Detailed instructions for use are in the User's Guide.
[. . . ] For the customers in the United States
The following FCC statement applies only to the version of this model manufactured for sale in the USA. Other versions may not comply with FCC technical regulations.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
For the customers in Europe Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. [. . . ] When you set CONT to "ON, " you can play back all messages in a folder continuously.
GB
1 Press and hold DISPLAY/MENU to
enter the menu mode. The menu mode window will be displayed.
4 Press (stop) to exit the menu
mode.
2 Press or + to select
"CONT, " then press PLAY/ STOP·ENTER.
3 Press or + to select "ON, "
then press PLAY/STOP·ENTER.
GB
Playing Back a Specified Section Repeatedly A-B Repeat
2 Press
(repeat) A-B again to specify the finishing point B. " " and "A-B" are displayed and the specified section is played back repeatedly.
To resume normal playback
Press PLAY/STOP·ENTER.
To stop A-B Repeat playback
Press (stop).
A-B
PLAY/STOP·
To change the segment specified for A-B Repeat playback
During A-B Repeat playback, press (repeat) A-B again to specify a new starting point A. Notes
Playback
ENTER
1 During playback, press
"A-B B" flashes.
(repeat) A-B to specify the starting point A.
You cannot specify the finishing point B before the starting point A has been set. You cannot set point A and point B at the very beginning (0. 5 seconds from the beginning) or at the very end (0. 5 seconds prior to the end) of the message.
GB
Adjusting the Playback Speed the DPC Function
1 Press and hold DISPLAY/MENU to
enter the menu mode. The menu mode window will be displayed.
DISPLAY/ MENU
2 Press or + to select "DPC, "
then press PLAY/STOP·ENTER.
PLAY/ STOP· ENTER
,
+
3 Press or + to select "ON, "
When you set "DPC" to "ON, " you can adjust the playback speed between +100% and 50% of normal speed in the menu. The message is played back in natural tones thanks to the digital processing function. then press PLAY/STOP·ENTER.
0
GB
4 Press or + to adjust the
You can set the speed by 10% for + setting and by 5% for setting.
speed of the playback, then press PLAY/STOP·ENTER.
Recording with Other Equipment
To audio input Tape recorder, connector etc.
5 Press (stop) to exit the menu
mode.
To (headphone) jack
Playback
To resume normal playback
Set "DPC" to "OFF" in step 3.
PLAY/ STOP· ENTER
1
GB
To record the sound of the IC recorder with other equipment, connect the (headphone) jack of the IC recorder to the audio input connector (minijack, stereo) of other equipment using an audio connecting cable*.
* Optional audio connecting cables (not supplied)
To the IC recorder RK-G139 RK-G136 Stereo mini-plug Stereo mini-plug
To the other equipment Mini-plug (monaural) Stereo mini-plug
1 Connect the (headphone) jack
of the IC recorder to the audio input connector (stereo minijack) of other equipment using an audio connecting cable*. playback and at the same time set the connected equipment to the recording mode. A message from the IC recorder will be recorded on the equipment connected.
Note
2 Press PLAY/STOP·ENTER to start
Your dealer may not handle some of the above listed optional accessories. Tip Before you start recording, we recommend you to make trial recording first.
3 Press (stop) on the IC recorder
and the connected equipment at the same time to stop recording.
GB
Playing Back a Message at a Desired Time with an Alarm
1 Select the message you want to
play back with an alarm.
2 Enter the alarm setting mode.
Press and hold DISPLAY/MENU to
DISPLAY/ MENU
enter the menu mode. Press or + to select "ALARM, " then press PLAY/STOP·ENTER. (If the alarm has already set to the selected message, "ALARM ON" is displayed. If you do not wish to change the setting, press (stop) and exit the menu mode. )
Playback
,
+
PLAY/ STOP· ENTER
You can sound an alarm and start playback of a selected message at a desired time. You can have the message played back on a specified date, once every week, or at the same time every day.
Note
"ALARM OFF (or ON)" will not appear and the alarm cannot be set if the clock has not been set or no message has been recorded in the selected folder.
GB
Press or + to select "ON, " then press PLAY/STOP·ENTER.
4 Press or + to select the
alarm sound either from "B-ONLY" or "B-PLAY, " then press PLAY/ STOP·ENTER.
3 Set the alarm date and time.
Press or + to select "DATE, " a
day of the week, or "DAILY, " then press PLAY/STOP·ENTER. When you select "DATE": Set the year, month, day, hour, and minute in sequence, as described in "Step 2: Setting the Clock" on page 14, then press PLAY/STOP·ENTER. When you select a day of the week or "DAILY": Press or + to set the hour, then press PLAY/STOP·ENTER, press or + to set the minute, then press PLAY/ STOP·ENTER.
B-ONLY: Only the alarm will sound. "ALARM ON" will be displayed.
5 Press (stop) to exit the menu
mode. The setting process is finished and "" (alarm indicator) appears in the display window.
GB
When the set date and time comes
At the set time, the alarm will sound for about 10 seconds and the selected message will be played back. (If you have selected "B-ONLY, " only the alarm will sound. ) During playback, "ALARM" will flash in the display window. When the playback ends, the IC recorder will stop automatically at the beginning of that message.
To change the alarm setting
Start from step 2 on page 43.
To cancel the alarm setting
Follow steps 1 and 2- on page 44. In step 2-, press or + to select "OFF, " and press PLAY/STOP·ENTER. [. . . ] You cannot add a recording or overwrite a recording because "REC-OP" is set to "OFF. " Set it to "ON. " A system error other than the above has occurred. Take out the batteries and insert them again (page 11).
OFF REC-OP ERR ACCESS ERR 01 ERR 05
GB
System limitations
There are some system limitations of the IC recorder. Troubles as mentioned below are not malfunctions of the IC recorder.
Symptom You cannot record messages up to the maximum recording time. Cause/Remedy
If you record messages in a mixture of SHQ, HQ, SP or LP modes, the recordable time varies from the maximum SHQ mode recording time to the maximum LP mode recording time. [. . . ]