User manual SIEMENS GIGASET E310

[. . . ] Gigaset E310/E310A / Australia / A31008-M2301-C401-1-7619 / Cover_front. fm / 04. 04. 2012 Congratulations By purchasing a Gigaset, you have chosen a brand that is fully committed to sustainability. To learn more, visit www. gigaset. com. Gigaset E310/E310A / Australia / A31008-M2301-C401-1-7619 / Cover_front. fm / 04. 04. 2012 Gigaset E310/E310A / Australia / A31008-M2301-C401-1-7619 / overview. fm / 04. 04. 2012 Overview of handset Overview of handset 1 Display in idle status ( page 17) 2 Display keys ( page 4) 3 Control key ( page 5) 4 Talk/speaker key Accept call; start dialling; toggle between earpiece and speaker mode ( page 27); Lights up: speaker mode activated; Flashes: incoming call 1 INT 1 U 5 Key 1 Call the answering machine (E310A only) ( page 35)/ network mailbox ( page 39) 23. 04. ? 2 3 4 10:53 Menu 6 Star key Ringers on/off (press and hold) 7 0 key/recall key 8 Consultation call (flash): press and hold 8 End call key, on/off key 5 End call; cancel function; go back one menu level (press briefly); back to idle status (press and hold); activate/deactivate handset (press and hold in idle status) 9 Hash key Keypad lock on/off (press and hold, page 20); upper/lower case and digits ( page 60); enter dialling pause (press and hold) 6 7 9 10 10 Microphone Please note To change the display language, proceed as described on page 45. Version 5, 03. 04. 2011 1 Gigaset E310/E310A / Australia / A31008-M2301-C401-1-7619 / overview. fm / 04. 04. 2012 Overview of handset Overview of Gigaset E310A base You can use the keys on the base to operate the integrated answering machine (Gigaset E310 A only), search for handsets ("paging" page 42) and register handsets to the base page 41. 2 7 3 5 6 4 1 1 Registration/paging key: Search for handsets (press briefly, paging page 42). Flashes: message is being played back or recorded. 3 Volume keys: (?= quieter; + = louder. ) During message playback: adjust the speaking volume. [. . . ] If you have new messages, playback will start with the first new message, otherwise with the first old message. A message comprises two parts: u An info block, comprising number/date/time and u The content (spoken message). First, the info block is played black followed by the content. 35 Gigaset E310/E310A / Australia / A31008-M2301-C401-1-7619 / answering_m. fm / 04. 04. 2012 Operating the answering machine The display will alternate between the following (example): Additional functions during message playback Menu 12345678 23. 04. 10:53 Number or name of caller Date/time of call Stopping and controlling playback Controlling message playback depends on when you press the relevant key. Press again to resume. t or During the info block 1 announcement: Skip to the start of the previous message. During playback of the content: Skip to the start of the current message. During playback of the content: Skip to the content of the next message. Press the display key. Delete all old Delete all old messages. Deleting an individual message During playback: Press key Q or display key . Version 5, 03. 04. 2011 Skipping back from the first message means you skip to the last message, skipping forward from the last message means you skip to the first message. If playback is interrupted for over a minute, the answering machine returns to idle status. 36 Gigaset E310/E310A / Australia / A31008-M2301-C401-1-7619 / answering_m. fm / 04. 04. 2012 Operating the answering machine Accepting a call from the answering machine You can still accept a call even when the answering machine has answered a call or is recording: Menu Accept OK If Call Screening has been deactivated via the handset (see following section "Activating/deactivating call screening") or if Call Screening is activated meaning the call cannot be heard on the handset, you can still accept the call by following these steps: u Press the talk key c u Remove the handset from the base/charger (if auto answer is activated, page 46) Please note If Call Screening is activated via the handset and the call can be heard on the handset, you can switch the speaker on and off by pressing the talk key c. If three seconds of the call have already been recorded when you pick it up, the call will be displayed as a new message. Permanently activating/ deactivating call screening Menu q Voice Mail OK q Call Screening OK q Handset /Base OK (?= on) Call screening can be simultaneously activated on the base and handset. Deactivating call screening on the handset for the current recording a Press the end call key. The loudspeaker on the handset is deactivated. Setting up the answering machine The answering machine has already been preset at the factory. You can configure individual settings via the handset. Setting up ring delay You can set the amount of time that elapses before the answering machine is to accept a call. Menu q Voice Mail OK q Ring Delay OK Select Immediately / 10 sec / 18 sec / 30 sec / Auto and press OK (?= on). With Auto the ring delay is as follows: u If there are no new messages, the answering machine answers a call after 18 seconds. 37 q Activating/deactivating call screening Version 5, 03. 04. 2011 While the caller is leaving a message on the answering machine, you can listen in via the loudspeaker on the base or handset. Gigaset E310/E310A / Australia / A31008-M2301-C401-1-7619 / answering_m. fm / 04. 04. 2012 Operating the answering machine u If new messages are present, the answering machine answers a call after 10 seconds. Please note The connection is terminated: u When an incorrect system PIN is entered u After playing back the message(s) Operating the answering machine via the keypad The answering machine is operated using the following keys: A During the number/date/time announcement: Skip to the start of the previous message. Number codes for operation: Previous Setting the message length You can set a maximum message length. Menu q Voice Mail OK q Message Length OK Select the message length OK (?= on) Operating when on the move (remote operation) You can check your answering machine from any other telephone (hotel, pay phone etc. ). Prerequisites: u You have set a system PIN other than 0000 ( page 50). u The phone you are using for remote operation has tone dialling (DTMF) i. e. , you hear different tones when you press the keys. Alternatively, you can use a code transmitter (available from retailers). A D G : Stop/cont. B E H Next 3 F Calling the answering machine and playing messages Dial your own number. [. . . ] Impairments in high-gloss finishes can be carefully removed using display polishes for mobile phones. Specifications Batteries Technology: Nickel-metal-hydride (NiMH) Size: AAA (Micro, HR03) Voltage: 1. 2 V Capacity: 550 - 1000 mAh The device is supplied with two approved batteries. Handset operating times/ charging times Your handset can charge batteries up to a capacity of 1000 mAh. Using special high-performance batteries or batteries with high capacities is not recommended for cordless phones. The operating time of your Gigaset depends on the capacity and age of the batteries and the way it is used. (Standby times/talktimes/operating times are maximum possible times, charging times are typical values. ) Contact with liquid ! If the handset has come into contact with liquid: 1Switch off the handset and remove the battery pack immediately. [. . . ]