the mute key during a call ( page 7). £ Setting the ringer Setting the date format K Activate setting mode. 31. 12 ¤ ¤ ¤ The following optional settings are available: Melody and volume VIP melody Switching the ringer off Setting the ring tone and volume You can set the ring tone and volume or switch the ringer off. There are 10 different ring tones available and the volume can be adjusted to 5 levels (0=silent). Note The ring tones are played over the speaker if you lift the handset before commencing with the settings. You can also change both settings directly using the keys while the telephone is ringing ( page 7). Changing the ringer volume K 5 Activate setting mode for the ringer volume. D / E Increase or decrease the volume for the ringer. Press the key code for the desired date format: Q for MM/DD e. g. 12/31 for 31 December K Save your settings and exit the setting mode. Setting the time format £ K Activate setting mode. 5 Q Press the key code for setting the time format. Press the key for the desired time format: 12-hour format K 2 24-hour format or Save your settings and exit the setting mode. Q . . . K Press the set key or [ to save your settings and exit the setting mode. Setting the handset volume The handset volume can be set using the setting mode or changed directly during the telephone conversation using the keys ( page 7). Press the key code for the desired volume: low 2 medium 3 high £ K Changing the ring tone K M Activate setting mode for the ring tone. K Press the set key or [ to save your settings and exit the setting mode. Note The ring tone can only sound perfectly when the ring pulse arriving from the telephone network is long enough. [. . . ] With this Activate setting you can determine whether Automatic an incoming call is coming from a VIP number, and select a VIP ring tone instead of the normal ring tone. AC detection If CLIP does not function with the default setting 0, select setting "1". Deactivate Updates the time automatically Activate according to CLIP information. Deactivate Updates CLIP time according to sysActivate tem time if the CLIP information is not valid. 2 3 4 5 L M N O Q * # Key 1x *) 2x 1 B E H K N Q U X - 3x _ C F I L O R V Y / 4x < 2 3 4 5 6 S 8 Z \ 5x > 6x A D G J M P T W 0 * # **) 7 9 # **) + *) Space **) Shown as in the display. 12 1110-01 en fr fa ar Gigaset DA610 / en / A30350-M212-A601-1-UZ19 / appendix. fm / 23. 04. 2012 Appendix Care Wipe the unit with a damp cloth or an antistatic cloth. [. . . ]