User manual SIEMENS GIGASET S820A

[. . . ] Gigaset S820/S820A / GBR / A31008-M2404-L101-1-7619 / Cover_front. fm / 9/17/12 Congratulations! By purchasing a Gigaset, you have chosen a brand ?To learn more, visit www. gigaset. com. Gigaset S820/S820A / GBR / A31008-M2404-L101-1-7619 / Cover_front. fm / 9/17/12 Gigaset S820/S820A / GBR / A31008-M2404-L101-1-7619 / overview. fm / 9/17/12 GigasetS820/S820A ?Touch & Type Status bar ( page 21) Touchscreen/display Icons ( page 64) show the telephone's current settings and operating status. the status page ( V Idle display ( page 17) or menu page ( page 18) Apr Handset keys Side keys Set the volume during a call 26 Thu ? c Talk key Dial displayed number, accept call, ? [. . . ] On the base: Press and hold (at least 3 seconds) the registration/paging key. On the S820H handset (for other handsets see "Notes"): Touch Register ?or Menu key v Settings menu page HS + Base Register This creates a connection to the base, but it may take some time. If necessary, enter the system PIN (default: 0000) Confirm the PIN with. Adjust the handset's setting using the Settings menu item ( page 10). Please note u If six handsets are already registered with the base (all internal numbers occupied) then the most recently registered handset (e. g. , INT 6) is replaced by the new handset. If this attempt is not successful, e. g. , because this handset does not have a connection to the base, the message No free internal number is displayed. ?In this case, de-register another handset that is no longer required and repeat the registration procedure. u You should start the registration procedure for other Gigaset handsets and handsets of other GAP-enabled devices in accordance with the respective operating instructions. Using the handset on multiple bases Your handset can be registered on up to four bases. Alternatively, you can set the handset so that it selects the base with the best reception (Best Base) as soon as the connection to the current base is lost. Touch the selection icon for the desired base or touch Best Base (=selected) Template CES 131x195 1col, Version 1, 12. 03. 2012 Changing a base name or deleting a base Menu key v Settings menu page HS + Base Connect to Base?Delete Base 44 Gigaset S820/S820A / GBR / A31008-M2404-L101-1-7619 / Register-HS. fm / 9/17/12 Multiple handsets De-registering handsets Menu key v Settings menu page HS + Base u You want to de-register the handset currently being used: De-register If necessary, enter the system PIN and confirm with ?If the handset is still registered to other bases, it switches to the base with the best reception (Best Base; page 44). u You want to de-register another handset: Registered Handsets Touchthe handset you want to de-register De-register Handset If necessary, enter the system PIN and confirm with Confirm de-registration with Yes. Paging a handset Press the registration/paging key on the base station ( page 2) briefly. All the handsets ring simultaneously ("Paging"), even if the ringtones are deactivated (Exception: Handsets where the baby phone is activated). Ending the search On the base: Press the registration/paging key again briefly, or On the handset: Press c or a or touch Silence or No action: After approx. 3 minutes, the paging call ends automatically. Changing the handset name When you register multiple handsets the names "INT 1", "INT 2" etc. To change the name: Menu key v Settings menu page HS + Base Changing the name of the handset in use: Touch This Handset or Changing the name of a different handset: Touch Registered Handsets Select handset Touch the name you want to change. 10 alphanumerical characters) Confirm with . Template CES 131x195 1col, Version 1, 12. 03. 2012 Making internal calls Menu key v ?Internal Call If necessary, select a handset from the list or touch All Handsets (group call). After opening the list, press c to initiate a group call to all handsets. Internal calls to other handsets registered to the same base are free of charge. 45 Gigaset S820/S820A / GBR / A31008-M2404-L101-1-7619 / Register-HS. fm / 9/17/12 Multiple handsets Internal consultation/internal transfer You are speaking with an external participant and want to consult an internal participant or transfer the call to him. Consultation Internal If more than two handsets are registered to the base, select one handset or All. Consulting: You consult the internal participant and return to the external call: Touch End. Transferring the external call: You have two options to transfer the external call: You wait until the participant answers your call and then you hang up. Or: You hang up before the participant answers your call: Press a. If the other participant does not answer your call, press End to cancel the consultation call. Call swapping/establishing a conference call You are engaged in one conversation whilst another one is on hold. [. . . ] (All times are maximum possible times. ) Standby time (hours) * Standby time in Eco mode+ (hours) * Talktime (hours) Operating time for 1. 5hours of calls per day (hours) * Operating time in Eco mode+ for 1. 5hours of calls perday (hours) * Charging time in base (hours) Charging time in charger (hours) * Without display backlight 250 180 20 165 105 9, 5 14, 5 76 Gigaset S820/S820A / GBR / A31008-M2404-L101-1-7619 / appendix. fm / 9/17/12 Appendix Information about the USB port u The handset?s battery is charged using a USB connection with a power supply of 500 mA. u On USB connections with lower charging currents, the consumption of the handset itself may be greater than the recharging. In this case the battery charge decreases. Base power consumption S820 In standby mode?0. 75 W General specifications DECT DECT standard GAP standard No. [. . . ]