User manual SIEMENS IRON TB 22...

[. . . ] 36 Template CES 131x195 1col, Version 1, 12. 03. 2012 el en 3 Gigaset S820 QUG / Greek en / A31008-M2404-T101-8U43 / security. fm / 9/4/12 Safety precautions Safety precautions Warning Read the safety precautions and the user guide before use. Explain their content and the potential hazards associated with using the device to your children. Use only the charger cradle indicated on the device. Use only rechargeable batteries that correspond to the specification (see "Technical Data"). Never use a conventional (non-rechargeable) battery or other battery types as this could result in significant health risks and personal injury. [. . . ] The lock reactivates once the call has finished. Activating/deactivating the automatic display lock The display is automatically locked during a call or when listening to the answer machine to prevent inadvertent operation. You can briefly deactivate the lock (for 5 seconds) to operate the telephone via the display. To unlock, slide across the display from left to right, pressing down on the bottom line. ] Template CES 131x195 1col, Version 1, 12. 03. 2012 Slide to unlock ^ Unlocked ^ Please note When the keypad lock is active, you cannot call emergency numbers. 20 el en Gigaset S820 QUG / Greek en / A31008-M2404-T101-8U43 / telefony. fm / 9/4/12 Using the telephone Operating the touchscreen You operate the handset mainly via the display. Icons, list entries, switches and selection areas shown on the display are touch sensitive areas. Touching these areas allows you to set and start functions and navigate between the various display screens (pages). Selecting functions/list entries Touch a list entry or the corresponding icon to select the list item (contacts, submenu, call lists) or to activate/deactivate a function. Scrolling in lists and menus (scrolling vertically) If there are more elements than those shown, a scroll bar appears on the right of the display. Slide your finger vertically over the display while pressing down to scroll through the display. Changing settings (user interface elements) Touch an icon on one of the menu pages to open the corresponding application/function. The display shows the adjustable parameters and their current settings (marked orange), selection options or switches for activating/deactivating an application/function. Examples: Ringtones (Handset) Volume Function Adjust setting (touch Ó/Ô) off Switch: Activate/deactivate the function Call up submenus to adjust settings Crescendo Internal Calls Current setting for Internal Calls Current setting for External Calls 16 Mellow External Calls 06 Gigaset L Return to previous display view; settings are saved Template CES 131x195 1col, Version 1, 12. 03. 2012 Switch: switching functions on/off (activating/deactivating) or selecting functions Touch the switch briefly to activate/deactivate or select/ deselect functions. The function is activated or selected if the switch is orange (text on) or the switch is light grey (‰ icon). Activated/ selected Or Deactivated/ deselected off on ‰ el en 21 Gigaset S820 QUG / Greek en / A31008-M2404-T101-8U43 / telefony. fm / 9/4/12 Using the telephone Selection fields If two or three alternative settings are available for one parameter, these alternatives are displayed in the form of selection fields. ¤ To change it, briefly touch the selection field you require Selection field Call Divert (Example) Call Divert SMS Notification Opening the sub-menu to set a parameter ¤ Briefly touch the parameter field to open the submenu Options and options bar Many displays have an options bar at the bottom. This displays all the actions that you can apply in the current context. Options bar (example) ¤ Touch an option to perform the corresponding action or touch Options to display a list of further options h Conference Options Returning to the previous display You will see the ‘ icon on many pages. Press the end call key a to cancel dialling. Making internal calls Menu key v ¤ ‡ Internal Call ¤ If necessary, select a handset from the list or touch All Handsets (group call). Template CES 131x195 1col, Version 1, 12. 03. 2012 After opening the list, press c to initiate a group call to all handsets. Internal calls to other handsets registered to the same base are free of charge. Accepting a call You have the following options: ¤ Press c ¤ If Auto Answer is activated, remove the handset from the charger Speaker If you are going to let someone listen in, you should tell the other party that this is happening. Activating handsfree mode while dialling ¤ Enter the number and press c twice el en 25 Gigaset S820 QUG / Greek en / A31008-M2404-T101-8U43 / telefony. fm / 9/4/12 Making calls Switching between earpiece and handsfree mode During a call, when establishing the connection: ¤ Press c Place the handset in the charger during a call: ¤ Press and hold the c key while placing the handset in the charger and hold for a further 2 seconds Use the side keys Ô / Ó to adjust the volume for the current mode (handsfree, earpiece, headset) during a call. The setting is saved automatically after approximately 2 seconds and the display returns to the previous screen. Changing the earpiece, handsfree and headset volume Activating/deactivating the microphone (muting) If you turn the microphone off during a call, your caller can no longer hear you. ¤ Touch – to switch the microphone on and off Using provider-specific functions (network services) You have to request these services from your network provider (there may be additional charges). Network services fall into two distinct groups: u Network services that are activated outside of a call for the next call or all subsequent calls (e. g. , "Divert calls to a different phone connection", "Withhold number (no calling line identification)"). You can easily activate/deactivate these network services via the ä Select Services sub-menu on the Settings menu page u Network services that are activated during an external call, e. g. , "Consultation call", "Swap between two callers", "Set up conference calls". These services are provided to you during an external call in the options bar (e. g. , Consul-tation, Conference) For additional information on the network services, see the user guide on the enclosed CD and on the Internet at www. gigaset. com. Template CES 131x195 1col, Version 1, 12. 03. 2012 26 el en Gigaset S820 QUG / Greek en / A31008-M2404-T101-8U43 / telefony. fm / 9/4/12 Contacts (address book) Contacts (address book) Managing contacts entries Opening the contacts Menu key v ¤ œ Contacts or during a call depending on the situation  œ  or Options ¤ Contacts Creating a new entry ¤ ¤ Open the contacts If no entries have been created ¤ New Entry, otherwise ¤ Options ¤ New Entry Enter the components of each entry via the individual fields (name, number, eMail, ring tone, birthday, picture) New Entry Add Name Add Number Add eMail Add Ringtone Where necessary, scroll down to see additional components. Input in the eMail field: pressing the 0 key multiple times allows you to enter frequently used characters: @ . - 0 _ To create an entry, you must enter at least one number. If available, confirm each entry with è. Touch ‘ to exit the menu without saving (exceptions: ring tone and caller picture). L Save The first number in each entry is automatically highlighted in green ( ý ). [. . . ] If the equipment is used in a manner inconsistent with this advice or with the instructions of the manual and on the product itself, this may have implications on the conditions for warranty (repair or exchange of product). In order to make use of the warranty, the product purchaser is asked to submit a receipt which proves the date of purchase (date from which the warranty period starts) and the type of goods that have been purchased. Template CES 131x195 1col, Version 1, 12. 03. 2012 el en 33 Gigaset S820 QUG / Greek en / A31008-M2404-T101-8U43 / telefony. fm / 9/4/12 Customer Service & Assistance Authorisation This device is intended for analogue phone lines in the Greek telephone net. We, Gigaset Communications GmbH, declare that this device meets the essential requirements and other relevant regulations laid down in Directive 1999/5/EC. A copy of the Declaration of Conformity is available at this Internet address: www. gigaset. com/docs Guarantee Certificate Without prejudice to any claim the user (customer) may have in relation to the dealer, the customer shall be granted a manufacturer's Guarantee under the conditions set out below: u In the case of new devices and their components exhibiting defects resulting from manufacturing and/or material faults within 24 months of purchase, Gigaset Communications shall, at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device. [. . . ]