User manual SONY DVP-NC80V

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY DVP-NC80V. We hope that this SONY DVP-NC80V user guide will be useful to you.


SONY DVP-NC80V : Download the complete user guide (3653 Ko)

You may also download the following manuals related to this product:

   SONY DVP-NC80V (792 ko)
   SONY DVP-NC80V (3699 ko)

Manual abstract: user guide SONY DVP-NC80V

Detailed instructions for use are in the User's Guide.

[. . . ] 2-591-934-11(1) CD/DVD Player Operating Instructions DVP-NC80V © 2005 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. For customers in the U. S. A Owner's Record The model and serial numbers are located at the rear of the unit. Refer to them whenever you call upon your Sony dealer regarding this product. DVP-NC80V Serial No. ______________ Notes About the Discs · To keep the disc clean, handle the disc by its edge. [. . . ] · You can also check the time information and text using the Control Menu (page 13). 43 Sound Adjustments Changing the Sound When playing a DVD VIDEO Depending on the DVD VIDEO, the choice of language varies. See "Language Code List" on page 81 to see which language the code represents. When the same language is displayed two or more times, the DVD VIDEO is recorded in multiple audio formats. When playing a DVD-VR mode disc The types of sound tracks recorded on a disc are displayed. Example: · 1: MAIN (main sound) · 1: SUB (sub sound) · 1: MAIN+SUB (main and sub sound) When playing a VIDEO CD, CD or DATA CD/DATA DVD (MP3 audio) The default setting is underlined. · STEREO: the standard stereo sound · 1/L: the sound of the left channel (monaural) · 2/R: the sound of the right channel (monaural) When playing a Super VCD The default setting is underlined. · 1:STEREO: the stereo sound of the audio track 1 · 1:1/L: the sound of the left channel of the audio track 1 (monaural) · 1:2/R: the sound of the right channel of the audio track 1 (monaural) · 2:STEREO: the stereo sound of the audio track 2 · 2:1/L: the sound of the left channel of the audio track 2 (monaural) · 2:2/R: the sound of the right channel of the audio track 2 (monaural) When playing a DVD VIDEO recorded in multiple audio formats (PCM, Dolby Digital, or DTS), you can change the audio format. If the DVD VIDEO is recorded with multilingual tracks, you can also change the language. With CDs, DATA CDs, DATA DVDs or VIDEO CDs, you can select the sound from either the right or left channel and listen to the sound of the selected channel through both the right and left speakers. For example, when playing a disc containing a song with the vocals on the right channel and the instruments on the left channel, you can hear the instruments from both speakers by selecting the left channel. AUDIO 1 Press AUDIO during playback. The following display appears. 1:ENGLISH DOLBY DIGITAL 3/2. 1 Notes · While playing a Super VCD on which the audio track 2 is not recorded, no sound will come out when you select "2:STEREO, " "2:1/L, " or "2:2/R. " · You cannot change the sound for Super Audio CDs. 2 Press AUDIO repeatedly to select the desired audio signal. 44 Checking the audio signal format You can check the audio signal format by pressing AUDIO repeatedly during playback. The format of the current audio signal (Dolby Digital, DTS, PCM, etc. ) appears as shown below. Surround Mode Settings Example: Dolby Digital 5. 1 ch Rear (L/R) LFE (Low Frequency Effect) You can enjoy surround sounds while playing discs including Dolby Digital and DTS DVDs, even if you have only 2 or 4 speakers. Select the surround mode that best suits your speaker setup. 1:ENGLISH DOLBY DIGITAL 3 / 2 . 1 SUR Sound Adjustments Front (L/R) + Center L LS C LFE R RS Currently playing program format Example: Dolby Digital 3 ch Front (L/R) Rear (Monaural) 1 Press SUR during playback. The following display appears. TVS DYNAMIC THEATER 2:SPANISH DOLBY DIGITAL 2 / 1 L S R 2 Press SUR repeatedly to select one of the surround modes. See the explanations given for each item in the following section. For 2 speaker setups · TVS DYNAMIC THEATER · TVS DYNAMIC · TVS WIDE · TVS NIGHT · TVS STANDARD For 4 to 6 speaker setups (If you select "NONE" in the setting of "REAR" in "SPEAKER SETUP" (page 71), you cannot select these modes. ) · NORMAL SURROUND · ENHANCED SURROUND · VIRTUAL REAR SHIFT · VIRTUAL MULTI REAR · VIRTUAL MULTI DIMENSION , continued Currently playing program format About audio signals Audio signals recorded in a disc contain the sound elements (channels) shown below. · Front (L) · Front (R) · Center · Rear (L) · Rear (R) · Rear (Monaural): This signal can be either the Dolby Surround Sound processed signals or the Dolby Digital sound's monaural rear audio signals. · LFE (Low Frequency Effect) signal 45 To cancel the setting Select "OFF" in step 2. For 2 speaker setups When you connect a stereo TV or 2 front speakers, TVS (TV Virtual Surround) lets you enjoy surround sound effects by using sound imaging to create virtual rear speakers from the sound of the front speakers (L: left, R: right) without using actual rear speakers. TVS was developed by Sony to produce surround sound for home use using just a stereo TV. Furthermore, if the player is set up to output the signal from the DIGITAL OUT (OPTICAL or COAXIAL) jack, the surround effect will only be heard when "DOLBY DIGITAL" and "DTS" are set to "D-PCM" in "AUDIO SETUP" (page 70). TVS DYNAMIC THEATER Creates one set of LARGE virtual rear speakers and virtual subwoofer from the sound of the front speakers (L, R) without using actual rear speakers and subwoofer (shown below). This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV. TV Sub woofer TVS WIDE Creates five sets of virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below). This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV. TV TVS NIGHT Large sounds, such as explosions, are suppressed, but the quieter sounds are unaffected. This feature is useful when you want to hear the dialog and enjoy the surround sound effects of "TVS WIDE" at low volume. TVS STANDARD Creates three sets of virtual rear speakers from the sound of the actual front speakers (L, R) as shown below. [. . . ] The picture data uses the MPEG 2 format, a worldwide standard of digital compression technology. The picture data is compressed to about 1/40 (average) of its original size. The DVD also uses a variable rate coding technology that changes the data to be allocated according to the status of the picture. Audio information is recorded in a multi-channel format, such as Dolby Digital, allowing you to enjoy a more realistic audio presence. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY DVP-NC80V




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY DVP-NC80V will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.