User manual SIEMENS TK 68

[. . . ] I The appliance is ready for use when the illuminated rings on button d 4 and on the on" button 2 5 are lit green. Note: If the appliance is being used for the first time or has not been operated for a prolonged period, the first cup of coffee will not have the full aroma and should not be drunk. For production reasons when switched on for the first time, the water pipe system in the appliance may occasionally have to be refilled: q Place an appropriate cup under the froth nozzle 13. To change the display to the desired language: q Hold down button % on the display 3 for at least 3 seconds. [. . . ] I 4 hours after the last coffee was brewed, a rinsing These settings can be changed see Setting/Programming" chapter. The green illuminated ring flashes while espresso or coffee is being brewed. If the on" button 2 5 is pressed again, the coffee brewing process is terminated. One of 6 settings can be selected by rotating the knob in an anti clockwise direction: SMALL ESPRESSO ESPRESSO SMALL COFFEE COFFEE LARGE COFFEE XXL COFFEE One of 6 settings can be selected for 2 cups by rotating the knob in a clockwise direction: 2 SMALL ESPRESSO 2 ESPRESSO 2 SMALL COFFEES 2 COFFEES 2 LARGE COFFEES 2 XXL COFFEES Outlet 12 has two nozzles for filling 2 cups. This fully automatic espresso/coffee machine grinds fresh coffee for each brewing process. Tip: Prewarm cup(s), especially thick walled espresso cups, on the cup shelf 20 or rinse out with hot water. Q Select the desired amount of coffee and number of cups with rotary knob ( - ( / 8 - 8 6. Q The desired degree of ground coffee can be selected with the Rotary knob for degree of ground coffee 14. Warning Adjust the degree of grinding only while the grinding unit is running!Q While the grinding unit is running, turn the knob to select the degree of grinding: the smaller the dots the finer the ground coffee. I The new setting will not become apparent until The second or third cup is brewed. The time at which the appliance will automatically switch on can be set with this function. Q q q q q q q q De Hold down button % on display 3 for at least 3 seconds. I The switch on time is retained even if there is a power This function is used to specify after how many hours following the last brew the appliance automatically switches to standby mode. I The switch off time is retained even if there is a power the number of brewed espressos , coffees and preground coffees is displayed here. Possible from Standby" mode only q Simultaneously hold down < and > for at least 3 seconds - all your saved settings are deleted. Note: There is always a small amount of water left in the water tank 22. Insert the tray 24 and the tray for coffee dregs 23 until they click into place. Drawer 24 and drawer for coffee dregs 23 are full or contacts 26 are dirty. Remedial action Enter brewing unit 18 or check for correct installation. UNIT MISSING, EMPTY TRAYS or TRAYS MISSING are displayed, coffee cannot be brewed. Note: If the appliance is switched on in a cold state with button d 4 or is set to standby after brewing coffee, the appliance is automatically rinsed. [. . . ] Q Carefully take out the brewing unit 18 by the handle and clean under running water. Important: Clean without detergent and do not put into the dishwasher. Q q q q q Vacuum the interior of the unit or wipe out using a damp cloth. Q While keeping the red button 18a pressed, turn handle 18b downwards as far as it will go. [. . . ]